SONTRONICS DM-1S Pencil Condenser for tom and snare drum

167.40 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: DM-1S Category:
The DM-1S is a small pencil condenser designed specifically for snare drum. It is a companion mic to the DM-1T tom microphone, from which it differs only in voicing. Both mics are part of Sontronics application-specific microphone series, which also includes the DM-1B and the DM-1B kick-drum mic. The DM-1T and DM-1S are physically identical. […]

 

Read more

The DM-1S is a small pencil condenser designed specifically for snare drum. It is a companion mic to the DM-1T tom microphone, from which it differs only in voicing.

Both mics are part of Sontronics application-specific microphone series, which also includes the DM-1B and the DM-1B kick-drum mic.

The DM-1T and DM-1S are physically identical. They are compact (length approximately 10cm) to facilitate placement above toms and snare without being in the way of cymbals.

The DM-1T tom mic and DM-1S snare mic are both end-address, with a 24mm true condenser capsule. Both produce a Cardioid pickup pattern.

Specifications
Pickup Patterns     Pads & Filters
Cardioid (8 mV/Pa; 30 – 20,000 Hz)
   

    Pad: -10dB (Via Switch)

Capsule Dimensions     Impedance     SPL/Noise
Capsule diameter: 24mm
    200 Ohms (Low)     Max SPL: 135 dB
Self-noise: 14.0 dB(A)
Weight     Length     Max Diameter     Interface(s)
n/a     100mm (3.94”)     n/a    

    3-pin XLR male (1)

Power Specifications

    Requires phantom power
    Phantom voltage: 48±4v

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “SONTRONICS DM-1S Pencil Condenser for tom and snare drum”

Your email address will not be published. Required fields are marked *

Quick Comparison

SONTRONICS DM-1S Pencil Condenser for tom and snare drum removeSENNHEISER E-914 HIGH-GRADE CONDENSER MICROPHONE removeSENNHEISER E-865S Condenser Microphone with ON/OFF Switch removeSENNHEISER E-614 SUPERCARDIOID CONDENSER MICROPHONE removeSHURE SM-81LC - Cardioid Condenser Microphone removeSENNHEISER ME-64 Back-electret Microphone Capsule remove
NameSONTRONICS DM-1S Pencil Condenser for tom and snare drum removeSENNHEISER E-914 HIGH-GRADE CONDENSER MICROPHONE removeSENNHEISER E-865S Condenser Microphone with ON/OFF Switch removeSENNHEISER E-614 SUPERCARDIOID CONDENSER MICROPHONE removeSHURE SM-81LC - Cardioid Condenser Microphone removeSENNHEISER ME-64 Back-electret Microphone Capsule remove
Image
SKUDM-1SH10SE00106H10SE00072H10SE00091SM81-LCH10SE00010
Rating
Price 167.40 incl. GR VAT 379.00 incl. GR VAT 239.00 incl. GR VAT 189.00 incl. GR VAT 345.00 incl. GR VAT 175.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The DM-1S is a small pencil condenser designed specifically for snare drum. It is a companion mic to the DM-1T tom microphone, from which it differs only in voicing.

Both mics are part of Sontronics application-specific microphone series, which also includes the DM-1B and the DM-1B kick-drum mic.

The DM-1T and DM-1S are physically identical. They are compact (length approximately 10cm) to facilitate placement above toms and snare without being in the way of cymbals.

The DM-1T tom mic and DM-1S snare mic are both end-address, with a 24mm true condenser capsule. Both produce a Cardioid pickup pattern.

Specifications
Pickup Patterns     Pads & Filters
Cardioid (8 mV/Pa; 30 - 20,000 Hz)
   

    Pad: -10dB (Via Switch)

Capsule Dimensions     Impedance     SPL/Noise
Capsule diameter: 24mm
    200 Ohms (Low)     Max SPL: 135 dB
Self-noise: 14.0 dB(A)
Weight     Length     Max Diameter     Interface(s)
n/a     100mm (3.94'')     n/a    

    3-pin XLR male (1)

Power Specifications

    Requires phantom power
    Phantom voltage: 48±4v


The e 914  is a high grade condenser microphone  for very demanding applications.
Its outstanding sound properties qualify the e 914 for highly sophisticated tasks.
The e 914 is a perfect microphone for ambitious recordings and live performances.
Its main areas of application are acoustic guitars, cymbals, percussion, overhead,
orchestras, grand pianos etc . 
 
