Content |
- Class-A amps switcher with Drag Control
- Isolated output eliminates hum and buzz
- 180° polarity sets both amps in phase
- Standard 9 volt power supply operation
The Twin-City is an active ABY switcher that lets you connect to any two guitar amps and drive them simultaneously without noise, loss of gain or any degradation to your natural guitar tone.
The design begins with Radial's award winning class-A buffer for the most natural tone and Drag Control load correction that lets you reintroduce the natural load on the pickup as if connected directly to a tube amplifier. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180⁰ polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum, even when using older vintage amps. As a buffer, the Twin-City lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs.
Like all Radial products, the Twin-City is constructed from heavy 14 gauge steel to protect the internal electronics from abuse when kicked around on a busy stage. For maximum dependability, the Twin-City employs our latest EIS – Electronic Impulse Switching – for unmatched performance without the challenges posed by mechanical switches. Bright, easy to see LEDs provide instant switching status so you know exactly where you are at all times. To better adapt to pedalboards, connections are top mounted for maximum density and powering is done using a standard 9V supply. This makes it easy to combine the Twin-City with other pedals and power them using a power brick .
The Twin-City is a powerful ABY switcher that delivers all of the natural tone, punch and clarity of a true-bypass device without the popping noise of mechanical switches or the induced hum and buzz caused by ground loops.
|
- Experience true analog delay and vintage slap-back echo that rivals any tape delay
- This BEHRINGER product has been designed to compete head to head with leading products on the market
- Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
- Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
- Blue status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- First-class electronic On/Off switch for highest signal integrity in bypass mode
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Analog at its Finest
Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command.
Easy to Operate
The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode. You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included).
Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay... |
Bass chorus like the world has never known.
The DigiTech XBC Bass Multi Chorus Pedal is designed especially for bass. The XBC Bass Chorus Pedal lets you morph up to 16 bass chorus voices at once for an endless palette of amazingly rich effects. Built-in voice randomization increases with more voices for an even denser wash of killer chorus. DigiTech includes a 9V battery with the XBC Bass Multi Chorus Pedal.
DigiTech XBC Bass Multi Chorus Pedal Features:
- Designed especially for bass
- Morph up to 16 bass chorus voices at once
- Voice randomization increases with more voices
| Wah-Wah Pedal HB-01 hell-babe
The HELL-BABE HB01 is unlike any wah you’ve ever stepped on, offering a tremendous array of tone-sculpting options. You get everything from “old-school” wah to the most up-to-date sounds, all in one mesmerizing effects pedal. Add to that optical control that does away with noisy pots, an adjustable spring mechanism and tunable boost, and this babe’s a contender! The HELL-BABE will add new dimension and depth to your artistic expression.
What’s So Great About the HELL-BABE?
First of all, the HB01’s heel-down Range control provides low frequency adjustment that can be swept from 440 Hz down to 250 Hz, making the HB01 the ideal companion for either guitar or bass. For custom-tailoring the toe-down frequency range, the HELL-BABE features a Fine control, allowing you to adjust the frequency sweep as high as 2.2 kHz.
Volume Boost
You can even dial in a powerful volume Boost (up to +15 dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal-like effects.
| Studio Quality Effects at Your Feet
Top recording studios worldwide use Eventide effects on hit after hit. TimeFactor includes Eventide's best delay effects from the past 36 years without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 10 Stereo or Mono Delay effects
- Digital Delay
- Vintage Delay
- Tape Echo
- Mod Delay
- Ducked Delay
- Band Delay
- Filter Pong
- MultiTap
- Reverse
- Looper
- Studio Quality Sound
- Instant Program Change
- Real-time control with 10 knobs, MIDI or expression pedal
- Tap Tempo and MIDI Clock Sync
- 40 User Presets, unlimited through MIDI
- True Analog Bypass
- Rugged cast metal construction
- Metal footswitches for instant Preset access
- Mono or Stereo operation
- Guitar or Line Level Inputs and Outputs
SPECIFICATIONS:
Analog Input/Output |
Input impedance |
500K ohms |
Output Impedance |
470 ohms |
Recommended Load Impedance |
10K ohms or greater |
Connectors |
Input 1 (mono) |
¼ inch mono phone jack |
Input 2 |
¼ inch mono phone jack |
Output 1 (mono) |
¼ inch mono phone jack |
Output 2 |
¼ inch mono phone jack |
Expression Pedal |
¼ inch mono phone jack |
Aux Switch |
¼ inch stereo phone jack |
USB |
Type B Socket. Use 2.0 cables only. |
MIDI In |
Five pin DIN (Female) |
MIDI Out/Thru |
Five pin DIN (Female) |
AC Adapter Jack |
Power Supply included (see below) |
Physical |
Power |
9 VDC, 1200 mA, Tip hot (+) |
Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
Weight |
2.15 lbs, 1kG |
| The BOSS TR-2 Tremolo is designed to provide guitarists with classic tremolo effects in an easy-to-use compact pedal. Dedicated "Wave," "Rate," and "Depth" knobs provide a multitude of effect possibilities.
- Provides guitarists with high-quality vintage tremolo effects in an easy-to-use compact pedal
- Dedicated "Wave," "Rate" and "Depth" knobs allow for precise effect tailoring
- “Rate" control allows for higher speed adjustment than classic PN-2
- “Wave" control alters LFO waveform from triangle to square
- “Depth" control determines the strength of the effect
- BOSS 5-year warranty
|
Reviews
There are no reviews yet.