Content |
Music Blacklight
1 tube
The Music Blacklight gives an extra dimension to the standard blacklights. This Music Blacklight can be music-controlled and therefore you can create your own Blacklight-show, which dances to the music. The Music Blacklight is available in 2 versions: with one tube and with two tubes. Through a switch on the backside, two working modes can be selected: Music Function and Static. Blacklight-bulb included.
Technical Info
Power Supply: 240V/50 Hz
Power Consumption: 40W
Weight: 4,3 kg
Dimensions: 480 x 170 x 145 mm
Lamp included!
Lamp replaceable: ordercode 82487
|
- 5-way power strip with plastic housing
- Sockets are 45° rotated
- Surge protection
- With illuminated 2-pole rocker switch
- Colour: white
|
Info
Extension Cable DMX, IP65, 3 meters, with XLR 3 pin, male and female.
|
- 6-way power strip with plastic housing
- Sockets are 45° rotated
- Surge protection
- With illuminated 2-pole rocker switch
- Colour: white
| Socapex Round
Six Bar
Power: AC 230 Volt, 50 Hz
Connector: 19 pins Socapex
Cable: Silica Gel String 1,5 m
Dimensions: 2290 x 44 x 52 mm (LxWxH)
Weight: 6,4 kg
Housing: Aluminium
Colour: polished
Wiring configuration:
Zero Phase Earth
Channel1 1 2 13
Channel2 3 4 14
Channel3 5 6 15
Channel4 7 8 16
Channel5 9 10 17
Channel6 11 12 18 |
FULL-BRIDGE PWM MOTOR DRIVER
The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.
The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.
A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.
An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.
Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN
STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole
Key Features - Able to drive both windings of bipolar stepper motor
- Output current up to 750 mA each winding
- Wide voltage range: 10 V to 46 V
- Half-step, full-step and microstepping mode
- Built-in protection diodes
- Internal PWM current control
- Low output saturation voltage
- Designed for unstabilized motor supply voltage
- Internal thermal shutdown
|
Reviews
There are no reviews yet.