JTS PT950B-CM501 Wireless Microphone Set

JTS PT950B-CM501 Wireless Microphone Set

JTS PT-950B

UHF PLL pocket transmitter with lavalier microphone

All instrument microphones of the CX serires as well as headband microphones and lavalier microphones of the CX
series or CM series can be operated via this stable pocket transmitter without interference. The PT-950B is supplied
with the high-quality lavalier microphone CM-501; its frequency response which has been optimised for speech
applications guarantees max. audibility. 193 frequencies with pilot tone technology offer highest flexibility and safe transmission.

The integrated LC display provides reliable information about battery status and transmitting frequency. Continuously adjustable
gain and lock function are indispensable features for professional applications.

Supplied with stable transport box.

Features:

Carrier frequency 790-814MHz   
Audio frequency range 40-18,000Hz   
Frequency stability  ±0.005%   
Transmitting power 10mW   
Connections 4-pole mini XLR   
Power supply  2 x batt. AA size, alkaline   
Operating time > 30h   
Dimensions 70x190x27mm (WxHxD)   
Weight  160g

JTS CM501

Electret lavalier microphone

This microphone is cut out for presentations and discussions. It guarantees good audibility, a secure fit due to the supplied tie clip
and is quickly to install. The cartridge design of cardioid characteristic allows to pick up a precise voice of high quality over a wide dynamic range.

Supplied with windshield.

Features:

System electret/cardioid   
Frequency range 100-15,000Hz   
Impedance  2.2kΩ   
Sensitivity 3.2mV/Pa/1kHz   
Max. SPL 130dB   
Power supply  pocket transmitter
PT series or PS-500   
Connections  cable with 4-pole mini XLR   
Weight  20g

Inspire your audience. Go for XS WIRELESS 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band. The XS WIRELESS 1 LAVALIER MIC SET is an easy to use all-in- one wireless system for presenters and moderators, excellent for a powerful and inspiring presentation. The set includes an intuitive stationary receiver for quick set-up and hassle-free handling, as well as a lightweight bodypack transmitter and an unobtrusive clip-on microphone.

FEATURES

• Compact bodypack transmitter, unobstrusive clip-on microphone
• Antenna-switching diversity reception
• Integrated antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Selectable UHF frequencies within a large bandwidth
• Up to 10 compatible channels
• Microphone condenser 
• THD, total harmonic distortion ≤ 0.9% 
• Pick-up pattern cardioid 
• Signal-to-noise ratio ≥ 103 dBA 
• RF output power 10 mW 
• Switching bandwidth up to 24 MHz 
• Operating time approx. 10 hrs 
• Modulation wideband FM 
• Output voltage '1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu 
• Housing rugged ABS housing 
• Diversity reception antenna switching diversity via internal antennas 
• Frequency 8 frequency banks, each with up to 10 factory-preset channels 
• Sensitivity
• SPL for peak deviation 130 dB 
• Squelch adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) 
• Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) 
• Input sensitivity 1.5 mV / Pa 
• Audio adjustment range 45 dB, adjustable in 5-dB steps 
• Line / Mic level 20 dB, switchable 
• Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C 
• Receiver Principle double superheterodyne 

• Dimensions approx. 200 x 42 x 127 mm 
• Weight approx. 340g 
• Power supply 12 V DC nom. / 300 mA 
• AF frequency response 50 to 16,000 Hz (–3 dB) 

• Dimensions approx. 71 x 96 x 28 mm 
• Weight approx. 95g 
• Power supply 2 AA size batteries, 1.5 V 
• Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps 

• 1 receiver EM-XSW 1
• 1 lavalier microphone ME 2-2
• 1 bodypack transmitter SK-XSW
• 1 power supply NT 12-5 CW
• 2 AA batteries

• DESCRIPTION
  The Wireless GO II Single is an extremely versatile and ultra-compact wireless microphone system consisting of a dual receiver and single transmitter. Features a high-quality microphone built into the transmitter for completely wireless operation, flexible output for connecting to cameras, computers and smartphones, extended transmission range, over 40 hours of on-board recording and much more, Wireless GO II Single is the perfect microphone for a wide range of content creation applications.

