KRK RP-6 G2 POWERED REFERENCE STUDIO MONITOR

Discontinued

141.13 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
 PRICE PER UNIT Technical Specifications Speaker: Woofer: 6′ Glass Aramid Composite Woofer Tweeter: 1” Neodimium Soft Dome Tweeter με Ferro Fluid Input: XLR (3-pin), RCA & 1/4′ TRS – 10k Ohm, Balanced / Unbalanced Amplifier 100 Watt Dynamic Power Bi-amp, 24 dB Octave Filters Frequency Response: 49Hz – 20kHz Magnetic Shield: Yes Dimensions: (H x W […]

 

Read more

 PRICE PER UNIT

Technical Specifications

  • Speaker: Woofer: 6′ Glass Aramid Composite Woofer

  • Tweeter: 1” Neodimium Soft Dome Tweeter με Ferro Fluid

  • Input: XLR (3-pin), RCA & 1/4′ TRS – 10k Ohm, Balanced / Unbalanced

  • Amplifier 100 Watt Dynamic Power Bi-amp, 24 dB Octave Filters

  • Frequency Response: 49Hz – 20kHz

  • Magnetic Shield: Yes

  • Dimensions: (H x W x D) 32.1cm x 22.5cm x 29 cm

 

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “KRK RP-6 G2 POWERED REFERENCE STUDIO MONITOR”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK RP-6 G2 POWERED REFERENCE STUDIO MONITOR removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeM-AUDIO BX8 D3 MONITOR SPEAKER removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR remove
NameKRK RP-6 G2 POWERED REFERENCE STUDIO MONITOR removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeM-AUDIO BX8 D3 MONITOR SPEAKER removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR remove
Image
SKURP-6 G2MYTHO8Twin6 BeMIEM000281E005760040050
Rating
Price 141.13 incl. GR VAT 976.50 incl. GR VAT1,675.00 incl. GR VAT 182.99 incl. GR VAT 221.00 incl. GR VAT 155.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 PRICE PER UNIT

Technical Specifications
  • Speaker: Woofer: 6' Glass Aramid Composite Woofer
  • Tweeter: 1'' Neodimium Soft Dome Tweeter με Ferro Fluid
  • Input: XLR (3-pin), RCA & 1/4' TRS - 10k Ohm, Balanced / Unbalanced
  • Amplifier 100 Watt Dynamic Power Bi-amp, 24 dB Octave Filters
  • Frequency Response: 49Hz - 20kHz
  • Magnetic Shield: Yes
  • Dimensions: (H x W x D) 32.1cm x 22.5cm x 29 cm

 

MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

Acoustical Specifications
Frequency Response -3 dB:35 Hz÷ 20 kHz
Max SPL:116 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:8" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1800 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:430/17 mm/inch 
Width:310/12.2 mm/inch 
Depth:300/11.8 mm/inch 
Net Weight:16.150/35.60 Kg/Lbs

 

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

M-Audio BX8 D3 Features:
  • 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
  • Bi-amplified design delivers a sound that's both powerful and precise
  • Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
  • Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
  • Acoustic Space Control tailors your monitor to your mix space
  • Volume control for dialing in the perfect playback level
  • Balanced combo input allows for flexible installation
  • Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
  • Frequency Range: 37Hz – 22kHz
  • Crossover: 2.0kHz
  • Maximum Peak Input Level: -2dBU
  • Input Types: Balanced 20kO XLR, and TRS
  • Unbalanced: 10kO TS
  • Input Sensitivity: -12dBU
  • HF Driver Size: 31.8 mm (1.25“)
  • LF Driver Size: 203 mm (8“)
  • Amplifier Power: 150W Class A/B
  • HF Driver Power Amp: 70W
  • LF Driver Power Amp: 80W
  • Port: Rear internally flared
  • Controls: Yes
  • Magnetic Shielding: Yes
  • AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
  • Enclosure Construction: MDF
  • Enclosure Finish: Black PVC
  • Baffle Construction: Injection-molded ABS
  • Baffle Finish: Matte black with Soft-touch
  • Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
  • Weight: 10.5 kgs (23.1 lbs)
  • Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
  • Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
  • Shipping Weight: 12.8kgs (28.22lbs)
  • Configuration: 2-Way bi-amp
  • System Type: Active Monitor
  • Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
  • Power Consumption: 150W
  • Shape: Bass-reflex
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany

Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

Weight4.00 kg20.00 kg14.00 kg13.00 kg7.50 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 20.00 kg
Weight 14.00 kg
Weight 13.00 kg
Weight 7.50 kg
Weight 3.50 kg