Content | The OM-GT needle for headshell mounting is especially appropriate for Hip Hop / turntablism and offers great sound characteristics and sophisticated scratching capabilities.
Features
- OM version (headshell)
- Excellent sound characteristics
- Appropriate for scratching
- Very high output level
Technical Data
- Frequency range: 20 Hz - 20 kHz
- Output voltage (5 cm/s): 8 mV
- Tracking force range: 3 - 5 g
- Recommended tracking force: 4 g
| For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
Output voltage at 1000Hz, 5cm/sec. |
7 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
25 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at -3dB |
20-20.000 Hz |
Frequency response |
20-15.000 Hz 3dB/-2dB |
Tracking ability at 315 Hz at recommmende tracking force |
80 μm |
Compliance, dynamic lateral |
6 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
3,0-5,0 g (30-50 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
750 Ohm |
Internal inductance |
450 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge weight |
5 g |
Replacement stylus unit |
scratch |
|
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
|
Type: Moving Coil, Mono 78 RPM Mono cartridge
Frequency response: 45 -7,000 Hz
Output voltage: 1.2 mV (1kHz and 5 cm/sec)
Tracking force: 3.0 - 7.0 g (5.0 g standard)
Recommended load: 40 ohms - 47K ohms (determine best value by listening)
Channel separation: Not applicable
Channel balance: Not applicable
Cantilever: Aluminum alloy
Stylus: Highly polished special conical 2.5 mil diamond
Dynamic compliance: 7.0 x 10-6 cm/dyne
Static compliance: 20.0 x 10-6 cm/dyne
External size: H16.0 x W16.6 x L26.5 mm
Weight: 6.8 g
Accessories included: Screwdriver, 4 screws, 2 washers and 2 nuts, spacer/weight, stylus brush
|
Type: Moving Coil
Frequency Response: 20 to 20,000 Hz
Coil Impedance: 40 W (1 kHz)
DC Resistance: 40 W
Vertical Tracking Angle: 23 degrees
Recommended Load Impedance: 400 W to 47,000 W
Coil Inductance: 190 mH (1 kHz)
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
Output Voltage: 1.2 mV (at 1 kHz, 5.0 cm/sec)
Stylus Shape: Conical
Cantilever: Aluminium Pipe
Stylus Construction: 0.6 mil
Mount: 1/2” centers
Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm
Weight: 6.8 g
Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101
| Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec. |
11 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
22 dB |
Channel separation at 15 kHz |
- |
Frequency range at -3dB |
20-18.000 Hz |
Frequency response |
20-18.000 Hz - 3 dB |
Tracking ability at 315 Hz at recommmende tracking force |
90 μm |
Compliance, dynamic lateral |
12 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
3,0 g (30 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
1.680 Ohm |
Internal inductance |
920 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-400 pF |
Cartridge weight |
5 g |
Replacement stylus unit |
Q.Bert |
|
Reviews
There are no reviews yet.