SENNHEISER XSW-1-ME2-B Lavalier Set

Inspire your audience. Go for XS WIRELESS 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band. The XS WIRELESS 1 LAVALIER MIC SET is an easy to use all-in- one wireless system for presenters and moderators, excellent for a powerful and inspiring presentation. The set includes an intuitive stationary receiver for quick set-up and hassle-free handling, as well as a lightweight bodypack transmitter and an unobtrusive clip-on microphone.

FEATURES

• Compact bodypack transmitter, unobstrusive clip-on microphone
• Antenna-switching diversity reception
• Integrated antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Selectable UHF frequencies within a large bandwidth
• Up to 10 compatible channels
• Microphone condenser 
• THD, total harmonic distortion ≤ 0.9% 
• Pick-up pattern cardioid 
• Signal-to-noise ratio ≥ 103 dBA 
• RF output power 10 mW 
• Switching bandwidth up to 24 MHz 
• Operating time approx. 10 hrs 
• Modulation wideband FM 
• Output voltage '1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu 
• Housing rugged ABS housing 
• Diversity reception antenna switching diversity via internal antennas 
• Frequency 8 frequency banks, each with up to 10 factory-preset channels 
• Sensitivity
• SPL for peak deviation 130 dB 
• Squelch adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) 
• Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) 
• Input sensitivity 1.5 mV / Pa 
• Audio adjustment range 45 dB, adjustable in 5-dB steps 
• Line / Mic level 20 dB, switchable 
• Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C 
• Receiver Principle double superheterodyne 

• Dimensions approx. 200 x 42 x 127 mm 
• Weight approx. 340g 
• Power supply 12 V DC nom. / 300 mA 
• AF frequency response 50 to 16,000 Hz (–3 dB) 

• Dimensions approx. 71 x 96 x 28 mm 
• Weight approx. 95g 
• Power supply 2 AA size batteries, 1.5 V 
• Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps 

• 1 receiver EM-XSW 1
• 1 lavalier microphone ME 2-2
• 1 bodypack transmitter SK-XSW
• 1 power supply NT 12-5 CW
• 2 AA batteries

Set with portable 3.5mm TRS transmitter and portable 3.5mm receiver without a lavalier microphone

General Characteristics

• Wireless entry-level plug & play series operating in the 2.4 GHz spectrum for license-free worldwide use
• Lightweight, compact plug-on transmitters and receivers, offering either XLR, jack (6.3mm, 1/4”) or mini jack (3.5mm, 1/8”) connections as well as a pedalboard receiver with female jack and XLR male chassis outputs
• Intuitive single-button interface to manage all power, linking, muting and battery monitoring tasks
• Up to 5 systems can be operated simultaneously at a maximum range of up to 75m
• All portable devices feature USB re-chargeable lithium-ion batteries that provide up to 5 hours of runtime 

• XSW-D-Mini-Jack-Tx 3.5mm female socket portable transmitter
• XSW-D-Mini-Jack-Rx female socket portable receiver
• Belt clip for the XSW-D-Mini-Jack-Tx transmitter
• Cold shoe mount
• 3.5mm coiled cable
• USB-A to USB-C charging cable

• Simple to set up and use
• 2 x 4 channel frequency plan for enhanced flexibility
• Rack mountable for easy installation
• Intuitive receiver and transmitter controls
• ATR35cW omnidirectional condenser lavalier microphone
• Up to 10 hours battery life

• Designed for quick and easy use
• Frequency plan of 2 groups of 4 channels for increased flexibility
• Perfect balance between price and performance
• Discreet and robust pocket transmitter
• RF transmission power 10mW
• Up to 10 hours with 2 x 1.5V AA batteries
• Comes with ATR35cW omnidirectional condenser lavalier microphone
• RF Indicator light
• Robust construction of superior quality components

Introducing AT-One, Audio-Technicaʼs entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-Oneʼs frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11/PF comes equipped with the ATR35cW tie-clip microphone.

• Designed for quick and easy use
• Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
• The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
• Users can choose up to 4 channels in a group
• The ATW-11F system is equipped with a discreet and robust pocket transmitter
• RF Transmitting power 10mW
• Comes with an ATR35cW miniature omnidirectional condenser microphone
• Up to 10 hours' battery life with 2 x 1.5V AA batteries
• RF Indicator light
• Robust construction from high quality components
• Delivered in a transport case with a rack mount kit and detachable antennas

AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.

The display on the half-rack receiver clearly indicates both the RF and AF levels.

The ATW-R1F receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.

