PRESONUS STUDIO 192 Mobile 22×26 USB 3.0 Audio Interface and Studio Command Center

The PreSonus® Studio 192 Mobile USB 3.0 audio interface delivers exceptional sonic fidelity, flexible connectivity, and professional monitoring and mixing controls in a compact desktop design. Whether you’re a producer, an audio engineer, an independent band, a sound designer, or all of the above, your Studio 192 Mobile was built for you to create.   The Studio 192 Mobile provides an integrated, portable, hardware and software solution for recording in personal and professional studios wherever they may be. Switch between any two mixes using the Cue function and the onboard headphone amp. Software-controlled Dim and Mono options let you take control of your main mix. Use the six balanced outputs for monitor mixing or speaker switching, or both, depending on how you work. With its flexible software and abundant I/O, the Studio 192 Mobile fits into any recording and production environment.   Connect a Studio 192 Mobile and you’ll instantly hear details and an open high end you expect from a professional studio front end. The Studio 192 Mobile operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality Burr-Brown converters on every input and output provide 118 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our recallable XMAX microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you’ll hear every breath, transient, and detail in your recordings.   At PreSonus, we know that the microphone preamplifier is a key component in the sonic quality of a recording. The Studio 192 Mobile includes two custom-design, high-voltage, Class A XMAX preamps with discrete components for accuracy and transparency.   XMAX preamplifiers are built with three key elements:   Class A. Class A circuits have no crossover distortion and deliver purer, clearer, and more musical results than the Class AB designs that are found in many preamps. High Voltage. The XMAX preamplifier runs on power rails of 30V. Most off-the-shelf, op-amp-based designs run on power rails of 10V to 18V. Higher-voltage power rails deliver more headroom, deeper lows, smoother highs, and a richer overall sound. Discrete components—not op-amps. We only use genuine transistors, resistors, and capacitors. Op-amps add noise, coloration, and harshness to a signal. Our discrete design delivers ultra-low noise and transparency. The net result of the XMAX preamp design is high headroom, low noise, wide dynamic range, extended frequency response, and—most important—musicality and transparency.   The Studio 192 Mobile’s XMAX preamps offer another advantage: They are recallable. In 1995, PreSonus patented digital control over analog circuits with our first studio product. Building on this legacy, we created a separate digital volume-control circuit ahead of our analog XMAX preamp design, providing the convenience of digital recall without sacrificing fidelity. The preamps can be controlled from the unit’s front panel, from UC Surface control software, from Studio One’s mixer, from Studio One Remote, and via MIDI in Pro Tools, Logic, or Live so you can save the settings with your recordings.   With the Studio 192 Mobile, your audio interface is an integrated extension of your recording environment. Launch Studio One® 3, and you’ll find full preamp control and monitor-mix functions integrated into your recording environment. Our hybrid Fat Channel plug-in runs on the Studio 192’s DSP and in Studio One on your computer so you can record and monitor with Studio 192-based processing and seamlessly switch to the Studio One Fat Channel for playback. Need to track away from your computer? Launch Studio One Remote on your iPad®.   The Studio 192 Mobile’s onboard features can also be controlled in PreSonus’ free UC Surface control software, so even if you use third-party recording software, you can remotely access them. UC Surface has rapidly won accolades for an intuitive mixing interface that provides quick access to everything you need to create quality monitor mixes.   Managing both a monitor-mixing application and your DAW can be challenging if you don’t have multiple screens. Because UC Surface can be run wirelessly on a Windows touchscreen computer or iPad, you don’t have to share screen real estate with your DAW. This also allows your musicians to dial in their monitor mixes remotely without adding an expensive personal monitor system.   In addition to creating high-quality monitor mixes, UC Surface can also be used to turn your Studio 192 Mobile into a speaker-management system by providing speaker switching plus main-mix mono and dim functions. Listening to your mix on multiple pairs of reference monitors can reveal new insights. Enabling speaker-switching mode in UC Surface allows you to listen to your main mix through three different output pairs on your Studio 192 Mobile and switch between them.   Adding just the right amount of effects and processing to a monitor mix can make a huge difference in a musician’s ability to experience their performance naturally. To that end, the Studio 192 Mobile includes Studio One Fat Channel plug-in processing on every analog input and the first ADAT inputs, plus a stereo reverb and delay. The result is a better performance and a better recording.   The Fat Channel suite of studio-grade signal processors evolved from our classic ACP88 compressor/gate and was first incorporated into our StudioLive mixers. The musical, natural sound of the combined signal path quickly made StudioLive mixers famous for their ability to help create great-sounding mixes.   The Fat Channel includes a highpass filter, noise gate with key listen, compressor, 4-band parametric equalizer, and limiter. Fifty factory presets, created by professionals, are included to help you quickly create the sound you want. Fat Channel presets can be created in UC Surface or in Studio One and can be shared between the two. You can also share settings with other Studio One, StudioLive, and Studio 192 users.   The Studio 192 Mobile has 18 digital inputs and outputs, allowing you to add more analog I/O when you need it. The DigiMax DP88 preamp/converter was designed to seamlessly extend the analog I/O on the Studio 192 Mobile with eight digitally-controlled XMAX preamps, ADAT I/O support up to 96 kHz, direct analog inputs, DAC outputs, and word clock I/O. Its mic preamps are fully remote-controllable from UC Surface, Studio One, and Studio One Remote when connected via ADAT Lightpipe to the Studio 192 Mobile so that they naturally extend your analog inputs both sonically and functionally.   The Studio 192 Mobile gives you a powerful combination audio interface and studio command center. With pristine audio up to 192 kHz, Fat Channel DSP effects, remote-controllable preamps, monitor mixing, speaker switching, a headphone amp, and unprecedented Studio One integration, it gives you a portable recording solution like no other.  

