Content |
- Head-worn microphone with continuously adjustable behind-the-neck headband
- Moisture shield
- Optimum audio and intelligibility even at high ambient noise levels
- Microphone arm provides choice of left or right-hand use
The new C 555 L head-worn microphone from AKG is rugged, extremely easy to use, and offers outstanding price/performance. The C 555 L is the ideal microphone for any handsfree application including gymnastics instruction, presentations, or onstage performance. The C 555 L rests securely and comfortably on the head, and can be attached to the left or right side of the behind-the-neck headband as desired. A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.
The C 555 L is the only version available and can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
Polar pattern |
cardioid |
Frequency range |
80 Hz to 20 kHz |
Sensitivity |
35 mV/Pa (-29 dBV) |
Max. SPL |
126 dB/130 dB (for 1%/3% THD) |
Equivalent noise level |
22 dB-A |
Signal/noise ratio (A-weighted) |
72 dB |
Impedance |
= 2000 ohms |
Current consumption |
|
|
Transducer Condenser Polar Pattern Omnidirectional Frequency Response 30Hz to 20kHz +/- 3dB Dynamic Range (Typical) Not Specified by Manufacturer Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL Maximum Input Sound Level 130dB SPL Power Requirements Operating Current: 500uA Operating Voltage: 1 to 2V Power Supply Voltage: +3V with 2.7k ohm Load +5V with 6.8k ohm Load +9V with 15k ohm Load Output Impedance 2k ohms Output Connectors TA4-Female Connector for Shure Wireless Transmitters Dimensions Not Specified by Manufacturer Weight 0.07 oz (2g) |
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
Included Accessories
- pop filter,
- clip,
- tool kit,
- anti trauma case,
- mini furry,
- micon cable
Type | Condenser | Pick Up Pattern | Omni-directional | Frequency response | 60Hz - 18kHz | Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz | Ιmpedance | 3000Ω | Dimensions | 140.00mmW x 65.00mmH x 200.00mmD | Weight | 6.50gm | Accessories | pop filter, clip, tool kit, anti trauma case, mini furry, micon cable |
| Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
- Type: condenser
- Directional characteristic: cardioid
- Frequency response: 70–16,000 Hz
- Nominal impedance: 1.4 kOhm
Product type
Wireless Microphone System Accessories
Type
Headsets
Colour
beige
Frequency response
70 - 16.000 Hz
Directivity
Cardioid
Nominal impedance
1400 Ohm(s)
Max. SPL
125 dB
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,2 kg |
ansducer Type
Electret condenser
Polar Pattern
Omnidirectional
Frequency Response
20 to 20,000 Hz
Output Impedance
N / A
Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)
Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
Signal-To-Noise Ratio
60 dB
Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB
Self-Noise (equivalent SPL, A-weighted, typical)
34 dB
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements
+5 V DC (130 μA minimum)
Weight
19.76 g
|
Shure WBH54B Black Headworn Condenser Microphone
WBH54B is a subminiature, electret condenser head worn microphone. It provides uncompromised
sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring.
Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech
and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for
stability and comfort. A plastic carrying case protects the microphone and its accessories.
Features:
Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
Extended frequency response tailored for vocal performances
Able to handle extremely high sound pressure levels (SPL)
Snap-fit foam windscreens stay in place during intensive movement
Available with an in-line preamp or with a TA4F connector for wireless applications
Black finish
TA4F connector for wireless applications
|
Reviews
There are no reviews yet.