| Content | Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedures are focused on one simple goal; extracting as much music from your vinyl as possible.
Each one uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
The multi award winning Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.
A hand built, moving magnet cartridge in our custom designed body.
- Output: 6.8 - 7.2mV
- Stylus: Elliptical
- Fixing: Standard, two screws
- Coils: High spec parallel wound coils
- Colour: Red
- Tracking Pressure 1.75g
| EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT
* Adjustable cartridge which will fit in a traditional headshell mount
* Replaceable diamond tip |
Type: Moving coil (MC)
Frequency response: 15 to 50,000 Hz
Output voltage: 0.4mV (1 kHz, 5 cm/sec.)
Channel separation: 30 dB (1 kHz)
Channel balance: 0.5 dB (1 kHz)
Tracking force: 1.8 to 2.2 g (standard: 2.0 g)
Coil impedance: 12O(1kHz)
DC resistance: 12 O
Recommended load impedance: Min. 100 O (when head amplifier is connected)
Coil inductance: 25µH (1 kHz)
Static compliance: 35 x 10 - 6 cm/dyne
Dynamic compliance: 18 x 10 - 6 cm/dyne (100 Hz)
Stylus: Line contact stylus (curvature radius: 40 x 7µm)
Cantilever: 0.26 mm diameter solid boron
Vertical tracking angle: 23 degrees
Dimensions: 17.3(H) x 16.8(W) x 25.7(L) mm
Weight: 8.0 g
| For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
| Output voltage at 1000Hz, 5cm/sec. |
7 mV |
| Channel balance at 1kHz |
1,5 dB |
| Channel separation at 1kHz |
25 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at -3dB |
20-20.000 Hz |
| Frequency response |
20-15.000 Hz 3dB/-2dB |
| Tracking ability at 315 Hz at recommmende tracking force |
80 μm |
| Compliance, dynamic lateral |
6 μm/m N |
| Stylus type |
Spherical |
| Stylus tip radius |
R 18 μm |
| Tracking force range |
3,0-5,0 g (30-50 mN) |
| Tracking force recommended |
4,0 g (40 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
750 Ohm |
| Internal inductance |
450 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
200-600 pF |
| Cartridge weight |
5 g |
| Replacement stylus unit |
scratch |
|
The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear.
Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever. Accurately traces the grooves of your records for smooth sound throughout the frequency range.
Universal mount
Biradial diamond tip
Tubular aluminum alloy stylus cantilever
Standard mount adapter
Mounting hardware
Stylus guard
Low Tracking Force
Minimizes wear on your irreplaceable vinyl collection
Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.
- Type: MM
- Fixing: P-mount
- Output voltage: 5,0mV bei 1kHz, 5cm/sec.
- Amplifier-connection: Phono MM
- Frequency range: 20-18.000Hz
- Material: diamond, bonded
- Stylus type: elliptical 0.4 x 0.7 mil
- Tracking force range: 0,75-1,5g
- Tracking force, recommended: 1,25g
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-300pF
- Weight: 7,3g*
| The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 24 dB |
| Channel separation at 15 kHz |
>15 dB |
| Frequency range at - 3dB |
20-30.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
|
Reviews
There are no reviews yet.