Content |
USED IN GOOD CONDITION.
Price does not include vat
The S com plus is a highly adaptable stereo compressor/limiter in an efficient single rackspace design. It is intended for situations where extra flexibility is required to optimize signal levels. It delivers essential control along with simplicity of operation. S com plus's comprehensive and wide-ranging controls provide extensive manipulation of audio dynamics, even in the most complex situations. Each channel features a wide range of variable control. A feature-rich Compressor section includes variable Threshold, Ratio, Attack and Release controls. Samson's SKD (Smart Knee Detector) circuit dynamically adjusts the compression curve to ensure a musical result. Our exclusive AEG (Auto Envelope Generator) function simplifies optimum settings by constantly analyzing the audio input and automatically adjusting the attack and release parameters based on the changing level. Key Inputs and Outputs are included for externally processing the control voltage. The Expander/Gate features a variable threshold level and switchable release time (fast or slow). The Gate switch changes the downward expander ratio from "light" to "hard" gating for control ranging from subtle to an obvious effect. A dedicated Peak/Limiter with variable control provides protection against peak and overload independently of the compressor. When used in combination with the Compressor the Peak/Limiter offers even more precise control over dynamic levels. A functional De-esser improves audio quality by removing "S" from vocals and sibilance from overly bright signal sources such as cymbals. The Enhancer switch engages the EFR (Enhanced Frequency Recovery) circuit, which restores high frequencies that are sometimes diminished by heavy compression. Extensive metering includes Input/Output, Gain Reduction, De-esser Level, Gate Open/Close and Limit. Other S com plus features FEATURES:
Compressor/Limiter, Expander/Gate, De-Esser with Peak Limiter Expander/Gate with Variable Trigger Control and Switchable Fast/Slow Release Peak Limiter with Independent Threshold Control and Peak LED Adjustable De-Esser with independent LED Meter for Reducing Sibilance Advanced Circuit Design Utilizing Low Noise Operational Amplifiers and High Quality VCA's Servo Balanced Inputs and Outputs on XLR and 1/4" Connectors SKD (Smart Knee Detector) Circuit Switches from Soft to Hard Knee Based on the Level of Input Signal Applied AEG (Auto Envelope Generator) Mode Constantly Adjusts the Compressors Attack and Release Times Three-year Extended Warranty |
Features | • Dual 15-band equalizer | | • Constant Q | | • Low cut filter at 50Hz with a 12dB/Octave slope | | • Balanced XLR inputs and outputs | - | • Bal 1/4" inputs and impedance balanced 1/4" outputs | - | • ISO 2/3 octave frequency centers |
PRICE DOES NOT INCLUDE VAT
Longer throw faders provide more precise adjustments when equalizing a room. The SR830QXLR offers 2 channels of equalization each with 15 bands of 45mm faders. The all steel chassis construction can handle the abuse of the road, or the solace of a permanent installation.
|
PRICE WITHOUT V.A.T.
The BSS FDS-334T is a 2 input / 4 output loudspeaker management system with
Features such as : Fast-access edit input and output, Each output is assignable
to either input or to sum of inputs, Navipad menu navigation, Bright blue text display,
Crossover, assignable PEQ mid-filter limiters, polarity and delay on each output,
Assignable parametric EQ and delay on each input, LED bargraphs on every input
and output, 6, 12, 18, 24 or 48dB per octave Butterworth, Bessel or Linkwitz crossover
alignments, 60 user programs, Lockable front panel mutes and level trims and MIDI control.
|
PRICE DOES NOT INCLUDE VAT
Gepco Passive D.I. Box-2nd Hand-
|
PRICE DOES NOT INCLUDE VAT
Peavey EQ-215 Stereo Vintage (Used)
- 15 frequency bands stereo equalizer
- External condition: mediocre (scratches,one fader knob missing)
- Works perfectly
- Made in U.S.A.
- Price does not include V.A.T.
| PRICE DOES NOT INCLUDE VAT
Features
Advanced Hardware for Superior Sound
The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible.
Stereo Configuration with Balanced Inputs and Outputs
A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors.
Preset, Internal, and Card Memory
180 memory locations "on board“. 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each.
Three-stage Effect Configuration
In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound.
In-depth Programming Power
The SPX990 has 4 programmable pre effects, 36 programmable main effects, and 3 programmable post effects.
Tempo-based Delay Time Programming
Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data.
Superior Pitch Precision
The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990's "intelligent" pitch change creates appropriate harmony based on a specified key and scale type.
External Parameter Control
The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers.
MIDI Control
The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time.
4 Pre-Effects
1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT
36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation
REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT
Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze
PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN - 1 OUT
3 Post Effects
1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN - 2 OUT
Specifications
Frequency Response |
20 Hz - 20kHz +/-0.5 dB |
CD Player
Dynamic Range |
Above 100 dB (typical 106dB) |
Specifications
Hum and Noise |
Below -82 dBm (Typical -88dBm) |
Distortion |
Below 0.005% at max. level 1 kHz |
Input/ Number of Channel |
2 (Phone Jack) |
Input/ Nominal Level |
+4/-20dBm (Switchable) |
Input/ Highest Input |
+24dBm (Switchable at +4dB) |
Input/ Impedance |
20 k ohm |
Output/ Number of Channel |
2 (Phone Jack) |
Output/ Nominal Level |
+4/-20dBm (Switchable) |
Output/ Highest Output |
+18dBm (Switchable at +4dB) |
Output/ Impedance |
150 ohm |
A/D Conversion |
20 bits |
D/A Conversion |
20 bits |
Sampling Freq. |
44.1kHz |
Preset Program |
1 - 80 |
User Memory Program |
1 - 99,00 |
Optional Memory Card |
1 - 99,00 |
Front Panel/ Control |
Input Level (L,R), Data Entry |
Front Panel/ Keys |
Function Key x 6, Page Select Key x 2, Memory, Store, Edit, Bypass |
Front Panel/ Display |
2 ch. 8 segment LED (Level Meter) 6 segment LED (Mode Indicator) 7 segment LED (Memory No.) Memory, Edit, Bypass indicators 24 chara x 2 Line LCD |
Front Panel/ Slot |
Memory Card |
Rear Panel/ Connectors |
Input L/R (XLR x 2, Phone jack x 2 Output L/R (XLR x 2, Phone jack x 2) MIDI In, Thru/Out (DIN 5P x 2) Trigger (Phone Jack x 1) Bypass or INC/DEC (Phone Jack x 1) |
Rear Panel/ Switch |
In/Out Level Switch (+4dB/ -20dB x 2) MIDI Thru/ Out Switch |
Power Requirements |
US and Canadian Models: 120V, 60Hz British Model:240V, 50Hz General Model:230V, 50Hz |
Power Consumption |
25W |
Dimensions |
480 x 46 x 324.4 mm |
(W x H x D) |
(18-7/8" x 1-13/16" x 12-3/4“) (including attachments) |
Weight |
4.6 kg (10lbs. 2oz) |
|
Reviews
There are no reviews yet.