| Content | RODE NT G8 Broadcast Quality RF-bias Shotgun Microphone
Based on RØDE's award winning NTG3, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.
Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.
The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.
Acoustic Principle Line Gradient
Active Electronics RF Bias
Capsule 0.50“
Polar Pattern Hyper Cardioid
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 2Ω
Maximum SPL 124dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 8.2dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
(44-52V min 2.5mA)
Weight 345.00gm
Dimensions 559.00mmH x 19.00mmW x 19.00mmD
Output XLR |
ProMic Laser is our first ever DSLR on-camera microphone - a shotgun condenser microphone with a precision-tuned capsule for capturing professional-quality audio direct to camera.
With more and more video recording enthusiasts taking an increased interest in the quality of the audio of their videos, ProMic Laser provides the high-quality audio to match the high-definition video capabilities of todayʼs DSLR cameras.
Laser, the first release in the ProMic series, is a truly professional solution. It has a rugged aluminium design and comes with a removable wind shield and a custom shockmount for hot-shoe mounting directly onto a DSLR camera.
Laser is battery-powered using a single AAA battery (not included), which means that the microphone has an increased sensitivity level, and a lower noise floor, but the inclusion of a -10dB Pad allows you to reduce the level of the mic for recording louder sources.
The microphone also features a Bass Cut, which gives you the option of removing unwanted low frequency rumble, such as traffic or noise from the camera itself, and this can be used in tandem with the -10dB Pad.
As with all sE Electronics products, ProMic Laser comes with a three-year free replacement warranty, which means if it lets you down, weʼll simply give you a new one.
ProMic Laser comes with a protective carry bag and a 3.5mm coiled jack-to-jack cable to connect the microphone to your camera. Laser is compatible with the upcoming ProMic accessories series, which includes boom poles and fur windshields. |
he PRO24-CMF camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with a windjammer, accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO24-CM is rugged; it's built to endure the rigors of field production. - Stereo microphone designed to attach to a camcorder
- For camcorders with an accessory shoe and stereo microphone input
- Lightweight, portable design with rugged all-metal construction
- Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image
- Battery-free operation when used with recording devices that provide plug-in power at the mic input
- On/off switch for convenient operation
- Includes camera-mount, windscreen, windjammer, battery and protective pouch
- Permanently attached 6""-12“" coiled cable with right-angle molded 3.5 mm stereo mini plug at output end
Polar Pattern: X/Y Stereo
Frequency Response: 100-17,000 Hz
Open Circuit Sensitivity: -50 dB (3.1 mV) re 1V at 1 Pa
Impedance: 600 ohms
Maximum Input Sound Level: 119 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 82 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 57 dB, 1 kHz at 1 Pa
Battery Type: 1.5V LR44
Battery Current Life: 0.6 mA / 200 hours typical
Switch: On/off
Weight: 3.9 oz (111 g)
Dimensions: 4.59“" (116.5 mm) long, 0.83" (21.0 mm) maximum body diameter
Output Connector: 3.5 mm stereo mini plug on cable
Cable: Permanently attached 152.4 mm - 304.8 mm (6""-12"") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
Accessories: Video-camera shoe mount; LR44 battery; windscreen; Fur windjammer AT8123 and soft protective pouch
|
The MD 42 is a high-quality reporter's microphone with omni-directional pick-up pattern. It has been specially optimised for rough use in live reporting and broadcasting environments. The MD 42 is a very 'good-natured' microphone whose design avoids wind and handling noise problems. Colour: black, sound inlet basket: refined steel, black.
Features
Two-ply sound inlet basket provides increased protection from wind and pop noise
Rugged metal housing
Rubber mounted capsule (or Elastically mounted capsule) ensures low sensitivity to handling noise
Omni-directional pick-up pattern ensures excellent speech intelligibility without having to point the microphone directly at your interview partner
Pick Up Pattern omni-directional
Frequency response 40 - 18 000 Hz
Sensitivity 2,0 mV/Pa
Ιmpedance 1000 Ohm
Dimensions Ø 49 x 250 mm
Weight 360 gr
| Broadcast sound quality
Low noise circuitry
Internal rechargeable lithium battery, supplying over 150 hours operation
Fully charged in under two hours via MicroUSB
Rugged metal construction
Convenient digital switching
High Frequency Boost
High Pass Filter (Flat/75Hz)
PAD (-10db)
MicroUSB cable included
Ten year extended warranty with online registration
Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.
The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
Visit the NTG4+ feature page
NTG4+ Specifications
Acoustic Principle Line Gradient
Capsule 0.50“
Polar Pattern Supercardioid
Address Type End
Frequency Range 20Hz - 20kHz(selected HPF @75Hz)
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 16dB-A
Power Options +12V phantom power+24V phantom power+48V phantom powerInternal battery
Weight 176gm
Dimensions 278mmH x 22mmW x 22mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration |
Broadcast sound quality
Low noise circuitry
Rugged metal construction
Convenient digital switching
High Frequency Boost
High Pass Filter (Flat/75Hz)
PAD (-10db)
Ten year extended warranty with online registration
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.
Visit the NTG4 feature page
NTG4 Specifications
Acoustic Principle Line Gradient
Capsule 0.50“
Polar Pattern Supercardioid
Address Type End
Frequency Range 20Hz - 20kHz(selected HPF @75Hz)
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 16dB-A
Power Options +12V phantom power+24V phantom power+48V phantom power
Weight 126gm
Dimensions 225mmH x 22mmW x 22mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration
|
Reviews
There are no reviews yet.