  • Ultra-compact wireless microphone system
  • Series IV 2.4GHz digital transmission with 128-bit encryption delivers 200m range (line of sight)
  • 3.5mm TRS analog output, USB-C and iOS compatible digital audio output
  • In-built rechargeable lithium-ion battery – up to 7 hours battery life
  • On-board recording – over 40 hours of internal memory
  • Advanced features accessible via RODE Central including safety channel, flexible gain control (three-stage pad, expandable to 10-stage) and more

  ACOUSTIC & ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS

  • Acoustic Principle: Pre-polarised pressure transducer
  • Polar Pattern: Omnidirectional
  • Frequency Range: 50Hz – 20kHz
  • Maximum SPL (Mic): 100 dB SPL (1kHz @ 1m) dBu
  • Maximum Input Level (3.5mm):  -20dBV
  • Microphone Preamp Gain: 20dB
  • Equivalent Noise Level (A-Weighted): 22dBA
  • Power Requirements: In-built rechargeable lithiumion battery charged via USB 5V, 0.3A
  • Operating Time: Up to 7 hours
  • Analog Inputs: 3.5mm TRS (lavalier microphone input)
  • Analog Outputs: 3.5mm TRS
  • Transmission Range: 200m (line of sight)
  • Computer Connectivity: USB Type-C
  • Operating System Requirements: macOS 10.11 above  / Windows 10 and above
  • Weight (grams): TX: 30g  RX: 32g
  • Dimensions (millimetres):TX Length: 44 x Width: 45.3 x Height: 18.3 / RX Length: 44 x Width: 45.5 x Height: 18.3

  Included Accessories:

  • 2 x Fur Windshields
  • 2 x USB-C Cables
  • 1 x SC5 3.5mm TRS

• Frequency Oscillation Mode PLL UHF Synthesized
• Frequency space 1KHz
• Band width 2MHz
• Frequency Response 50Hz-15KHz
• Working Distance 200 feet
• Frequency stability ±0.005% (-10°C - +50°C)
• Image Interference Ratio >80dB
• S/N ratio >90dB
• Sensitivity -105dB (12dB S/N AD)
• T.H.D

• DESCRIPTION
  The industry standard for productions both large and small – its KE 4 capsule guarantees a brilliant sound that meets high expectations, has a highly durable design and is protected from sweat thanks to our ultra-light patented umbrella diaphragm.

  Specifications:

  • Pick-up pattern: omni-directional
  • Frequency range 20 - 20,000 Hz
  • Sensivity in free field, no load
  • (1 kHz)
  • 5 mV, Pa ± 3.5 dB
  • Nominal impedance 1 kΩ
  • Min. terminating impedance 4.7 kΩ
  • Equivalent noise level:
  • A weighted (DIN IEC 651)
  • CCIR weighted (CCIR 468-1)
  • 28 dB
  • 41 dB
  • Max. sound pressure level 140 dB
  • Plug 3.5 mm jack
  • Cable length 1.6 m
  • Diameter of microphone capsule 4.8 mm
  • Weight 16 g

  What's in the box:

  • 1 x MKE Essential Omni
  • 1 x Foam windscreen
  • 1 x MZQ 02 Microphone clamp

    Designed for Club Sound, House of Worship, Performance & Sports Venues, and other applications.
    ClearScan finds the clearest channel available with the touch of one button
    EZsync infrared channel transfer from the receiver to the transmitter for easy and error-free setup
    14 hour battery life from two AA alkaline batteries
    Rugged metal transmitters with backlit LCD display and battery gauge
    32 preset channels, with compatible groups of 8 channels for simultanious use
    Bodypack with TA4 connector – compatible with all Electro-Voice lapel and headworn microphones for easy upgrades
    Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system
    Metal receiver chassis with optional rack mount ears and front mount antenna cables

Antennas    Flexible TNC 1/2 Wave
Audio Frequency Response    80 Hz - 18kHz +/- 2dB
Balanced Line Level Output (RMS Adjustable)    10 - 100 mV
Battery Life    14 Hours with (2) AA alkalines typical
Case Material    Metal
Connector Type    1/4 inch unbalanced, 3-Pin XLR balanced
Controls    On/Off, Set, Up, Down, Sync
Distortion (@ 1 kHz, 40 kHz deviation)    less than 1.0, 0.4 typical %
Diversity    True Antenna
Dynamic Range    > 95 dB
Dynamic Range    greater than; 95 dB
Element    PL22 Cardioid Dynamic
Element    ULM-18 Uni-directional lapel
Number of Channels    32 Per Band, 8 Simultaneous
Power Supply    12 VDC, 500 mA max
Receiver Type    Synthesized PLL, Agile UHF
RF Frequency Range    16 MHz
RF Output    8 mW Typical
RF Sensitivity (12 dB SINAD)    < 1.0 uV
RF Sensitivity (12 dB SINAD)    Less than 1.0 uV
Signal-to-Noise Ratio (A-weighted)    greater than 100 dB
Signal-to-Noise Ratio (A-weighted)    > 100 dB
Squelch    Tone code plus Amplitude