| Content |
The UR5 is a premium portable wireless receiver component, designed to provide Shure UHF-R®-class technology, performance, and quality for professional broadcast and media production applications. Featuring wide-band frequency tuning, hands-on navigation, rechargeability, and a variety of mounting options, the UR5 is the clear choice for wireless portability.
RF Carrier Range
470–952 MHz (varies by region)
Modulation
FM, ±45 kHz maximum deviation
Antenna
Switching diversity
Dynamic Range
>100 dBm=, A-weighted
RF Sensitivity
-106 dBm for 12 dB SINAD,
-88 dBm for 30 dB SINAD
Image Rejection
>100 dB (typical)
Spurious Rejection (ref. 12dB SINAD)
>80 dB (typical)
Squelch Threshold
30 dB SINAD (±3 dB) normal setting
Compatible Channels
Per band: 40 (band dependent)
Tuning Bandwidth
60–72 MHz (band dependent)
Frequency Stability
±2.5 ppm
Pilot Tone
UHF-R® Mode: 32 kHz tone key pilot
Axient Mode: 28 kHz tone key pilot
Audio Frequency Response
50 Hz-16 kHz
Ultimate Quieting
>100 dBm=, A-weighted
Total Harmonic Distortion (ref. ±20 kHz deviation @1 kHz)
|
Technical Data
RF frequency range 470 ..... 870 MHz
Transmission loss 0 dB
Nominal impedance 50 Ohm
RF input BNC
Remarks Booster Feed: 12 V, 70 mA
Mains voltage 100 - 240 V
Mains frequency 50 - 60 Hz
Dimensions 19 ʼʼ, 1U
Weight approx. 3 kg |
The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.
| Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | | Power Consumption | 25 W or less | | Input/Output | 4 mixing inputs, 2 distribution outputs | | Band-Pass Frequency | 3.0 - 6.0 MHz | | Gain | 0 dB (±3 dB) | | Infrared Receiver Input | 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals) | | Distribution Output | 75 Ω, BNC jack | | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Case: ABS resin, black | | Dimensions | 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“) | | Weight | 640 g (1.41 lb) (unit only) | | Accessory | AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4 | | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together) |
|
Specifications
| Antenna Input Impedance: | 50 Ohm | | Antenna Output Impedance: | 50 Ohm | | Connectors: | TNC receptacle | | Gain: | 13 dB | | Bandwith: | 400 MHz | | Power Requirements: | DC 9 V | | Dimensions: | 35 mm x 65 mm x 75 mm |
This product is compatible with the LDWS100 series and also with the LDWS1000 series.
|
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for the Sennheiser ASP 2 passive antenna splitter.
The ASP 2 also powers up to 4 x EM100 / 300 / 500 G2 radio mic receivers and 2 x AB 2 active mast head amplifiers 240 volt A.C. input. (UK 3 pin). The ASP 2 with NT1-UK combination helps reduce Antenna and PSU requirements in a multi receiver system.
Sennheiser NT1-UK Features:
- 12 volt D.C. regulated output, centre pin polarised positive
- 1.5 amp current rating
The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for Sennheiser ASP 2 passive antenna splitter.
|
Φορτιστής μπατταριών για το IR-200M και τα IR-300M ασύρματα infrared μικρόφωνα. Για μπατταρίες τύπου NiMH. Πλήρης φόρτιση εντός 3 ωρών. |
Reviews
There are no reviews yet.