SAMSON CL7 STUDIO CONDENSER LARGE DIAPHRAGM STUDIO MICROPHONE

Introducing another musically empowering Samson condenser mic. Never before
has a studio mic this good been available at this price. Like the finest studio mics
costing hundreds, even thousands of dollars, the CL7 has a true capacitor condenser
mic element. Capacitor-based elements are warmer, brighter and bigger sounding
than electret-based elements.

APPLICATION:
The CL7 features a large, 1.1-inch, ultra thin diaphragm capsule which faithfully
reproduces a variety of sound sources including vocals, acoustic instruments
and overhead cymbals, to name just a few.

TECHNICAL SPECIFICATIONS:
Frequency Response  20 ~ 20000 HZ 
Polar pattern  Cardioid 
Element type  Condenser 
Diaphragm thickness  3 microns 
Sensitivity  -40 dB/Pa 
Max SPL  147 dB 
Equivalent Noise Level  17dB 
Impedance  200 ohms 
Mininum Load Impedance  1000 ohms 
Power supply voltage  phantom power 48V +/-3V 
Weight  1.1 lbs. (500 g) 
Dimensions 
Height: 7" (175 mm) Width: 2.125" (54 mm) Depth: 2.125" (54 mm) 

FEATURES:
Large Diaphragm Studio Condenser
1.1" Capsule with 3-micron Gold Sputtered Diaphragm
Switchable Hi-pass Filter, 12dB per octave at 100 Hz
Smooth and transparent sound reproduction
Cardioid pick-up pattern
36-52 Volt Phantom Power operation (Requires 48V Phantom Power)
Internal Shock-mount
Extended frequency response
Solid Die Cast construction
Swivel Stand Mount and Carry Case included 

Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone

The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.

Manual Download

• Large 1" (25mm) capsule with gold plated diaphragm
• Cardioid polar pattern
• Self noise of only 5dB (A)
• Ultra low noise, transformerless surface mount circuitry
• Wide dynamic range
• Gold plated output contacts
• True condenser (externally biased)
• Internal capsule shock mounting

NT2-A - ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
 
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
 
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range:  20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm

• Polar pattern: Cardioid
• Switchable -10dB PAD
• Frequency response: 20 - 20,000 Hz
• Max. SPL: 140/150 dB (THD = 0.5%)
• Electrical impedance: 200 Ohm
• Requires phantom power
• Diameter: 53 mm
• Length: 162 mm
• Net weight: 320 g
• Colour: Black
• Incl. shock mount

• Highly affordable AKG large-diaphragm microphone technology
• Cardioid polar pattern for multiplicity of vocal and instrument applications

• Back-to-back large-diaphragm multi-pattern transducer
• True condenser technology
• High sensitivity and 155 dB maximum SPL capability
• Switchable 20 dB preattenuation pad
• Switchable bass cut filter
• Legendary, pristine AKG sound quality
• Complete with spider-type shock mount and aluminium carrying case