| Content |
• 3x 1W LEDs
• Plug and Play
• Including IR Remote
• RGB Mirrorball effect
The bumper stars is one of the most compact star effects available. With only a diameter of 80mm this effect gives a colorful effect on your ceiling and walls. It is equipped with 3x 1W R,G,B LEDs and rotates on the beat of the music or can be set in static mode.
The Showtec Bumper range consists 5 compact bright light effects. They all are plug and play and brings the party at home without the need of any technical settings or controllers. With the bumper series you have all effects you need to create the real club feeling, the strobe, the waves, the mushroom, the flower and the Stars. They are all including an IR remote to get in control of Color, Strobe functionality and Sound or Auto mode to set the right ambiance for your gig.
Specifications Power supply: 12V DC Adapter incl.
Power consumption: 12 Watt
LED system: 1W Red , 1W Green, 1W Blue
Control: IR Remote
Operation mode: Auto, Sound, Color
Dimensions: Ø 80 x 95mm
Weight: 0,3Kg
|
ADJ's Quad Phase HP is designed to fill a room and dazzle a crowd with dozens of razor sharp beams of light. This technologically advanced moonflower features a high-powered, 32-Watt 4-in-1 quad color LED source (RGBW). Offering twice as many majestic colors as a "TRI LED“, the Quad Phase HP produces up to fifteen colors in all.
The Quad Phase HP also offers all the latest features sought after in special effects lights such as: DMX-512 for programming or linking capabilities, exciting built-in sound active programs, no duty cycle (run all night), a long life, high output LED source (30,000 hours), 4-button DMX display on rear (for easier programmability), IEC power daisy-chaining, and a 1.8-degree steeper motor for smooth movement. The Quad Phase HP may be controlled by a DMX Controller or ADJ's UC3 easy-to-use mini controller.
Specifications:
High output Moonflower effect with 32-Watt Quad-Color LED 4-in-1 (Red, Green, Blue, White) technology produces color-changing beams of light
Dozens of razor sharp beams fill a dance floor, ceiling or wall
Using a 1.8 Degree Long Life Stepper motor Technology it can produce quick accurate movement or smooth fluid move movements for mood music
4 DMX Channels (Color, Rotation, Strobe, Dimmer)
Operation modes: Sound Active, Master/Slave or DMX-512
Exciting built-in programs (Sound Active & Master/Slave modes)
Produces 15 Preset Colors
Linkable via 3-pin XLR cable
4-button DMX display on rear panel
Beam Angle: 65 degree
Strobe & Pulse LED Effect
DMX-512 Protocol
Electronic Dimming: 0 - 100%
Runs extremely cool! - NO Duty Cycles! - Run all night!
Compatible with the ADJ UC3 easy-to-use controller (sold separately)
IEC AC IN/OUT on rear to daisy chain power (up to 5 Quad Phase HP's @ 120V and 9 Quad Phase HP's @ 230V)
Safety hook on rear panel
Power Draw: 64W Max
Multi voltage: 100V~240V, 50/60Hz
Long life LEDs (30,000 hr. rating)
Light Source: 32W RGBW LED 4-in-1
Dimensions (LxWxH): 12.5" x 8" x 11" / 312 x 198 x 279mm
Weight: 9 lbs. / 4 kg.
|
The LookFan is the ideal accessorie for the fog generators viper 2.6 and Orka.
Due to the powerful air flow the fog can be distributed quick and constant within
a room.
The hanging yoke guarantees a most flexible use. With the two star knobs screws
the fan can be fixed quick and easy in every requested position.
The connection to the viper 2.6 or Orka is done with a special plug. The LookFan
can then easily be controlled via a second channel at the DMX desk or directly at
the machine. It can also be used as a single wind machine.
Technical Data
Procedure Centrifugal blower
Voltage 230 V / 50 Hz
Air volume 1060 m3 / h
Speed 1850 min-1
Power 355 W
Current 1,55 A
Capacitor 8/450 ?F / VDE
Noise level 66 dBA
Dimensions without yoke
(L x W x H) 25 x 20 x 21.6 cm
Weight 3.6 kg
| Features:
1.Strobe effects, red, green and blue three colors change.
2.Its light spot on the wall, the effect likes glass ball, very bright and powerful.
3.Control mode: Auto, voice-activated,MP3.
4. Good quality warranty, we check and test it one by one,safe and reliable.
5.Long working life, excellent stability,small and exquisite appearance.
6.Suitable for disco, ballroom, KTV, bar, stage, club, party ,wedding etc.
Specification:
Lighting color: RGB, 6X3W, red,green,blue,yellow,white,purple
Shell material: Plastic
Light power: 10-25W
Light Source: 6x3w led
Light angel: 120 degree
Working mode: automatic or sound control
Motor: stepping motor
Input: AC 110-240V/50-60Hz
Product size: Approx: 6.3* 7.87 inch (16cm*20cm) | Complete set with UV tube
UV tube 120cm/36W. (51101520)
- UV tube with casing, power cord and power plug
- High ultraviolet light
- Warm-up time approx. 3 min
- Controlling by on/off switch on device
- With a beam angle of 100°
- For application areas such as: Party room; mobile djs/entertainer; Clubs/dancing school
illuminant
Package contents
- 1 x device, 1 x illuminant, 2 x mounting material, 2 x screw, 1 x user manual
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
40 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Fixed power supply cord with safety plug |
| Cable length: |
Approx. 1,7 m |
| Base: |
2 x G-13 |
| Control: |
On/off switch on device |
| Beam angle: |
100° |
| Beam angle (1/2 peak): |
100° |
| Housing color: |
Black |
| Diameter mounting holes: |
2 x Ø4mm |
| Material: |
Metal, 1 mm |
| Dimensions: |
Length: 1,23 m
Width: 10 cm
Height: 4 cm |
| Weight: |
3,21 kg |
| Illuminant |
| Base: |
2 x G-13 |
| Lamp type: |
Fluorescent lamp |
| Color of light: |
UV-reflecting |
| Lead time: |
180 s |
| Construction: |
Tube T12 |
| Wavelength: |
365 nm |
|
Specifications:
- 84 5mm LEDs 21 Red, 21 Green, 21 Blue & 21 White LEDs)
- 2 DMX Modes: 3 Channel Mode; 28 Channel mode for programming flexibility
- 3 operational modes: DMX-512; Master/Slave: Sound Active
- Built-in high-energy lighting programs (Master/Slave & Sound Active)
- Beam angle: 116 degrees
- Color strobe effect (fast to slow)
- Electronic Dimming 0 - 100%
- Linkable via 3-pin XLR cable
- 4-button LED display on rear panel
- IEC IN/OUT on rear to daisy chain power
- Includes mounting brackets
- Compatible with ADJs UC3 Controller (Sold Separately)
- Power Draw: 9W (120V) / 13W (230V)
- Multi-voltage operation: 120-240V AC,/ 50~60Hz
- Dimensions without bracket (LxWxH): 250x317x182mm
- Weight: 2.0 kg
LED Advantages:
- Long life (Rated at 100,000 hrs.)
- Low power consumption
- Very low heat output
- Run all night
- RGBW Color Beams & Color Chasing
- Colors won`t fade in time
|
Reviews
There are no reviews yet.