Content |
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• 2 Auto & Sound shows, 86 built-in patterns
• Runs pre-programmed shows from SD card
• 1G SD card included
• Same personality as B300
The Galactic G300 is a single 532nm green color laser. Green is the most impressive color for laser shows and because of the 300mW laser module this unit makes powerful beam shows. If you like to create a more impressive show you can combine the G300 with the Showtec B1000 (51331). Both units have the same functionality and personality which makes programming together very easy. It also has built-in laser shows and together with the master-slave function you can run an impressive laser show without any preparation. The Galactic B300 can be controlled by DMX or programmed with any laser software using the ILDA protocol. For rental solutions you can use the SD card slot to run pre-programmed shows without controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 38 Watt
Laser Color: Green 532nm
Laser Power: 300mW
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-40˚
Control Modes: 2xAuto, 2xSound,
Master/Slave, DMX,
ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D
25 Pole
Safety Features: Key switch, Interlock,
Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2,
2007-03
Dimensions: 385 x 310 x 162 mm
(excl. bracket)
Weight: 8 kg
Accessories: 2 Keys, Interlock test
connector, 1G SD card
|
Cameo D FORCE 3000 RGB
- 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
- Beam alignment without the need for servicing!
- Dust-proof aluminium casing for minimum maintenance
- 30 kpps high-speed galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precise beams with extremely low divergence for razor-sharp projections
- Interlock Out for sending the emergency switch-off signal
- Control via ILDA
- Scan Fail safety system
- Neutrik powerCON mains input and output
- Thermally activated fan for controlled operating temperature
- Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Laser sources
Laser diode
Scanner
30 kpps @ 8° ILDA
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
JB Systems Lounge Laser DMX
Der JB Systems Lounge Laser DMX ist ein Effekt-Laser, der durch eine spezielle Rastertechnologie eine große Anzahl einzelner Laserstrahlen aufteilt, die in alle Richtungen zeigen und so einen verblüffenden, raumfüllenden Effekt erzeugen. Durch die Plug and Play-Funktion werden keine teuren Steuergeräte benötigt. Der JB Systems Lounge Laser DMX kann über die DMX-Steuerung (1 oder 7 Kanäle), Sound-to-Light und Master/Slave Betrieb laufen.
JB Systems Lounge Laser DMX:
- Effekt-Laser
- Betriebsmodi: DMX-Steuerung (1 oder 7 Kanäle), Standalone (musikgesteuert oder automatisch), Master/Slave-Funktion
- Spannungsversorgung: 230 V
- max. Leistung: 128 Watt
- CW Laser grün: 40 mW/532 nm
- CW Laser rot: 150 mW/650 nm
- LED Leistung: 5 Watt/blau
- Laserschutzklasse: 3B
- EN/IEC: N60825-1:1994 + A1:2002 + A2:2002 + COTT
- Maße: 8,6 x 23,3 x 17,6 cm
- Gewicht: 1,6 kg
|
- Type : Multi Light Bar
- Number & Colors Led : 2X Rgb
- Led Power (W) : 9Watt
- Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
- Strobe : 4 X 1 Watt White Leds
- Other : 3W Red, 3W Green & 3W Blue Led for every derby
- Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
- Channels Dmx512 : 3, 5, 6, 9 or 27
- Input / Output Dmx512 : 3Pin xlr
- Power Input / Output : IEC
- Power supply (V) : 100/240 V ac, 50/60 Hz
- Consumption (W) : 48
- Dimensions (mm) : 1185 x 386 x 110
- Weight (kg) : 6.6 bar / 8.35 with case
| 1000MW RGB Multi Color DMX Laser Lights 1W Full Color Laser Beam Animation Scan DJ Laser Projector Party Stage Decor lazer Light.
|
Reviews
There are no reviews yet.