    Designed for Club Sound, House of Worship, Performance & Sports Venues, and other applications.
    ClearScan finds the clearest channel available with the touch of one button
    EZsync infrared channel transfer from the receiver to the transmitter for easy and error-free setup
    14 hour battery life from two AA alkaline batteries
    Rugged metal transmitters with backlit LCD display and battery gauge
    32 preset channels, with compatible groups of 8 channels for simultanious use
    Bodypack with TA4 connector – compatible with all Electro-Voice lapel and headworn microphones for easy upgrades
    Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system
    Metal receiver chassis with optional rack mount ears and front mount antenna cables

Antennas    Flexible TNC 1/2 Wave
Audio Frequency Response    80 Hz - 18kHz +/- 2dB
Balanced Line Level Output (RMS Adjustable)    10 - 100 mV
Battery Life    14 Hours with (2) AA alkalines typical
Case Material    Metal
Connector Type    1/4 inch unbalanced, 3-Pin XLR balanced
Controls    On/Off, Set, Up, Down, Sync
Distortion (@ 1 kHz, 40 kHz deviation)    less than 1.0, 0.4 typical %
Diversity    True Antenna
Dynamic Range    > 95 dB
Dynamic Range    greater than; 95 dB
Element    PL22 Cardioid Dynamic
Element    ULM-18 Uni-directional lapel
Number of Channels    32 Per Band, 8 Simultaneous
Power Supply    12 VDC, 500 mA max
Receiver Type    Synthesized PLL, Agile UHF
RF Frequency Range    16 MHz
RF Output    8 mW Typical
RF Sensitivity (12 dB SINAD)    < 1.0 uV
RF Sensitivity (12 dB SINAD)    Less than 1.0 uV
Signal-to-Noise Ratio (A-weighted)    greater than 100 dB
Signal-to-Noise Ratio (A-weighted)    > 100 dB
Squelch    Tone code plus Amplitude

Versatile wireless systems for those who sing, speak or play instruments with up to 42 MHz tuning bandwidth in a stable UHF range and fast, simultaneous setup of up to 12 linked systems. The perfect choice for moderators and presenters: Robust bodypack transmitter and unobtrousive clip-on microphone ME 2-II (omni-directional) or ME 4 (cardioid) with high speech intelligibility for easy hands-free operation on any stage. Features

• Engineered for professional live sound: Rugged all-in-one wireless system for presenters and moderators.
• Robust bodypack transmitter and unobstrusive clip-on microphone ME 2-II (omni-directional) or ME 4 (cardioid) with high speech intelligibility for daily use on stage
• True diversity half-rack receiver in a full-metal housing with intuitive LCD display for full control
• Easy and flexible wireless synchronization between transmitter and receiver via infrared
• Fast frequency allocation for up to 12 receivers via new linking functionality
• Up to 20 compatible channels
• Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
• Transmission Range: up to 100 meters / 300 feet
• High RF output power (up to 30 mW) depending on country regulations

• Dimensions Approx. 82 x 64 x 24 mm 
• Compander Sennheiser HDX 
• THD, total harmonic distortion ≤ 0.9 % 
• Weight (incl. batteries) approx. 160 g 
• Signal-to-noise ratio ≥ 110 dBA 
• RF output power Max. 30 mW 
• Switching bandwidth up to 42 MHz 
• Peak deviation ±48 kHz 
• Nominal deviation ±24 kHz 
• Operating time Typically 8 h 
• Modulation Wideband FM 
• Power supply 2 AA batteries, 1.5 V or BA 2015 accupack 
• Current consumption at nominal voltage: typ. 180 mA 
• with transmitter switched off: ≤ 25 µA 
• Input impedance 40 kΩ, unbalanced / 1 MΩ 
• Max. Input voltage 3 Veff 
• Powering 3 V battery / 2.4 V rechargeable battery 
• Transmission frequency Max. 1680 transmitting frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels 
• AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz 
• Temperature Range -10 °C to +55 °C 
• Frequency stability ≤ ±15 ppm 

• Dimensions Approx. 190 x 212 x 43 mm 
• Compander Sennheiser HDX 
• THD, total harmonic distortion ≤ 0.9 % 
• Weight Approx. 980 g 
• Audio output 6.3 mm jack socket (unbalanced): +12 dBu 
• XLR socket (balanced): +18 dBu 
• Signal-to-noise ratio ≥ 110 dBA 
• Switching bandwidth up to 42 MHz 
• Peak deviation ±48 kHz 
• Nominal deviation ±24 kHz 
• Modulation Wideband FM 
• Power supply 12 V DC 
• Antenna connector 2 BNC sockets 
• Current consumption 300 mA 
• Adjacent channel rejection Typically ≥ 65 dB 
• Intermodulation attenuation Typically ≥ 65 dB 
• Receiving frequency Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels 
• RF sensitivity < 2.5 μV for 52 dBA eff S/N 
• Squelch low: 5 dBµV middle: 15 dBµV high: 25 dBμV 
• Equalizer Preset 1: Flat 
• Preset 2: Low Cut (-3 dB at 180 Hz) 
• Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) 
• Preset 4: High Boost (+6 dB at 10 kHz) 
• Temperature Range -10 °C to +55 °C 
• Receiver Principle True diversity 
• Blocking ≥ 70 dB 

• Connector 3.5 mm jack 
• Frequency response 50 to 18,000 Hz 
• Max. sound pressure level 120 dB 
• Cable length approx. 1.60 m 
• Transducer principle pre-polarized condensor microphone 
• Pick-up pattern cardioid 
• Sensitivity in free field, no load (1kHz) 40 mV/Pa 
• Equivalent noise level 31 dB 

• EM 100 G4 true diversity receiver
• SK 100 G4 bodypack transmitter
• ME 2 clip-on microphone (ew 100 G4-ME2 set only)
• ME 4 clip-on microphone (ew 100 G4-ME4 set only)
• GA 3 rackmount set
• power supply
• 2 AA batteries
• 2 rod antennas
• RJ 10 cable