Content |
1200 W continuous program power capacity |
|
76 mm (3 in) copper voice coil |
|
40 – 2000 Hz response |
|
100.5 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Neodymium ring magnet allows a very high force factor and linear excursion |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
|
Neodymium coaxial speaker with 15" woofer, 8Ω, 400W Nominal, 800W continuous, 99dB (1W/1m) and horn 80W Nominal, 160W continuous, 105dB (1W/1m), response frequency 40-18000Hz, dispersion 80 degrees, 5,6Kg.
800 W continuous program power capacity |
|
80° nominal coverage |
|
40 – 18000 Hz response |
|
99 dB sensitivity |
|
Single Neodymium magnet assembly
Nominal Diameter |
380 mm (15 in) |
Nominal Impedance |
8 ohm |
Minimum Impedance |
6.0 ohm (LF) 8.0 ohm (HF) |
Frequency Range |
40 - 18000 Hz |
Dispersion Angle |
80° |
LF Unit |
|
Sensitivity (1W/1m) |
99 dB |
Nominal Power Handling |
400 W |
Continuous Power Handling |
800 W |
Voice Coil Diameter |
76 mm (3 in) |
Winding Material |
Copper |
HF Unit |
|
Sensitivity (1W/1m) |
105 dB |
Nominal Power Handling |
80 W |
Continuous Power Handling |
160 W |
Voice Coil Diameter |
75 mm (3 in) |
Winding Material |
Aluminium |
Diaphragm Material |
Polyester/Titanium |
Recom. Crossover |
1.2 kHz |
Overall Diameter |
393 mm (15.5 in) |
Bolt Circle Diameter |
374 mm (14.7 in) |
Baffle Cutout Diameter |
353 mm (13.9 in) |
Depth |
198 mm (7.8 in) |
Flange and Gasket Thickness |
16 mm (5/8 in) |
Net Weight |
5.6 kg (12.3 lb) |
Shipping Weight |
7.0 kg (15.4 lb) |
Shipping Box |
450x450x290 mm (17.7x17.7x11.4 in) |
|
|
1400 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
35 – 1000 Hz response |
|
94.5 dB sensitivity |
|
Double silicone spider with optimized compliance |
| | KAPPA-15A American Standard Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 450 W / Music Program 900 W
- Resonance 33 Hz
- Usable Frequency Range 52 Hz - 2.3 kHz
- Sensitivity 100.5
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 33 Hz
- DC Resistance (Re) 5.22
- Coil Inductance (Le) 1.05 mH
- Mechanical Q (Qms) 8.90
- Electromagnetic Q (Qes) 0.33
- Total Q (Qts) 0.32
- Compliance Equivalent Volume (Vas) 321.3 liters / 11.35 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 343 cc
- Mechanical Compliance of Suspension (Cms) 0.31 mm/N
- BL Product (BL) 15.7 T-M
- Diaphragm Mass inc. Airload (Mms) 76 grams
- Efficiency Bandwidth Product (EBP) 98
- Maximum Linear Excursion (Xmax) 4.0 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 11.6 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 45-113 liters/1.6-4 cu.ft.
- Overall Diameter 15.16“, 384.9 mm
- Baffle Hole Diameter 13.77“, 349.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.13“, 156 mm
MATERIALS of Construction
- Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
|
Reviews
There are no reviews yet.