KRK 10-S2 Active Studio Subwoofer ( Piece )

For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again.

KRK's KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4“-8" studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the ROKIT and VXT monitors. The front-firing bass port and KRK's trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.

Dynaudio 9S, Active Subwoofer 24 cm (9.5“) Woofer, 300 Watt Class-D Amp, Frequency Range: 22 Hz - 175 kHz (+/- 3dB), 37 mm front baffle, Master/Slave Function, adjustable Lowpass Filter, Connections: XLR, SAT output with defeat-able highpass filter, Auto On/Off Function.

Dimensions: 266 x 320 x 276 mm, Weight: 10.5 kg

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

• 8' bass-reflex powered subwoofer delivers low frequencies down to 22Hz
• 22Hz - 150Hz frequency response
• High-power 150W amplifier exclusively designed for low frequencies
• LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
• PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
• XLR and TRS phone for outputs and XLR for L and R and EXT SUB

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

• 10-inch glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port
  

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert and ground-lift switch
  

• 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated, gravity-calibrated rubber feet for stable placement
  

• Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼" TRS outputs 
• XLR subwoofer output for connecting a second T10

Genelec 7060B Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems.

With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.