| Content |
The RPM 26z is a 100% drag and drop configurable DSP-based device, set up and controlled using Rane's Drag Net software. Industry standard 10Base-T Ethernet is used to communicate between Drag Net devices and any Ethernet-equipped PC running Microsoft Windows.
Drag Net offers the ultimate in signal processing flexibility, allowing you to draw the system you need without signal flow restrictions. Familiar Windows file management tools and Shortcuts are incorporated into Drag Net, allowing complete project management within a single Interface.
The RPM 26z provides two Balanced, Line-Level analog inputs and six Balanced analog outputs. A two channel AES3 Digital input is also provided making the RPM 26z a true 4-input, 6-output device. All I/O, including the AES3 input, has its own 100% user-defined signal processing path.
Cost-effective end user control is possible using optional Rane accessories in conjunction with the Versatile Input Port. Whether your application requires contact closure Preset recall or remote level control using a potentiometer on a wall, the RPM 26z keeps the user Interface easy and inexpensive.
Euroblock connectors are provided for Audio and logic I/O. Grounding screws for direct connection to the metal chassis are provided for solving EMI problems due to shield wiring. Also found on the rear panel is a standard XLR-type connector for the AES3 input, an RJ-45 Ethernet connector for computer control, and an IEC AC power input.
All DSP algorithms are not created equally and textbook DSP algorithms miss the mark where the rubber meets the road. Rane's team of audio-savvy DSP mathematicians -- a rare breed itself -- in conjunction with our industry-leading analog signal processing gurus have combined forces to offer superlative Digital and analog Audio performance. With 24-bit converters, greater than 104 dB throughput Dynamic Range and double-precision 48-bit internal DSP 'math,' the RPM 26z offers the best DSP algorithms and Audio performance available.
This ain't no Internet appliance! For example, the RPM 26z's 215 MIPs translate into 150 fully Parametric EQ filters, should you need multiple channels of 15 band parametrics and nothing else.
Multiple units are controlled from a single computer using low-cost Ethernet switches. The recessed Default button on the rear panel recalls Preset 1 in case of communications failure. The front panel has three-color LED meters for each input and output, allowing fast and intuitive signal flow verification without a computer. Current Preset, Control Port, Power, Ethernet and Status indicators are also on the front panel. Powered from an internal power supply and certified as UL, CSA and CE complient, the RPM 26z is compatible with any installation mandating agency compliance.
| The dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, crisp vocals without sibilance!
With its modular 500 Series based design, the dbx 520 examines the differences in dB between the high frequency and full-bandwidth portions of a signal, allowing de-essing of signals which change in level by as much as 60dB. It features a Frequency Control with range from 800Hz to 8kHz, Gain Reduction Metering and a De-essing Amount Range from 0dB to 20dB.
Control vocals, drums, percussive instruments and problematic material/reverb combinations with the dbx 520! |
INPUT: 4 balanced +4dBu/50kΩ on female XLR connectors; 4 unbalanced 1Vpp/50kΩ on RCA connectors.
OUTPUT: 4 unbalanced 1Vpp/49Ω on RCA connectors; 4 balanced +4dBu/49Ω on male XLR connectors.
MAX. OUTPUT: 18Vpp.
BANDWIDTH (-3dB): 30kHz.
S/N RATIO: Better than 89dB.
THD: Less than 0.02%.
POWER SOURCE: 115-230V AC, 50/60Hz, 3.7VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.4kg (5.3lbs) approx.
ACCESSORIES: Power cord. |
Wireless 5.8 GHz Stereo Receiver
- For wireless transmission of a stereo audio signal together with the
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
- Volume control
- Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
|
Wireless 5.8 GHz Stereo Transmitter
- For wireless transmission of a stereo audio signal
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Inputs: 2x XLR female or 2x 6.3 mm jack (unbalanced)
- Switch for mono/stereo operation
- Volume control
- Dimensions without antenna (L x W x H): 115 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
| WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
Reviews
There are no reviews yet.