Content |
Drum microphone kit includes 4 drum microphones to cover all you need in performance and recording applications. Includes 1 PGA52 kick drum microphone, 2 PGA56 drum microphones, 3 PGA instrument microphones, 2 drum mounts, and 6 XLR cables.
Main Features
- 1 PGA52 kick drum microphone
- 2 PGA56 drum microphones
- 1 PGA57 instrument microphone
- 2 PGA81 instrument microphones
- 2 Drum mounts
- 6 XLR-XLR cables
- 1 carrying case
Weight:
5054 g
Height x Width x Depth:
330.2 × 579.12 × 116.84 mm
PGADRUMKIT6 Specifications
Weight:
5054 g
Height x Width x Depth:
330.2 × 579.12 × 116.84 mm
Number of included products:
6
PGA52 Specifications
Weight:
454 g
Height x Width x Depth:
108.0 × 67.0 × 67.0 mm
Frequency Response:
50 Hz – 12 kHz
Frequency Response:
Tailored
Sensitivity:
-55.00 dBV/Pa – 1.75 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
PGA57 Specifications
Weight:
280 g
Frequency Response:
70 Hz – 15 kHz
Frequency Response:
Tailored
Sensitivity:
-56.50 dBV/Pa – 1.50 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
PGA81 Specifications
Weight:
186 g
Frequency Response:
40 Hz – 18 kHz
Frequency Response:
Flat
Sensitivity:
-48.50 dBV/Pa – 3.80 mV/Pa
Equivalent Selfnoise:
20 dB(A)
Sound Pressure:
129.5 dB SPL
Transducer Type:
Condenser
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Requires Phantom Power:
48 VDC
Cartridge:
Fixed
PGA56 Specifications
Weight:
287 g
Frequency Response:
50 Hz – 15 kHz
Frequency Response:
Tailored
Sensitivity:
-57.00 dBV/Pa – 1.45 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
|
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
|
A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.
Other features include:
- Mew A98D flexible drum mount
- SPL handling to 160dB
- frequency response of 20 to 20,000Hz and included preamplifier
- shock mount and windscreen
|
Audio Frequency Response 20 Hz - 10,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 150 Ω
Mic Type Instrumental
Open Circuit Voltage 0.63 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Shipping Weight 23.7 oz (672 g)
Wired/Wireless Wired
Weight Net 12.84 oz (364 g)
|
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
|
Audio Frequency Response 50 Hz - 16,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 600 Ω
Mic Type Instrumental
Open Circuit Voltage 2.2 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Wired/Wireless Wired
Weight Net 8.32 oz (236 g)
|
Reviews
There are no reviews yet.