Χαρακτηριστικά:

• Compatible with most recording software for Mac and Windows
• Simultaneous I/O up to 22 inputs/26 outputs (8x14 at 192 kHz)
• Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel and UC Surface
• 2 front-panel combo microphone/instrument inputs
• 2 XMAX remote-controllable mic preamps with individually switched 48V phantom power
• 2 balanced, line level, direct-to-ADC inputs, available via dual-purpose rear-panel combo jacks
• 4 balanced ¼” TRS outputs for monitor mixing and speaker switching
• ADAT Optical/Dual SMUX inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channels at 88.2 or 96 kHz
• Stereo S/PDIF coaxial input and output
• 1 high-volume headphone output with dedicated DAC
• BNC word clock input and output with low-jitter clocking
• USB 3.0 audio interface
• USB 2.0 compatible
• 24-bit resolution and up to 192 kHz sampling rate
• Top-quality 118 dB A/D/A converters
• Road-rugged construction with all-metal chassis and metal knobs
• 1U rack-mountable
• 18 VDC external power supply (included)

Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.

The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.

Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.

The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.

The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.

If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.

The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

The Yamaha GO44 is a mobile audio solution that features high quality line
inputs/outputs and worldclass MIDI and audio recording software enabling
professional quality recording to a computer in a very compact package that
can be carried and used virtually anyway.
The Yamaha GO44 boasts up to 24-bit/192kHz resolution on the analog inputs/
outputs - the best in its class - and 24-bit/96kHz on the digital I/O. This pro-level
quality makes the Yamaha GO44 perfect for any type of recording, and allows
you to capture the full details and nuances of the original source - from the
breathiness of a vocal to the delicate finger slides of an acoustic guitar performance.

The Yamaha GO44 features 4-in/4-out multi-channel audio, with two analog phone
jack terminals for both input and output, and special S/P DIF coaxial terminals for
two-channel digital in/out. This device is simple and easy to use, yet provides high-quality
recording capability - perfect not only for those who want to create music, but also
for those who want an audio playback system for their computer that delivers
outstanding sound quality.

The digital outputs on the Yamaha GO44 are compatible with the AC-3 and DTS
surround sound formats. Simply connect a surround compatible amplifier/speaker
setup, and enjoy the powerful sonic experience of surround sound.

