Content |
- Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad.
- Dynamic range greater than 114 dB (in 24-bit operation).
- Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics.
- Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections).
- Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources.
- High-output headphone amplifier can drive a wide range of headphones.
- Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs.
- Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephon
- Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers.
- Bus powering via USB for convenient, single-cable connection to the computer.
- In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
- Hardware loop-through for test and measurement to send computer audio directly back to an input.
- High-strength extruded aluminum chassis.
- Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device.
- Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.
|
- Hybrid FireWire/USB2 connectivity — connect to your computer via either bus-powered FireWire or hi-speed USB2.
- CueMix FX™ — flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
- 10 inputs / 14 outputs — there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
- Classic Reverb™ — provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
- Two forms of compression — a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler™, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
- Modeled EQ — provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
- CueMix FX cross-platform mixing software — attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
- Front-panel control — access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
- “Reverb return" stream — allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
- Stand-alone operation — program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig — no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
- Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear — with no latency.
- Two combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
- Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
- Precision Digital Trim™ — Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
- Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
- Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
- Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
- Expandable — add additional interfaces for more I/O as your needs grow.
- Separate TRS main outs with front panel volume control.
- Stereo 24-bit 96kHz S/PDIF in/out.
- Includes drivers for Mac & PC, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
- 100% compatible with all host-based effects processing in today's popular audio programs.
- Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
- Plug-and-play operation with your Mac or PC via FireWire or USB2.
- Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available.
- Front panel headphone jack with volume control.
- Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.
- Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high.
|
UA-20: Audio Capture USB Audio/MIDI Interface
Features
The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.
- Audio and MIDI in a compact unit.
- Fully equipped with I/O jacks.
- Great tool for creating music.
- Edirol's FPT Technology.
Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.
| Portable 10-in/10-out compact, mobile FireWire audio at home or on the road
The FA-101 has the highest specs available to support your most demanding applications. You get 24-bit, 192kHz simultaneous recording and playback in a compact 1U half-rack unit, with all the headroom you need.
Supports up to 24 bit, 192 kHz
Compatible with Mac OS X standard driver
Two independent, on board mic pre-amps
Capable of full duplex recording and playback on 10 independent channels
Bus powered and durable metal construction for mobile applications
Lots of ins and outs to support a wide range of recording and gigging applications
The FA-101 is a feature-packed 10x10 audio interface that can handle a full 10 channels of input/output at 24-bit/96kHz. Record and monitor all 10 channels simultaneously in full duplex. Phenomenal audio power for the studio musician! In addition, the FA-101 offers 6-channel recording and playback at 24-bit/192kHz for performance at DVD-A quality.
* 10x10 24-bit/96kHz audio performance
* 6x6 24-bit/192kHz audio performance
* Firewire bus-powered
* Direct monitoring
* Low-latency driver support
* Native Support in Mac OS X (10.3.4 or later)
* 2x phantom-powered mic preamps
* 8x8 balanced analog I/O
* S/PDIF optical I/O
* MIDI I/O |
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One FireWire port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One FireWire port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers
Mbox Pro Hardware
Pro Tools Mbox Pro
Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* FireWire connection
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 192 kHz sample rates*
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Connect up to three pairs of monitors or do 5.1 surround mixing**
* Hardware configuration:
o 8 x 8 simultaneous channels of I/O
o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
o 4 1/4" TRS line inputs
o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
o 6 1/4" TRS balanced line outputs
o 2 discrete 1/4” stereo headphone outputs with separate volume controls
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Word clock I/O
o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
o Dedicated monitor volume knob
* Up to 96 kHz sample rates supported with Pro Tools LE software.
** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
|
The UA-1G is a compact 1 x 1 USB Audio Interface that offers excellent-quality sound via multiple connection options and a simple, user-friendly design.
- Stereo input and output at 24-bit/96kHz audio quality
- High-end A/D and D/A converters for accurate recording and playback
- Large Input Level knob for easy control while recording
- 1/4" jack with Hi-Z option for recording electric guitar or bass
- Electret condenser mic input
- RCA phono type and optical-digital audio I/O
- Headphone output
- USB powered – no AC adapter required
- SONAR LE for music recording, editing, and publishing on PC
- Low-latency ASIO 2.0 (PC); WDM (Windows Vista, Windows XP) and Core Audio (Mac OS X) support
Number of Audio Record/Playback Channels | Record: 1 pair of stereo
Play: 1 pair of stereo
REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting)
REC SOURCE switch = DIGITAL: Recording only |
---|
Signal Processing | PC interface: 24 bits
AD/DA Conversion: 24 bits (linear)
* ADVANCE DRIVER switch = OFF: 16 bits |
---|
Sampling Frequency | Digital output: 32/44.1/48/96 kHz
Digital input: 32/44.1/48/96 kHz
AD/DA Conversion: 32/44.1/48/96 kHz
* ADVANCE DRIVER switch = OFF: 32/44.1/48 kHz
|
---|
Nominal Input Level | Line input jacks: -10 to +4 dBu
Guiter input jakcs: -30 to -16dBu
Mic input jack: -40 to -26 dBu
|
---|
Nominal Output Level | Line output jacks: -10 dBu |
---|
Interface | USB Digital input (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector.
Digital output (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
* conforms to IEC60958 consumer format. |
---|
Controllers | ADVANCED DRIVER Switch
Guiter/Mic Switch
INPUT VOLUME knob
PHONES VOLUME Dial
SAMPLE RATE Switch
96kHz MODE Switch
INPUT MONITOR Switch
REC SOURCE Switch |
---|
Connectors | USB Connector (B type)
Line Input jacks (L, R) (RCA phono type)
Line Output jacks (L, R) (RCA phono type)
Guiter/Mic Input jack: (1/4 inch phone type)
Mic Input jack (Plug-in powered miniature phone type)
Digital Intput connector (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
Headphones jack (Stereo miniature phone type)
Digital Output connector (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector. |
---|
Power Supply | Supplied from the computer |
---|
Current Draw | 200 mA |
---|
Accessories | Ownerʼs Manual, UA-1G CD-ROM, SONAR LE CD-ROM | Size and Weight |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
---|
|
Reviews
There are no reviews yet.