Large-diaphragm condenser microphone Polar pattern: Cardioid Handmade capsule Noise: 9 dB (A) Boundary sound pressure level: up to 160 dB (THD 0.5%) LoCut filter: 80 Hz, 160 Hz Pad: 0 dB, -10 dB, -20 dB Gold-plated XLR contacts Requires 48 V phantom power Dimensions (diameter x height): 58 x 168 mm Weight: 440 g
Polar pattern: Cardioid Handmade capsule Noise: 9 dB (A) Boundary sound pressure level: up to 160 dB (THD 0.5%) LoCut filter: 80 Hz, 160 Hz Pad: 0 dB, -10 dB, -20 dB Gold-plated XLR contacts Requires 48 V phantom power Dimensions (diameter x height): 58 x 168 mm Weight: 440 g
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “sE X1 S LARGE DIAPHRAGM CONDENSER MICROPHONE” Cancel reply
Polar pattern: Cardioid Handmade capsule Noise: 9 dB (A) Boundary sound pressure level: up to 160 dB (THD 0.5%) LoCut filter: 80 Hz, 160 Hz Pad: 0 dB, -10 dB, -20 dB Gold-plated XLR contacts Requires 48 V phantom power Dimensions (diameter x height): 58 x 168 mm Weight: 440 g
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
The studio microphone classic
Three directional characteristics: omni, cardioid, figure-8
Switchable low frequency roll-off
Switchable 10 dB pre-attenuation
Ideal as main and as support microphone in the most differing recording situations
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Omnidirectional, cardioid, figure-8 plus
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
20/28/22 mV/Pa1)
Rated impedance
200 ohms
Rated load impedance
1 kohms
Equivalent noise level, CCIR2)
26/23/25 dB1)
Equivalent noise level, A-weighted2)
15/12/14 dB-A1)
Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL)
68/71/69 dB1)
Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL)
79/82/80 dB1)
Maximum SPL for THD 0.5%3)
117 dB (cardioid)
Maximum SPL for THD 0.5% with preattenuation3)
127 dB
Maximum output voltage
390 mV
Dynamic range of the microphone amplifier (A-weighted)
105 dB
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Current consumption (P48, IEC 61938)
0.8 mA
Matching connectors
XLR3F
Weight
500 g
Diameter
56 mm
Length
200 mm
Behringer C-1 Studio Condenser Microphone
Behringer C-1 Studio Condenser Microphone
The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
Professional large-diaphragm condenser microphone for unsurpassed audio quality
Ideal as main and support microphone for studio and live applications
Exceptionally flat frequency response and ultra-high sound resolution
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Ultra low-noise transformerless FET input circuitry
LED indicates phantom power operation
Gold-plated 3-pin XLR output connector for perfect signal transmission
Ultra-rugged construction with die-cast body
Swivel stand mount and carrying case included
Operating Principle
Pressure Gradient
Capsule
Condenser
Diaphragm
0.63" / 16.0 mm
Polar Pattern
Cardioid
Performance
Frequency Range
40 Hz to 20 kHz
Maximum SPL
136 dB SPL
Impedance
100 Ohms
Load Impedance
1000 Ohms
Sensitivity
-33 dB
THD
1%
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin
Power
Operating Voltage
36 to 52 V
Operating Current Consumption
2.5 µA
Physical
0.93 lb / 0.42 kg
Dimensions
ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
Behringer C-2 2 Matched Studio Condenser Microphones
2 Matched Studio Condenser Microphones
2 matched condenser microphones for stereo studio recording and live applications
Ideal as main and support microphones for studio and live applications
Cardioid pickup pattern for effective feedback elimination
Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
Switchable low-frequency roll-off and input attenuation
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Excellent Source Isolation
Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist.
The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort!
Sound That Astounds
Every stitch of these mics is designed to deliver beautiful sound. Beginning with the gold-plated 3-pin XLR connector, you get the highest signal integrity.
Once connected to your system, youʼll notice these twin pro-caliber microphones have a 4 dB boost in the 1 kHz - 8 kHz range. For those of you new to condenser mics, this basically means youʼll get a slightly brighter sound that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs also benefit greatly from this type of frequency response.
Excellent Source Isolation
The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort!
Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist.
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world.
As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.
Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.
Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.
An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern
cardioid
Frequency range
20 to 20,000 Hz
Sensitivity
25 mV/Pa (-32 dBV)
Max. SPL
140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3)
25 dB
Equivalent noise level
14 dB-A
Signal/noise ratio (A-weighted)
80 dB
Preattenuation pad
10 dB, switchable
Bass filter
6 dB/octave below 500 Hz
Impedance
200 ohms
Recommended load impedance
>1000 ohms
Supply voltage
9 to 52 V phantom power to DIN 45596
Current consumption
Connector
3-pin XLR
Finish
silver gray
Net weight
320 g / 11.3 oz.
Shipping weight
950 g / 2.1 lbs.
Patent(s)
Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.