Content | AIR10: Versatile, customizable, and easy to transport.
Compact and lightweight, AIR10 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR10 gives you all the power and tools you need for both mobile and installed sound.
The best of two worlds.
Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR10 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range. A 500W (continuous), Class D amplifier powers the 10-inch low-frequency driver, providing efficient, clean low end when you need it. A 200W (continuous), Class AB amplifier powers the 1-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end. The combination can deliver up to 121 dB SPL of sweet, clear sound between 66 Hz and 20 kHz.
Fast and easy customization.
The AIR10 loudspeaker is equipped with an easy-to-use signal processor that makes it simple to customize your loudspeakers with the push of a button. Presets customize the AIR10’s response for use as front-of-house mains; as monitor wedges; for music playback (e.g., for DJs); for enhanced low end and a warmer sound; and for improved speech intelligibility. Treble and bass controls let you boost or cut by 10 dB to compensate for room anomalies. Location presets let you optimize performance for stand and bracket mounting as well as flown installations.
Versatile mounting for a variety of applications.
The AIR10’s molded plastic cabinet can be mounted in several ways, providing tremendous versatility. The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications. Rig the speaker using M10 fly points or ground-stack it for portable applications. Mount it on a tripod or atop an AIR-series subwoofer using an optional sub pole. The integrated dual-position pole mount lets you aim the speaker level or at a 7.5˚ downward tilt. And the AIR10 is easy to transport, thanks to its top-mounted handle.
You’ll be floored.
If you place a loudspeaker against a hard surface such as a wall or floor, the low frequencies emitted from the rear of the enclosure propagate back into the room. This effect, called "half-space loading,” can increase the output of bass frequencies by as much as 6 dB, and it is an unavoidable issue with floor monitors. Most PA speakers in this class simply roll off excess low frequencies with a highpass filter—a half-baked compensation for half-space loading. In contrast, AIR-series full-range loudspeakers offer a Monitor preset that uses DSP to retune the speaker to both compensate for bass buildup and maintain a tight mid-bass response, while suppressing problematic frequencies to reduce feedback.
Flexible inputs.
AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources. You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control. A stereo 1/8” connection admits signals from smartphones, tablets, and other consumer audio devices. These signals can be combined with the AIR10’s internal mixer, and a balanced XLR Mix output lets you send pass the signals to other AIR-series loudspeakers.
A sweet-sounding solution.
With their "best of both worlds” power-amp configuration, carefully programmed DSP presets, versatile mounting options, flexible inputs with onboard mixing, and other professional features, PreSonus AIR-series loudspeakers are an excellent choice for both mobile and installed sound. You’ll love their easy transportability and their affordability. But the best thing about AIR-series loudspeakers is their clear, natural, "AIR-y” sound. Don’t just take our word for it, though. Check out AIR-series loudspeakers at your favorite PreSonus dealer.
Technical Specifications
Transducer
| |
LF Driver |
10” (2” voice coil) |
HF Driver |
1” compression |
Amplifier
| |
Amplifier Type |
Class D (LF), Class AB (HF) |
Total System Power |
1,200W (Peak) |
LF Power |
900W |
HF Power |
300W |
1 x XLR Mix Out
Connections and Controls
| |
Inputs |
2 x XLR/TRS mic/line combo; 1 x 1/8” TRS stereo |
Outputs |
|
Acoustic Performance
| |
Configuration |
Active 2-way |
Frequency Range (-3 dB) |
66 Hz to 20 kHz |
Frequency Range (-10 dB) |
55 Hz to 20 kHz |
Crossover Frequency |
2.2 kHz |
Maximum Output |
121 dB SPL |
Nominal Dispersion (HxV) |
90˚x 60˚
|
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
|
With a 12" woofer and a 1" titanium compressor driver, the EKX-12P from Electro-Voice is a powered two-way Loudspeaker providing 1500W of Class D amplification. It\'s suitable in live-music scenarios, lecture setups, and generalized nightclub use. The loudspeaker\'s integrated QuickSmartDSP technology can be modified using the LCD-based menu-navigation screen and the single-knob user interface. Four presets of DSP are provided for various settings—Music, Live, Speech, and Club—though EQ manipulation and five user-programmable presets are all adjustable. Visual monitoring of your limiter, input metering, and master volume allow you to gain-stage properly.
