| Content |
The JBL Commercial CSM-21 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-21 features two stereo music inputs with gain control and clip LEDs, and one stereo output with an active crossover and a dedicated subwoofer output. | Χαρακτηριστικά:Inputs:Gain-Sharing Automatic Mic Mixing Eight XLR Inputs with Level controls & Sig/OL indicators Each can be Mic, Mic with 48V phantom, or Line-level Add up to 64 more gain-sharing inputs by cascading AM2 Automixers Add other audio sources, line inputs and remote controls by connecting to HAL systemOutputs (all mono)XLR Main with Mic/Line switch, Level control & Sig/OL Rane RAD and Cascade IN RJ-45 Ports Cascade In Port connects up to seven additional Rane AM2 mixers, (eight units total) RAD Port may send Output to HAL (DSP/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share | Rane Commercial SM26S Six-Channel Rackmountable Splitter/Mixer
Rane Commercial SM 26S Overview
The Rane SM26S is a unique, dual purpose mixer capable of mixing audio signals and distributing audio via any of the 6 outputs. There are 6 balanced mono inputs and outputs complete with gain and pan control. Pan controls place the channel's signal into the stereo field. As a splitter, the Pan controls assign which output channels distribute incoming signal. There is a separate Left and Right stereo input for incoming signals when using the SM26S as a splitter mixer. Also featured are stereo (Left/Right)"Expand" Output for cascading multiple SM26S. There is no maximum limit as to how many SM26S can be linked.
The Rane SM26S is capable of mixing and distributing signals out of 6 mono outputs. There are 6 mono inputs and 6 mono outputs, 2 sets of stereo (L/R) outputs and a set of stereo (L/R) inputs. Both a mixer and audio distributer, the Rane SM26S is flexible and versatile enough for any sound reinforcement application.
The SM26S features balanced 1/4" TRS phone inputs and outputs for maximum gain and lower noise floor.
PAN pots are featured on channels 1-6 and control stereo placement of audio when the SM26S mono inputs are in use. As a splitter, the PAN control may be used to assign which outputs distribute the incoming stereo signal.
The external power supply is effective in reducing noise created by "dirty" AC power and bad grounds.
| Total # Of Inputs |
8 - Active Balanced 1/4 TRS" Phone Inputs:
Mono channels 1-6
Stereo Input (Left/Right) |
| Output |
8 - Active Balanced TRS 1/4" TRS Phone Outputs:
Mono channels 1-6
Mix Output (Left/Right)
Expand Out:
Stereo Output (Left/Right) |
| Monitor/Headphone Out |
No |
| Impedance |
Inputs: 20 kOhms
Outputs: 200 Ohms |
| Gain |
Overall Gain Range - Off to +12 any input to any output |
| THD & Noise |
0.006 limit = .002% +4dBu, 20-20kHz unity gain |
| Frequency Response |
10Hz - 56kHz +0/-3 dB |
| Metering |
No |
| Controls |
Rotary Pots:
Channel Gain (ch 1-6)
Mix/Pan (ch 1-6)
Master Output
Master Input
Power Switch |
| Phantom Power |
No |
| Power |
18-24VAC w/center tap 300mA Max Current |
| Dimensions |
1.75 x 19 x 5.3" (4.4 x 48.3 x 13.5cm) |
| Weight |
9lbs (4.1kg) |
|
The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs. | L1400 450W-450W 4ohm (280W-280W8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation. |
- Speaker output: 4/8/16 ohm - 70V/100V
- Power output: 4*120W RMS
- 4 MIC/LINE input channels with GAIN, 2-band EQ and VOLUME control
- PHANTOM power on channel 1 and 2
- Channel 1 with PRIORITY switch, auto-mute other input channels
- 4 output channels with 3-band EQ, VOLUME controllers and MUTE switches
- SIREN input priority
- 4 monitor speaker output selectable
- Power supply: AC230V/50Hz or DC24V
- Remote control included
- Dimensions: 480 x 380 x 88 mm
|
Reviews
There are no reviews yet.