SICA Z004290C 8H 1CS WOOFER 8″ 120W

• 1\'\' Voice Coil Epotex former
• Ferrite Magnet Circuit
• 90.3 dB sensitivity
• Impedance 8 Ohm
• Diameter 20 Cm
• weight 1.5 kg

Nominal Specifications

    * Nominal Diameter 8“, 200 mm
    * Overall Diameter 8.81/8.18“, 223.8/207.9 mm
    * Bolt Circle Diameter 8.27“, 210 mm
    * Baffle Cutout Diameter 7.24“, 184 mm
    * Depth 4.59“, 116.7 mm
    * Flange and Gasket Thickness 0.42“, 10.7 mm


Electrical Specifications

    * Minimum Impedance 6.5 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 150 W
    * Maximum Power Handling**** 300 W
    * Sensitivity (1W/1m) 94 dB
    * Frequency Range 80 - 6300 Hz
    * Voice Coil Diameter 2“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.53“, 13.5 mm
    * Magnetic Gap Depth 0.31“, 8 mm
    * Flux Density 1 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 76 Hz
    * DC Resistance (Re) 5.8 Ohm
    * BL Product (BL) 9.86 N/A
    * Diaphragm Mass inc. Airload (Mms) 20.9 grams
    * Mechanical Compliance of Suspension (Cms) 0.2 mm/N
    * Rms 2.11 Kg/s
    * Electromagnetic Q (Qes) 0.59
    * Mechanical Q (Qms) 4.72
    * Total Q (Qts) 0.53
    * Compliance Equivalent Volume (Vas) 0.42 ft³, 11.9 dm³
    * Surface Area of Cone (Sd) 31“², 200 cm²
    * Maximum Linear Excursion (Xmax)* 5.42 mm
    * Xdamage** 12 mm
    * Coil Inductance (Le) 0.55 mH
    * Diaphragm mass (Mmd) 19.4 g
    * Eta Zero 0.85 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power

• 96 dB Sensitivity 1 W / 1 m
• 200 W Power Handling
• 2" Aluminium Sandwich Voice Coil
• Double treated Cone for Water Protection
• Triple Aluminum demodulating Rings for ultra low Distortion
• Optimal for compact 2-way Systems

• Nominal Basket Diameter 8“, 203.2 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 125 W / Music Program 250 W
• Resonance 73 Hz
• Usable Frequency Range 58 Hz - 5 kHz
• Sensitivity 94
• Magnet Weight 20 oz.
• Gap Height 0.25“, 6.35 mm
• Voice Coil Diameter 1.5“, 38.1 mm

• Resonant Frequency (fs) 73 Hz
• DC Resistance (Re) 5.3
• Coil Inductance (Le) 0.44 mH
• Mechanical Q (Qms) 4.6
• Electromagnetic Q (Qes) 0.68
• Total Q (Qts) 0.59
• Compliance Equivalent Volume (Vas) 17.7 liters / 0.6 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 67 cc
• Mechanical Compliance of Suspension (Cms) 0.28 mm/N
• BL Product (BL) 7.8 T-M
• Diaphragm Mass inc. Airload (Mms) 17 grams
• Efficiency Bandwidth Product (EBP) 107
• Maximum Linear Excursion (Xmax) 3.2 mm
• Surface Area of Cone (Sd) 210.0 cm²
• Maximum Mechanical Limit (Xlim) 7.1 mm

• Recommended Enclosure Volume Sealed 5-7 liters / 0.18-0.25 cu. ft. Vented 16.7-25.5 liters / 0.59-0.90 cu. ft.
• Overall Diameter 8.24“, 209.2 mm
• Baffle Hole Diameter 7.13“, 181 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.22“, 5.5 mm
• Mounting Holes B.C.D. 7.75“, 196.9 mm
• Depth 3.25“, 83 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap

• 94 dB sensitivity 1 W / 1 m
• 250 W Power handling
• 2" voice coil
• Double treated cone for water protection
• Neodymium magnet system
• Tripie aluminum demodulating rings for ultra low distortion
• Optimal for compact 2-way systems
• Light weight carbon fibre diaphragm

Product type Loudspeaker Chassis