Its on-board amplifier can deliver up to 132 dB of SPL, its frequency response ranges from 50 Hz to 20 kHz at -10 dB, and its intelligent thermal-management system controls fan-speed by means of multiple built-in sensors, thus reinforcing the durable performance of this speaker (whose 15mm wooden enclosure is fronted by an 18 AWG steel grille). Electro-Voice\'s SST waveguide design provides measured and dependable coverage of a given area, and the speaker\'s Cardioid Control Technology allows you to steer output towards the audience while reducing levels up to 35 dB on stage when multiple subwoofers are employed.
For convenience in mounting and transport, this loudspeaker boasts eight M10 threaded mounting points, aluminum pole mounts, and metallic handles; as such, it can be mounted on a tripod stand, on a pole above your subwoofer, or utilized as a floor monitor for artists on stage. You can feed the speaker sweet, sweet audio via RCA inputs or XLR/1/4" combination jacks, and you can link it to other monitors via an XLR link-output.
Connectors |
1 x stereo RCA input 2 x XLR/TRS combo jack 1 x XLR, link output |
Coverage |
Nominal: -6 dB Horizontal: 90° Vertical: 60° |
Crossover Frequency |
1.7 kHz |
Enclosure Material |
15 mm Plywood with EVCoat |
Frequency Response |
-10 dB: 50 Hz - 20 kHz -3 dB: 60 Hz - 18 kHz |
Grille |
18 AWG steel with powdercoat |
Transducer |
HF: DH-1M 1" titanium compression driver LF: EVS-12M 12" (300 mm) |
Maximum SPL |
132 dB 132 dB maximum SPL is measured at 3.3\' / 1 m using broadband pink noise at maximum output |
Power Consumption |
1.8 A Current rating is 1/8 power |
Power Rating |
1500 W |
Suspension |
8 x M10 threaded mounting points |
Dimensions |
23.9 x 14.76 x 14.02" / 60.7 x 37.5 x 35.6 cm |
Weight |
41.45 lb / 18.8 kg |
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 12-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 135 dB peak SPL
Frequency Range | 43 Hz - 20 kHz | Maximum SPL | 135 peak dB | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A | Power Rating | 2000 W | Frequency Response | 55 Hz - 20 kHz | Coverage (Nominal -6 dB) H | 90 ° | Coverage (Nominal -6 dB) V | 60 ° | LF Transducer | SMX2120 300 mm (12 in) | HF Transducer | DH3-B 1.25-in titanium compression driver | Crossover Frequency | 1600 Hz | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 613 mm (24.13“) | Width | 381 mm (15“) | Depth | 400 mm (15.75“) | Weight Net | 23.6 kg (52.03 lbs) | Shipping Weight | 26.8 kg (59.08 lbs) |
| - 2-way active 12” bass reflex PA speaker
- High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
- Multi-purpose design for fullrange, satellite and monitor applications
- Application presets for quick frequency response contouring
- BEM optimized HF waveguide for uniform coverage
- 12” custom woofer and BMS compression driver
- DynX® DSP technology for distortion-free performance
- 2 line/mic input channels with individual gain controls plus mono mix out
- 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Woofer voice coil (mm)
63.5 mm
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
58 - 20000 Hz
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
- 40 °C
Relative Humidity:
<80% (non-condensing)
Cabinet material
15 mm Plywood
Cabinet construction
vented
|
The full range 12" two-way, SRX812P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBLʼs long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBLʼs flagship touring systems. |
Reviews
There are no reviews yet.