ADJ Saber Spot WW LED Pinspot 15W Warm White

The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.

The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.

Optical
• Light Source: 15-Watt Warm White LED
• LED Life Expectancy: 10,000 Hrs
• Beam Angle: 4-degrees
• Includes 2 interchangeable frost filter lens (10-degree & 45-degree)
• Refresh Rate: 3.6KHz

Technical Features
• 4-button Digital Display for easy navigation
• Electronic Dimming 0 – 100%
• Flicker Free
• Includes a scissor yoke to be hung or set on the ground

Connections
• Power Input: powerCON
• Power Pass through: powerCON
• Control: 3 Pin DMX In/Out pigtails
• With Wired Digital Communication Network

Control
• 2 DMX Channel Modes: 1 or 2 

Electrical
• Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)
• Power draw 120V 60Hz: 15W, 0.13 Amps
• Power draw 220V 50Hz: 15W, 0.07 Amps 

Physical 
• Dimensions (LxWxH): 3.5” x 6.75” x 3.5” / 88 x 170 x 87mm
• Weight: 2.6 lbs / 1.2 kg.
• Metal Black Housing 

Certifications
• ETL Approved, UL, CE
• IP 20: Dry area, No liquids

What’s Included
• Manual
• powerCON power cord
• 2 frost filter lens (10-degree & 45-degree)
• O-ring for frost filter lens

Optional Accessories
• PLC 3,PLC 6, PLC 10 (powerCON passthrough cables)

LED lighting effects Butterfly, RGBW, with 2x10W common transmitter (4 in 1) Cree Led's. Unlimited combinations of colors. Features Electronic Dimmer, Strobe, works with DMX 512 (8 or 5 channels) or independently with music or Auto or Master / Slave. Index IP20 sealing interior. Exterior finish black. Power consumption: 30W, power supply: 110V -240V, 50-60Hz. Dimensions: 27x28x20cm. Weight: 3kg. Uses: disco, club, bar and party.

Ultra-high performance LED PAR 56 with 9 extremely bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 50 Watts. Like all new LED PAR cans, the CLP 56 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.

It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.

• 9 ultra-bright 3-Watt TRI colour LEDs
• Beam angle of 25 degrees
• Low power consumption of just 50 Watts
• Operated via DMX (6 channels), in master/slave mode or standalone mode
• Simple to operate using the four buttons and LED display
• Double bracket included as standard
• Cooling method: Heat sink 
• Sturdy aluminium housing

• Product: LED Par Can
• Type: PAR56
• Colour Range: RGB
• Number of LEDs: 9
• LED Type: 3 W TRI Colour
  
• Beam Angle: 25°
• DMX Input: XLR 3-pole
• DMX Output: XLR 3-pole
• DMX Mode: 6-channel
• DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
• Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
• Controls: Mode, Value Up, Enter, Value Down
• Indicators: LED Display
• Power Supply: 100 V AC - 250 V AC
   
• Power Consumption: 50 W
• Power Connector: Schuko
• Housing Material: Aluminium
  
• Housing Colour: Black
  
• Dimensions without mounting bracket): 230 x 250 x 260 mm

•Voltage: AC100V~240V, 50~60HZ
• Power Consumption: 73W
• LED Quantity: 6x Cool white, 12x Warm white
• Beam Angle: 25°
• IP Grade: IP20
• DMX channels: 5
• Packaging Size: 300*300*380 mm
• Net weight: 3,1Kg
• Gross weight: 4,53Kg
Features
• 3PIN plug DMX in and out
• IEC power plug in and out
• Die-cast aluminium housing
• LED display for easy setup
• Working indoor temperature -20°C~+40°C
• Strobe/Colour temperature selection

Featuring 7 high performance 10 watt LEDs, 30° beam angle and 3,000 Hz refresh rate, the Cameo CLPFLATPRO7 professional PAR light allows for stunning RGBWA colour mixing. The super slim design is totally noise free thanks to its convection cooling construction and thus perfect wherever space is limited and quiet operation is a must.

With 5 DMX modes, numerous functions, integrated programs and a built-in microphone for sound control the CLPFLATPRO7 produces a huge range of colours from soft pastel hues to rich, warm tints. It incorporates an illuminated LC display with 4 controls for easy manual operation and provides master, slave and standalone capability.

The black die-cast enclosure includes both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. The Cameo CLPFLATPRO7's multifunctional bracket design offers a wide variety of mounting options.

• Colour Range: RGBWA
• Number of LEDs: 7
• LED Type: 10 W
• Beam Angle: 30°
• DMX Input: XLR 3-pole, XLR 5-pole
• DMX Output: XLR 3-pole, XLR 5-pole
• DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
• DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
• Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
• Controls: Mode, Value Down, Value Up, Enter
• Indicators: illuminated LC-Display
• Operating voltage: 110 - 240 V AC, 50 / 60 Hz
• Power consumption: 100 W
• Power Connector: Neutrik PowerCon in/out
• Housing Material: Metal
• Housing Colour: Black
• Type of cooling: Convection
• Illuminance (lx 1m): 12000 lx
• Dimensions (without mounting bracket): 180 x 180 x 133 mm