| Content |
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
| Adam Hall Connectors 4 STAR A JF3 MM3 Adapter 6.3 mm jack stereo female to 3.5 mm jack stereo male
Our adapter series consists of little helpers and some "must-have's", like the 4 STAR A JF3 MM3. With this adapter you can change a 6.3 mm jack plug to a 3.5 mm minijack. Some earphones use 6.3 mm jack plugs, but some computers only have minijack socket. Here is your solution.
Product type
Plugs and Connectors
Gender of connector 1
female
Gender of connector 2
male
| PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC，2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box |
- 2 channels
- 2 XLR inputs
- 2 XLR outputs
- Switch for +12 V or +48 V
- Including power supply
|
The APT20 is a phantom power supply unit for use with two condenser microphones. It supplies 48 V DC to the microphones and routes the signal to a mixer or microphone amplifier. It features XLR connections for in- and output, and at the back is an euro power connection with power switch provided. ![]()
|
The K6 powering module is the heart of this Sennheiser professional modular
microphone system and can be powered either by its internal 'AA' size 1.5 V
battery or by 12 - 48 V phantom power. The K6 can be combined with different
condenser microphone heads to provide a wide variety of polar patterns. Matt
black, anodised scratch-resistant finish.
Profile
Powering module for battery/phantom powering with switchable roll-off filter, battery
on/off switch with battery test. Suitable for ME 62 - ME 67 microphone heads and
-60 versions of MKE microphones.Transmission factor 0 dB at 1 kHz, nominal
impedance 200 Ohm, min. terminating impedance 1 kOhm, max. output voltage 2 V
(at 1 kHz), power supply: phantom powering 12 - 48 V or 1.5 V (AA size)alkaline
battery, supply current 2.2 mA, battery life approx. 150 h, dimensions in mm:
? 22 x 155, resultant length 94 mm, weight approx. 45 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6 powering module
1 MZQ 200 microphone clamp
1 AA battery
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm
Min. terminating impedance 1000 Ohm
Output voltage 2 V
Power supply Phantom 12 - 48 V 1x Typ IEC LR 06
Current consumption 2,2 mA
Operating time (Battery) max. 150 h
Dimensions d 22 x 94 mm (netto)
Weight ca. 45 g
Gain 0 dB
|
Reviews
There are no reviews yet.