Content |
LED Orbit I
LED Moving Head
The Orbit One is the first LED moving head by Showtec. It is a powerful moving head which is equipped with 36 1W LED's, offering an enormous light output.
The RGB colour mixing provides an unlimited selection of colours to the user. It has a precise and accurate 16 bit movement as well as auto-correction on pan and tilt movement.
Specifications
• Power Supply 90-250V AC, 47-63 Hz
• Power consumption: 70W
• LED/unit: 36 x 1W LED
(12 x Red, 12 x Green, 12 x Blue)
• Beam Angle 50 degree
• 16 bit resolution
• 540 degree pan movement
• 270 degree tilt movement
• RGB colour mixing
• Dimmer 0-100%
• Strobe 1-25 Hz
• Dimensions: 350 x 290 x 300 mm
• Max. ambient temp. 40 degrees
• DMX-512 (12 channels)
• Master/Slave function
• Stand alone function
|
|
This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.
|
LED Cube 30 cm.
Decorative light-emitting LED Cube
The LED Cube has 81 built-in LEDs. Due to the high number of LEDs used, the light is spread equally, thus creating an astonishing effect. It can be easily mounted with the hook on top of the unit. You can also put it on any surface. The LED Cube can also be used outdoor (IP-66) and can be controlled by its controller (41140).
Technical Info
Total LEDs: 81 (27 red, 36 green, 18 blue)
Protection rating: IP-66
Power Supply: 24V (by controller: 41140)
Power Consumption: 12W
Dimensions: 30x30x30 cm (LxWxH)
Weight: 2,6 Kg |
Black 1,28-2,08m/
30kg
Technical Info
Weight: 8,58 kg
Max. Load: 30 kg
Diameter: 35 mm
Length; max. 2,08 m
|
Introducing the new Korg nanoSERIES. These USB-powered, slim-line controllers are designed to make the most of your valuable studio space, and are small enough to take with you on any musical journey. Place one in front of your laptop, rest one on your workstation, park one on a recording console - or anywhere else you need versatile control over your DAW, virtual instrument, effect or DJ software. Small in size, all three controllers go HUGE when it comes to functionality, yet their intuitive layouts provide extremely easy operation for any user.
So c'mon; meet the nanos! The nanoKEY features a great-feeling 25-key velocity-sensitive keyboard that's ideal for song production. Each key can also be set to send MIDI control data, further expanding its power. Next up is the nanoPAD, featuring 12 highly responsive trigger pads, each capable of sending up to eight notes - or eight MIDI control messages - simultaneously, in addition to an X-Y touchpad with roll and flam functions for realistic drum programming. Last but not least, nanoKONTROL offers nine faders, nine knobs, 18 switches, plus a full transport section for expansive control; even a flexible note input mode to help you lay down your next big groove!
nanoPAD SPECIFICATIONS
Controllers
12 trigger pads with velocity and 4 velocity curves
X-Y pad
ROLL button
FLAM button
HOLD button
SCENE buttons (SCENE 1-4)
Memory
4 user scene memories
Connections
mini-USB
Power
USB bus power
Power Consumption
USB bus power: less than 100 mA
Others
Dimensions: 320(W) x 82(D) x 16.5(H) mm/ 12.60“(W) x 3.23“(D) x 00.65“(H)
Weight: 330g/ 0.73lbs.
Accessories: USB cable
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
Driver Size |
1.6" / 40 mm |
Driver Type |
Dynamic |
Magnet Type |
Cobalt |
Design |
Over-Ear (Circumaural) |
Earcup Style |
Closed-Back |
General
Frequency Response |
20 Hz to 20 kHz |
Sensitivity |
113.5 dB at 1 kHz |
Impedance |
32 Ohms |
Maximum Power Handling |
100 mW |
Connectivity
Audio Connector to Source |
1/8" / 3.5 mm |
Adapter (Included) |
1/4“ |
Cable
Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
|
Reviews
There are no reviews yet.