Yamaha GO44 Features:
FireWire audio interface
Durable aluminum die cast body
Simple, small and light weight
2 x Balanced Line inputs / outputs
Headphones output on Front Panel
1 MIDI In /1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible

Yamaha AUDIOGRAM3 Computer Recording System Specifications:

• Mic/Hi-Z input: 1
• Audio Format: USB AUDIO 1.1, 16bit/44.1kHz
• Combo Connectors: 1
• Stereo In connectors: Phone connector x 2 (L/MONO x 2, R x 2)
• USB Connector: To Host x 1
• Headphone connector: Stereo Phone connector x 1
• Stereo Out connector: Phone connector x 2 (L, R)
• Power Supply: USB powered
• Dimensions (W x H x D): 180 mm x 61 mm x 112 mm (7-1/8" x 2-3/8" x 4-3/8“)
• Accessories: CUBASE AI DVD, Owner's Manual, USB Cable
  
  System Requirements
• Windows Vista
• Windows-based computer with built-in USB interface
• OS: Windows Vista
• CPU: 1GHz or better Intel Core / Pentium / Celeron processor
• Memory: More than 1GB
  
  Windows XP
• Windows-based computer with built-in USB interface
• OS: Windows XP Professional / XP Home Edition
• CPU: 750MHz or better Intel Core / Pentium / Celeron processor
• Memory: More than 128MB
  
  Macintosh
• Macintosh computer with built-in USB interface
• OS: Mac OS X 10.3.3 or higher
• CPU: Intel CPU / Macintosh G3 processor 300 MHz or better
• Memory: More than 128MB
  
  Cubase AI4 System Requirements:
• 
  
• Windows
• OS: Windows XP Professional SP1 / XP Home Edition SP1 / Windows Vista (32-bit)
• CPU: Intel Pentium 1.4GHz or better
• Available Memory: More than 512MB
• Hard Disk: Free disk space of 1GB or more
• Audio Interface: Windows DirectX / ASIO compatible
  
  Macintosh
• OS: Mac OS X 10.4 or higher
• CPU: Power Mac G4 1GHz or Core Solo 1.5GHz or better
• Available Memory: More than 512MB
• Hard Disk: Free disk space of 1GB or more

The SONAR REAC Recording System when used in conjunction with the RSS V-Mixing System or RSS Digital Snakes provides the most comprehensive live recording, mixing, mastering and delivery product available. This is the next phase in product development of the REAC driver, which Cakewalk engineered for Roland as a way for users to record from their Digital Snake/V-Mixer System directly into SONAR. The SONAR REAC Recording System includes:

* SONAR 8 Producer
* REAC Driver Kit
* Cakewalk Approved Hardware Monitoring Device
* SONAR Templates
* Users Guides

The REAC protocol provides up to 40 channels of audio to be sent via a single CAT5e Ethernet or fiber optic cable. The REAC driver, developed by Cakewalk, allows the REAC output from the RSS V-Mixer or RSS Digital Snake to connect directly into a PC using a single Ethernet cable.

SONAR 8 Producer gives you what you need for recording, composing, editing, mixing, and mastering. Get innovations that matter, from exclusive features to ignite creativity and perfect your tracks, to groundbreaking technologies that always keep you in control, all backed by the industry's leading 64-bit audio quality. And SONAR 8 Producer delivers the go-to production tools you want with the best collection of virtual instruments, mixing, and mastering effects found in any DAW.

With unlimited tracks, amazing creative tools, inspiring virtual instruments, the freedom to work with any audio interface or control surface, and the most complete delivery capability for collaboration with users of other DAWS, award-winning SONAR Producer is your best choice in a digital audio workstation.

SONAR 8 is the only DAW that offers one-of-a-kind music creation tools that actually help in the songwriting process. Whether you are searching for new ideas or looking to add musical parts to existing songs, SONAR 8 can help you break through those creative blocks.

SONAR 8 provides the most comprehensive recording features of any DAW on the market today. It's designed to meet the needs of even the most demanding professional—whether recording a solo performance, a band, or even an orchestra.

Recommended System Requirements:

* Operating System: Windows XP (32 bit), Windows Vista (32 bit or 64 bit)
* Processor Speed: Intel Core 2 Duo 2GHz or higher
* RAM: 3 GB for 40 Channel Recording
* Ethernet Port Speed: Gigabit Ethernet/CAT5e Only
* Graphics: 1280 x 960, 24-bit color or higher
* Audio Hard Drive Size: 30 GB
* Audio Hard Disk Type: RAID 0 with (2) SATA drives
* Audio Interface: SPS/FA-66 FireWire Audio Interface or Cakewalk VS-700 R
* Media Drive: DVD-ROM, DVD+/-R or DVD+/-RW
* Other Hardware: RSS Digital Snake or V-Mixing System, Roland CAT5e Cables (supplied with Digital Snakes), Gigabit Ethernet Switch (optional)
* Other Software: Adobe Acrobat