Content |
BM103T Microphone call station designed for use with gooseneck microphones, equipped with connectors and XLR-3P socket. It requires phantom power and can be combined with any PROEL integrated amplifiers and mixers. Scratch-proof plastic housing, microphone on/off button.
Specifications
Controls :ON/OFF SWITCH
Output Connectors :INPUT: 1x XLR OUTPUT: 1x XLR
Dimensions (W x H x D) :120 x 130 x 50 mm
Weight:0.7 kg (1.5435 lb)
|
Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.
Specification |
| Power Source | 24V DC (Supplied from the optional IR-702T) | Current Consumption | Max.60mA | Infrared Detector | | Wavelength | 870nm | Carrier Frequency | Channel A:3.100MHz/Channel B:3.350MHz | Reception Area | Practical radius of approx. 8 m in a space without any obstacle | Connection Terminal | 75 Ω, BNC jack | Operating Temperature | 0ºC to +40ºC | Operating Humidity | 30% to 85% RH | Finish | Case: Polycarbonate resin, visible light cut filter Base: ABS resin, black | Dimensions | 120 x 71.3 (H) mm | Weight | 205g (unit only) |
|
|
- DOT MATRIX DESIGNED VFD DISPLAY
- USB RECORDING(USING USB MEMORY STICK MP3 FILE)
- HIGH FIDELITY 60W MONO CHANNEL AMPLIFIER
- BUILT-IN MONITOR SPREAKER WITH CONTROL VOLUME
- 3 BAND EQUALIZER
- EXTRA MICROPHONE JACK WITH VOLUME
- AUX INPUT AUX OUT LINE INPUT LINE OUT
- CONNECTING: 30 MIC UNIT
- EXPANSION CAPABILITY |
|
|
|
|
Dot MATRIX designed VFD Display |
USB Recording (Using USB Memory stick, MP3 file) |
High fidelity 60W mono channel amplifier |
Built-in monitor speaker with control volume |
3 Band equalizer |
Extra Microphone Jack with Volume |
AUX input, AUX out, LINE input, LINE out |
Connecting : 30 MIC unit |
Expansion capability with IMS-300 (Sub amplifier) |
Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements) |
Weight : 5.8kg / 12.78lb |
Dimensions (W x H x D) : 482 x 44 x 380 mm / 19 x 1.75 x 15in |
※ Specifications and design subject to change without notice. |
|
|
|
|
Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.
The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).
As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.
|
- System Features and Outline
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | Power Consumption | 72W | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | Output | REC: -20 dB*, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | Number of Connectable Chairman/Delegate Units | 64 units | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | External Control Terminal | D-sub connector (9 P, male) | LED Indicator | Audio signal receiving indicators 1-4 CH,Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | Operating Temperature | 0º to+40º | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | Weight | 2.7kg | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | Option | Rack mounting bracket: MB-TS900 | | *0dB=1V |
|
- Base Station for up to 200 Microphone Stations
- Intuitive controls
- Superior audio quality
- Voice activation and NOM limitation
- Standard ins and outs for external equipment
The CS 2 Base Station controls up to 200 Microphone Stations and provides automatic NOM (Number of Open Microphones) attenuation. System gain will decrease by approx. 3 dB every time the number of open microphone doubles. The result is a substantially lower risk of feedback even if the number of open microphones varies constantly.
A selectable Voice Activation function turns the microphones on automatically as soon as they are talked into.
The NOM Limitation function allows the number of simultaneously open microphones to be limited to one, two, three, four, or five. This function can be locally disabled on each Microphone Station so a specific microphone, e.g., one mounted on a lectern, will come on every time, no matter how many mics may be open already. |
Reviews
There are no reviews yet.