Content |
- Original SCANSPEAK Speaker Diaphragm 290060
- Replacement for and many many others
- Voice coil: (25.4mm)
- Diameter: mm
- Length: mm
- Impedance: DCR: ohm
- Titanium dome
- Fits Driver and Cabinet Models: HDS, D608/9130, Peerless 810921,
Finally, Scan Speak has a replacement voice coil for the popular HDS, D608/9130 tweeter (810921).
These are field replaceable – just un screw the front plate, remove the old one and insert the new one over the locator pins. Reassemble the front plate and you are back in business.
FYI – This tweeter used to be the Peerless, HDS, 810921
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
Replacement diaphragm kit for 44XT™driver
Impulse 1582, HV1582, DTH 4115, DTH 4215, DTH 4210, DTH4115F, DTH 4215F, DTH 4210F, DTH SM Left, DTH SM Right, SP1G,ILS 1564V, SP1X, SP7X, ILS 1564H, ILS 1594V, ILS 1594H,ILS 1264V, QW ML, QW MR, SP7G, ILS 1264H, ILS 1294H,ILS 1294V, QW 1, QW 2, QW 2F, QW 4, QW 4F, Q Factor 2212, SSE 1595
|
Reviews
There are no reviews yet.