Content | Scan-Speak Discovery, 22W/4534G00, 8" Midwoofer, 4 ohm
- NRSC Fibre Glass Cone; Scan-Speak Patented Technology
- Fibre Glass dust cap
- High sensitivity 92dB
- Long Linear excursion
- 30Hz Resonance Frequency
- Diecast Aluminium basket
- Vents below spider
- Low damping rubber surround
Madisound recommends:
- 0.55 cubic foot (15.5 ltrs) sealed, F3 70
- 1 cubic foot (28 ltrs) vented, 2" x 6“, F3 49
The GF series is designed for the discerning audiophile customer. To meet the needs of this audience, several new technologies were developed with the goal of lowering distortion and damping in the speaker. The coated fiberglass cone reduces vibration and standing waves, and the vented motor system minimizes power compression. The combined result is a very open and dynamic sound.
The 22W/4434G has the same frame size and should be considered as a replacement for the PL22WO09-04 or the MG22WO09-04. |
-
- 8” neodymium magnet driver with 1.5” voice coil, providing 200Wrms (AES) continuous power handling
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in the magnet assembly provides low harmonic distortion
- M-roll surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
General specifications
Nominal diameter (mm/in) |
203/8 |
Power Rating (AES, W rms) |
200 |
Nominal impedance (Ω) |
8 |
Voice coil diameter (mm/in) |
50.8/2.0 |
Magnet type |
Neodymium |
Chassis type |
Cast aluminium |
Sensitivity (dB) |
92 |
Frequency range (Hz) |
70-6000 |
Coil material |
Round copper |
Cone material |
Kevlar loaded paper |
Surround material |
Cloth-sealed |
Suspension |
Single |
Xmax (mm/in) |
4/0.16 |
Gap depth (mm/in) |
8.0/0.32 |
Voice coil winding width (mm/in) |
15.0/0.63 |
Small Signal Parameters
D (m/in) |
0.17 |
Fs (Hz) |
80.3 |
Mmd (g/oz) |
22.39 |
Mair |
1.94 |
Qms |
1.33 |
Qes |
0.59 |
Qts |
0.41 |
Re (Ω) |
5.85 |
Vas (lt/ft3) |
11.3/0.399 |
BI (Tm) |
11.22 |
Cms (mm/N) |
0.16 |
Rms (kg/s) |
9.6 |
Le (mH) |
|
Mounting Information
Overall diameter (mm/in) |
225/8.8 |
Overall depth (mm/in) |
100/4.16 |
Cut-out diameter (mm/in) |
187/7.4 |
Mounting slot dimensions (mm/in) |
6.5/0.26 |
Number of mounting slots |
8 |
Mounting slot PCD/ width accross flats |
210/8.3 |
Unit weight (kg/lb) |
1.52/3.34 |
|
- 2'' voice coil Kapton former
- Ventilated magnet and voice coil to reduce power compression
- 94.6 dB sensitivity
Manual/Εγχειρίδιο
|
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil for low Power Compression
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 5.9 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 92 dB
* Frequency Range 80 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.27“, 7 mm
* Flux Density 1.05 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 74 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 8.9 N/A
* Diaphragm Mass inc. Airload (Mms) 23 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2 Kg/s
* Electromagnetic Q (Qes) 0.69
* Mechanical Q (Qms) 5.30
* Total Q (Qts) 0.61
* Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
* Surface Area of Cone (Sd) 27.5“², 177.3 cm²
* Maximum Linear Excursion (Xmax)* 8.48 mm
* Xdamage** 12.9 mm
* Coil Inductance (Le) 0.6 mH
* Diaphragm mass (Mmd) 21.6 g
* Eta Zero 0.5 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Nom. Diameter 200 mm (8 in)
Overall Diameter 223.75/207.9 mm (8.81/8.19 in)
Bolt Circle Diameter 210 mm (8.27 in)
Baffle Cutout Diameter 183 mm (7.20 in)
Depth 110.7 mm (4.36 in)
Flange and Gasket Thickness 10.7 mm (0.42 in)
Net Weight 2.7 Kg (5.95 lb)
Shipping Box
(Single Carton Box) 246x246x150 mm (9.69x9.69x5.91 in)
Shipping Weight 3.4 Kg (7.50 lb)
Nom. Impedance 8 Ohm 8 Ohm
Minimum Impedance 6.6 Ohm 6.9 Ohm
Nom. Power Handling *** 250 W 30 W
Max Power Handling **** 500 W 60 W
Sensitivity (1W/1m) ***** 95 dB 107 dB
Frequency Range 75÷4000 Hz 1500÷20000 Hz
Voice Coil Diameter 65 mm (2.50 in) 37 mm (1.46 in)
Winding Material Al Al
Former Material Glass Fiber Kapton
Winding Depth 12.5 mm (0.49 in) 2.1 mm (0.08 in)
Magnetic Gap Depth 8 mm (0.31 in) 2.6 mm (0.10 in)
Flux Density 1.2 T 1.85 T
Min. Cross. Freq. ****** - 1700 Hz
Dispersion Angle - 90°
Diaphragm Material - Ketone Polymer
Diaphragm Shape - Annular
Fs 76 Hz
Re [LF] 5.5 Ohm
Re [HF] 5.5 Ohm
Qes 0.31
Qms 10.5
Qts 0.3
Vas 12.6 dm^3 (0.44 ft^3)
Sd 211 cm^2 (32.71 in^2)
Xmax * 4.92 mm
Xdamage ** 10.2 mm
Mms 22 g
Bl 13.7 N/A
Le 0.51 mH
Mmd 20.3 g
Cms 0.2 mm/N
Rms 1 Kg/s
Eta Zero 1.74 %
EBP 245 Hz
|
Reviews
There are no reviews yet.