| Content |
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features :
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for
extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated
die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).
Optional DPCN (CobraNet?) digital audio input
module available.
Specifications:
|
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
|
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
|
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
|
Directivity Factor (Q) |
: |
15.85 |
|
Directivity Index (DI) |
: |
12 dB |
|
Maximum Peak Output1 |
: |
138 dB SPL 1m |
|
Transducer Section |
|
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
|
Bandpass
Nominal Impedance |
: |
4 ohms |
|
Mid/High
Frequency Section |
: |
|
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer |
|
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
|
Waveguide |
: |
JBL PT-K64-MHF |
|
Bandpass
Nominal Impedance |
: |
8 ohms
|
|
System |
|
|
|
DP2 Internal
Amplification Output
(at nominal load) |
: |
2200 Watts Peak,
1100 Watts Continuous |
|
DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance) |
: |
750LF/350HF Watts |
|
DP2 Output Section |
: |
2-Channel, Class I |
|
Audio Input connector: |
: |
XLR with loop-through |
|
Network
Control Connector |
: |
Ethernet, RJ45 |
|
Signal Processing |
: |
DSP Based, resident in
Input Module |
|
System Management
|
: |
DSP based limiters for mechanical
and thermal protection |
|
AC Power
Operating Range |
: |
Auto Select 90-132VAC/
216-264VAC, 50/60Hz
|
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%) |
|
AC Input Connector |
: |
Neutrik PowerCon |
|
AC Loop-Thru |
: |
Neutrik PowerCon |
|
AC Current Requirement |
: |
6A per system at 120V, 3A per
system at 240V |
|
Enclosure |
|
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.
|
|
Suspension System |
: |
6 standard air-cargo 3 in. track
and 12 M10 fittings
|
|
Grille |
: |
14 Gauge Black powder-coated
perforated steel with foam backing
|
|
Dimensions
(H x W x D) |
: |
914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in) |
|
Net Weight |
: |
44 kg (97 lb) | |
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
|
|
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 ACTIVE | | GENERAL INFO |
| | System type | Active 15" 2-way Bi-Amplified | | Frequency response +/- 3db | 50-20kHz | | HF SECTION |
| | Hf type | Titanium Compression Driver | | Horn dispersion (H x V) | 90° x 60° | | Hf exit size mm / inches | 25mm / 1“ | | PHYSICAL FEATURES |
| | Enclosure Material | Injection Moulded Polypropylene | | Enclosure Colour | Grey or White or Black | | Size (mm/inches) | 381mm / 15“ | | IN / OUT PANEL (speaker Level) |
| | Input connector | XLR - 1/ 4" Combo jack | | AMPLIFIER POWER |
| | Power On Protection | Power switch on / off mute | | Thermal Protection | Amplifier shutdown, auto reset | | Low Line Voltage Shut Down | 60% Nominal line voltage | | Driver Protection | Independent LF and HF limiters | | DC Protection | Yes | | Short Protection | Yes | | Controls | High (±10dB) 10kHz Shelving | | Dimensions (HxWxD) |
| | mm | 708.3mm x 477.8mm x 401.77mm | | inches | 27.9" x 18.8" x 15.8“ | | Microphone / Transmitter |
| | Maximum Input Level | +22dBu | | Impedance | 4 Ω | | MIXER MODEL |
| | INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | | Clip Limiter | Turns on approx 350W output | | Limiter Indicator | Red LED | | Power Indicator | Red LED | | AC Power details |
| | Power Supply | High Efficiency Switching Mode Power Supply | | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | | Power On Indicator | LED | | Rigging / Bracket / | 10 M8 threaded inserts including 4 | | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | | Line Output |
| | Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | | Input A - type | Switchable balanced mic or line level input | | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | | Maximum Input Level | +22dBu | | Input Connector | XLR - 1/ 4" Combo jack | | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | | Input B - type | Line level input | | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | | Maximum Input Level | +22dBu | | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | | Bass Response Optimizer |
| | (“BRO“™) circuit | +5dB at 60Hz | | Subsonic Filter | 30Hz, Second-order filter | | Amplifiers |
| | Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | | Electronic Crossover | 24dB/octave Linkwitz-Riley | | Crossover Frequency | 1.8kHz | | Controls | High (±10dB) 10kHz Shelving | | Equalization | Low (±10dB) 100Hz Shelving | | DIMENSIONS & WEIGHT |
| | Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
| 2-Way Active Bi-amplified Speaker. Simplicity is the core of the project for this loudspeaker enclosure with its unique and innovative design. Flexible, rapid and safe assembling in fixed and mobile installations thanks to the 6 fly points included in the cabinet shape and to the very low weight. Ideal for use as main system for music performances, theatre, P.A, or as a stage monitor, W17As is an exceptionally accurate, highly versatile system, providing a rich and broad range of sound experiences in the most diverse situations.
- High sound pressure levels without distortion.
- Precise and detailed acoustic image.
- 130 dB max SPL.
- 2, class AB, Mosfet amplifiers delivering a total output power of 600 Watts (LF 450 W, HF 150 W).
- 2 indipendent dedicated dynamic processors.
- Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).
- 15" high efficiency woofer, with lightweight neodymium magnet assembly and 3" voice coil.
- 1,4" compression driver with 2.5" voice coil and titanium diaphragm.
- 60° x 40° constant directivity horn.
- Robust, lightweight and compact cabinet, made from HD polyethylene by rotational molding and equipped with two side handles for easy carry and set-up and with a stand adapter.
- Unique and innovative design which includes 6 sturdy fly points (patented) completely integrated in the cabinet and designed to hang or angle the speaker in the air as required, using any type of hook available on the market.
- The cabinet\'s shape allows for both vertical and horizontal installation (for use as stage monitor).
- Ergonomically designed side handles for easy transportation and set-up.
APPLICATIONS
- Voice reinforcement system.
- Stage monitor.
- Theatrical sound reinforcement.
- Night clubs.
- Ballrooms.
- Conference centers, presentations.
- Houses of worship.
- Small to medium/large-sized main sound reinforcement systems.
- Fill-in and side-fills in larger PA systems. |
Product Features: - High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
- “Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
- 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
- Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning:
- - Stand mounting with 35 mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
User's Manual
|
Reviews
There are no reviews yet.