Features
Exceptionally lively, clear sound
Three-position sensitivity switch
Three-position bass roll-off/cut-off switch
Very high sound pressure handling capability
Exchangeable microphone capsule
Delivery Includes
e 914 microphone
Microphone clamp
Windscreen
Pouch
User manual

Technical Data
Pick-up pattern  cardioid 
Frequency response  20...20 000 Hz 
Sensitivity in free field, no load (1kHz)  7 mV/Pa 
Equivalent noise level  19 dB(A) 
Attenuation  0, -10, -20 dB 
Max. Sound pressure level (aktiv)  137, 147, 157 dB 
Nominal impedance  100 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  24 x 157 mm 
Weight  198 g 

The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.

  • Pick-up pattern : super cardioid
  • Sensitivity in free field, no load : (1kHz) 3 mV/Pa
  • Max. Sound pressure level (aktiv) : 150 dB
  • Nominal impedance : 200 Ohm
  • Min. terminating impedance : 1000 Ohm
  • Dimensions : d 47 x 193 mm
  • Weight : w/o cable 311 g
  • Frequency response (microphone) : 40.....20000 Hz
  • Phantom powering : 12 - 48 V

The super-cardioid e 614 is a permantly polarized condenser microphone
designed for demanding applications which require a wide frequency response,
high SPL, fast transient response and a compact design.  With its frequency
response of 40 Hz to 20 kHz, the e 614 is able to capture the full sound of the
instrument, while its super-cardioid pick-up pattern isolates the microphone
from other on-stage signals. 
An excellent microphone for percussion instruments, the e 614 is also an ideal
choice for woodwind and string instruments.  Its excellent acoustic properties
also make it a valuable tool for home recording.

Features
Rugged design Effective rejection of incidental rear noise Excellent directivity
across the whole frequency range Full, natural sound High maximum sound
pressure level
Wide frequency response
Delivery Includes
Microphone pouch
Microphone clip MZQ 100

Technical Data
Frequency response  40 Hz ... 20 kHz 
Transducer principle  permanently polarized condenser 
Pick-up pattern  supercardioid 
Sensitivity in free field, no load (1kHz)  3 mV/Pa = - 50dB (0 dB = 1 V/Pa) 
Nominal impedance  50 Ohm 
Min. terminating impedance  1 kOhm 
Maximum sound pressure level (passiv)  139 dB/SPL 
Equivalent noise level  24 dB(A) 
Equivalent noise level weighted as per CCIR 468-3  35 dB 
Dimensions  ? 20mm, L = 100mm 
Weight w/o cable  93 g 

 Cardioid Condenser with 10dB Attenuator and 3 Position Low-Cut Filter

One of the world's great studio microphones, the SM81 provides precise, detailed sound reproduction, is excellent for studio recording, and is rugged enough for live sound reinforcement.

  • A standard for acoustic instruments, including guitar and cymbals
  • Selectable, low-frequency response -- either flat, 6dB/octave roll-off, or 18 dB/octave roll-off
  • Built-in, switchable 10 dB attenuator for use in high SPL situations
  • Phantom power only
  • Windscreen included
  • Low noise and high output clipping
  • Cardioid condenser
  • Frequency response: 20 to 20,000 Hz

Back-electret Microphone Capsule suitable for K6 and K6P Powering Modules. The ME 64 is a cardioid microphone capsule designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matte black, anodized, scratch-resistant finish.
 
Features

 Excellent directivity across whole frequency range 
 Very good feedback rejection 
 Effective rejection of incidental rear noise 
 High speech clarity 
 High maximum sound pressure level 
 Wide frequency range 
 Integrated pop filter
 
 

Weight2.00 kg0.19 kg0.31 kg0.10 kg0.60 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 0.19 kg
Weight 0.31 kg
Weight 0.10 kg
Weight 0.60 kg
Weight 0.30 kg