| Content | Raise your voice. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions. The XS WIRELESS 2 VOCAL SET is an easy to use all-in-one wireless system for singers and presenters featuring Sennheiserʼs renowned evolution microphone capsule e835 (superior dynamic, cardioid) to perform under pressure. True Diversity receiver in a metal housing and rackmount kit included.
FEATURES
- Excellent live sound featuring Sennheiserʼs renowned evolution microphone capsules
- True diversity receiver with metal housing
- External antennas
- Automatic frequency management and synchronization via
- remote channel for easy setup
- Fully tunable over a wide range of UHF frequencies
- Rackmount kit included
- Up to 12 compatible channels
- Microphone: dynamic
- Frequency response: 50 to 16,000 Hz (–3 dB)
- THD, total harmonic distortion: ≤ 0.9%
- Pick-up pattern: cardioid
- Signal-to-noise ratio: ≥ 103 dBA
- RF output power: 10 mW
- Switching bandwidth: up to 24 MHz
- Operating time: approx. 10 hrs
- Modulation: wideband FM
- Output voltage: 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu
- Frequency: 8 frequency banks, each with up to 12 factory-preset channels
- Frequency range: A: 548-572 MHz
- GB: 606-630 MHz
- B: 614-638 MHz
- C: 766-790 MHz
- D: 794-806 MHz
- E: 821-832 MHz, 863-865 MHz
- K: 925-937.5 MHz
- Sensitivity:
- Squelch: switchable from 3 dBμV to 28 dBμV (via Pilot Tone)
- Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization)
- Line: 20 dB, switchable
- Input sensitivity: 1.5 mV / Pa
- Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps
- Audio adjustment range: 40 dB, adjustable in 5-dB steps
- Temperature: Range operation: 0°C to +40°C
- storage: –20°C to +70°C
- Receiver Principle: double superheterodyne
- Diversity principle: True Diversity
WHAT'S IN THE BOX?
- 1 receiver EM-XSW 2
- 1 handheld transmitter SKM 835-XSW
- 1 microphone clamp MZQ 1
- 1 power supply NT 12-5 CW
- 2 AA batteries
- 1 rackmount kit
- 1 pouch
- user manual
TECHNICAL DATA
Receivers
- Dimensions approx. 200 x 42 x 127 mm,microphone: approx. 260 x 50 mm
- Weight approx. 680g
- Power supply 12 V DC nom. / 300 mA
- Housing Metal, microphone: robust ABS
- AF frequency response 50 to 16,000 Hz (–3 dB)
Microphone
- Weight approx. 245g
- Power supply 2 AA size batteries, 1.5 V
- AF frequency response 80-14,000 Hz
|
System Includes | BLX2 | Handheld transmitter with choice of microphone cartridge. | | BLX4 | Single channel wireless receiver with microprocessor-controlled internal antenna diversity. |
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it's the most accessible way to own the stage.
Includes BLX4 single-channel receiver, BLX2/PG58 handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide.
|
- The WMS 40 Mini Vocal Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.
The rugged HT 40 Mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh cap protecting the cardioid dynamic microphone element. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI receiver, an HT 40 MINI handheld transmitter, a universal power supply with US/UK/EU adapter, and one AA size dry battery.
Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. |
System Specifications
- Operating Frequencies: UHF band
- Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
- Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
- Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
- Not all frequencies are available in all areas. Please check with local regulations.
- Minimum Frequency Step: 25 kHz
- Modulation Mode: FM
- Maximum Deviation: +/-35 kHz
- Dynamic Range: > 110 dB (A-weighted), typical
- Total Harmonic Distortion: < 1% (at 1 kHz, +/-17.5 kHz deviation)
- Operating Range: 100 m (300\'), typical
- Open range environment with no interfering signals.
- Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
- Battery and LCD performance may be reduced at very low temperatures.
- Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
- Receiving System: True diversity
- Image Rejection: 60 dB nominal, 55 dB minimum
- RF Sensitivity: 20 dBuV at 60 dB S/N ratio
- Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
- Antenna Input: BNC-type, 50 ohms
- Bias voltage 12V DC, 60 mA, each
- Power Requirements: 12-18V DC, 500 mA
- Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H, not including BNC connectors or feet.
- Net Weight: 1.1 kg (38.8 oz), without accessories
- Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Handheld Transmitter
- RF Power Output: High: 30 mW; Low: 10 mW, (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Microphone Element: ATW-T341b: Dynamic cardioid
- Batteries: Two 1.5V AA, not included
- Battery Life: High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
- Depending on battery type and use pattern.
- Dimensions: ATW-T341b: 237.0 mm (9.33“) long, 48.0 mm (1.89“) diameter
- Net Weight: ATW-T341b: 284 g (10.0 oz), without batteries
- Accessory Included: AT8456a Quiet-Flex(TM) stand clamp Dimensions and Weight in PackagingChannel D (655.500 MHz to 680.375 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in Channel I (482.000 MHz to 507.000 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in Channel C (541.500 MHz to 566.375 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 16 x 14 x 4 in
|
The WS-5200 includes a handheld wireless microphone WM-5220 and a diversity tuner WT-5810. The WM-5220 Wireless Microphone employs an electret condenser microphone capsule and is suitable for any applications. Thanks to the PLL-synthesizer system, 64 different operating frequencies are made available. A high output power ensures stable radio signal transmission. The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
| Product Composition | Handheld wireless microphone WM-5220 …1, Diversity tuner WT-5810 …1 | | Frequency Range | 636 - 865 MHz(*2), UHF | | Tone Frequency | 32.768 kHz | | Operating Temperature | -10 ℃ to +50 ℃ | | Accessory | AC adapter(*3) …1, Screw driver …1,
Microphone holder (with stand adapter) …1, Strage case …1 |
| The WMS40 mini2 Sets ensure brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic
sound at any time.
The SR40 mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF
status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the
level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with
EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off
simultaneously.
The PT40 mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR
input allows you to connect every compatible AKG miniature microphone.
The rugged HT40 mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh
cap protecting the cardioid dynamic microphone element. Battery life is the same legendary 30 hours off
a single AA battery as for the standard WMS40 models, reducing the need to replace batteries and thus
saving real money in the long run. Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
KEY SPECIFICATIONS
Carrier frequency range 660 to 865 MHz
Modulation FM
Audio bandwidth 40 to 20,000 Hz
Frequency stability (-10°C to +50°C) ±15 kHz
T.H.D. at 1 kHz typ. 0.8%
Compander integrated
Signal/noise ratio typ. 105 dB(A)
RF output typ. Max. 10 mW
Power requirement single 1.5-V AA size battery
Battery life >30 hours |
Reviews
There are no reviews yet.