Content |
- Unique lighting fixture with quick sweeping narrow beams combined with an 8-Zone LED chase
- 8x 8-Watt RGBW LEDs
- 4-Button DMX LED Display
- 3 Operational modes: DMX controller, Master/Slave & Sound Active
- 4 DMX Channel modes (1, 6, 35 or 39 channels)
- DMX-512 Protocol
- Electronic Dimming: 0 - 100%
- Includes exciting sound activate built-in programs
- LED pulse & strobe effect
- 270 degree tilt from smooth Stepper Motors
- Extremely Long Life (50,000 hr. rated)
- Beam angle: 3.4-degrees
- Runs extremely cool! - NO Duty Cycles! – Run all night!
- Includes mounting brackets to mount on a wall or set on the ground
- Safety hook on rear panel
- Very low power consumption - connect more units in a single circuit
- IEC AC IN/OUT on rear to daisy chain power (up to 4 Sweeper Beam Quad LED’s @ 120V and 7 Sweeper Beam Quad LED’s @ 230V )
- Compatible with ADJ UC3 Series easy-to-use controllers (sold Separately)
- Power Consumption: 81W maximum
- Multi-voltage operation: AC 100-240V 50/60Hz- IEC socket
- Power cable length: 1.5 meter (IEC)
- Dimensions (LxWxH): 38.5”x 3”x 5.25” / 973 x 73 x 132mm
- Weight: 14 lbs. / 6.3 kg.
- ETL Approved
|
The Cameo PixBar 650C PRO is a 53° beam width professional LED bar with 8 ultra bright 30 watt COB-LEDs for solid colour mixing with seamless transition. Highly efficient convection cooling and a 3,600 Hz refresh rate ensure absolutely noiseless operation and flicker free performance.
The PixBar 650C PRO is fully RDM compatible for bi-directional communication with a dedicated controller providing addressing, configuration and status reporting of the fixture. It is capable of standard DMX control in 5 modes and standalone, master or slave operation. The PixBar 450C PRO also features autorun software, a built-in microphone for sound control and a backlit display with Mode, Enter, Up and Down keys for manual control.
In addition to rich RGB colours and macros calibrated to the LEE filters standard the PixBar 650C PRO provides colour temperature correction, 4 selectable dimming curves and single pixel control for impressive chase effects.
The fixture's rugged aluminium enclosure features 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and an adjustable stand that doubles as mounting bracket.
- Product number: CLPIXBAR650CPRO
- Product type:LED BAR
- Type: Washer
- Colour spectrum: RGB
- Number of LEDs: 8
- LED type: 30W COB
- Refresh rate: 3000Hz
- Dispersion: 53°
- DMX input: XLR 3-pin male, XLR 5-pin male
- DMX output: XLR 3-pin female, XLR 5-pin female
- DMX mode: 2-channel, 3-channel, 3-channel, 9-channel, 30-channel
- DMX functions: Pixel Control, 13 Auto-Modes, Sound Mode, Colour Macros, Dimmer, Strobe, Colour temperature correction
- Standalone modes: Auto Run, 14 Auto-Modes, Sound Mode, Static,Strobe
- Controls: Mode,Enter,Up,Down
- Indicators: LC-Display
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 250W
- Power connector: Neutrik powerCON
- Housing material: Aluminium
- Cabinet colour: black
- Cooling: Convection
- Illuminance: 3770lx 1m
- Dimensions without mounting bracket
- Width: 880mm
- Height: 110mm
- Depth: 130mm
- Dimensions of mounting brackets (incl. rubber feet) 495 x 140 x 100 mm
|
Power supply: |
100-240 V AC, 50/60 Hz |
IP classification: |
IP20 |
Protection class: |
Protection class I |
Power connection: |
Battery/battery pack
Mains input via P-Con (blue), mounting version power supply cord with safety plug (provided) |
Battery pack type: |
1 x lithium ion 11,1 V, 10400 mAh, 115,44 Wh |
Battery pack: |
Battery operation up to 13h depending on program used
Recharging time 4h |
Lamp type: |
LED lamp |
LED: |
30 x 0,25 W SMD 5050 4in1 QCL RGBW (homogenous color mix)
6 x 8 W high-power 4in1 QCL RGBW (homogenous color mix) |
DMX channels: |
3; 7; 8; 9; 11 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; DMX; QuickDMX; IR remote control; Sound to light via Microphone; Light´J; LED PC-Control 512; Master/slave function; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3 |
Beam angle: |
15° |
Beam angle (1/2 peak): |
15° |
Beam angle (1/10 peak): |
30° |
Housing color: |
Black |
Display type: |
Multicolor LCD display |
Carrier frequency: |
2,4 GHz |
Theft protection: |
KENSINGTON LOCK |
Dimensions: |
Length: 41,1 cm
Depth: 9,5 cm
Height: 10,5 cm |
Weight: |
2,80 kg |
Noise classification: |
Class 0 (no noise at all) |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2032 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
Item no. 51930398
LED bar (110 cm) with 12 x 4 watt 4in1 LED (RGBW)
- 12 powerful LEDs 4 W high-power 4in1 QCL RGBW (homogenous color mix)
- Color change adjustable; Dimmer electronic; color blend stepless
- Strobe effect
- The device is cooled by passive convection cooling
- Control via stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional)
- Flicker-free
- With a beam angle of 17°
- With Mounting bracket
- 4 digit 7-segment LED display
- Preprogrammed in LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain; Light´J
- Silent operation
- Mains input and output for power linking up to 8 units
Package contents
- 1 x light effect, 1 x user manual, 1 x power cord, 2 x mounting bracket, 2 x washer, 2 x knurled screw
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
24 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Power output: |
1 x IEC connector (F) mounting version |
Lamp type: |
LED lamp |
LED: |
12 x 4 W high-power 4in1 QCL RGBW (homogenous color mix) |
Flash rate: |
0 - 20 Hz |
DMX channels: |
2; 4; 5; 6; 9 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); W-DMX by wireless solution (optional); CRMX by LumenRadio (optional); LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE; Light Captain |
Beam angle: |
17° |
Beam angle (1/2 peak): |
17° |
Beam angle (1/10 peak): |
33° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
4 digits 7-segment LED display |
Dimensions: |
Length: 1,085 m
Depth: 6,5 cm
Height: 10 cm |
Weight: |
2,85 kg |
Noise classification: |
Class 0 (no noise at all) |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
Cable length: |
Approx. 1,1 m |
Mounting bracket |
Pieces: |
2 Stk |
Diameter mounting holes: |
1 x Ø20mm; 1 x Ø11mm; 1 x Ø8mm; 2 x Ø7mm |
Material: |
Metal, 2 mm |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
Ecolabel [3,46 MB]
User's manual [3,16 MB]
|
|
| 12 x 12 W RGBWA+UV LED Bar black
The Cameo PixBar 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
SPECIFICATIONS:
- Item Number: CLPIXBAR600PRO
- Product Type: LED BAR
- Type: washer
- Colour Spectrum: RGBWA+UV
- Number of LEDs: 12
- LED Type: 12 W
- Refresh Rate: 3,600 Hz
- Beam Angle: 23° at 600 lx, 41° at 1120lx
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 2-channel, 6-channel 1, 6-channel 2, 8-channel, 12-channel, 74-channel, 78-channel
- DMX Functions: Single Pixel Control, 14 Auto modes, Sound Mode, Colour macros, Dimmer, Strobe
- Standalone modes: 14 Auto modes, Sound Mode, Static, Strobe
- Controls: Enter, Value Up, Value Down, Mode
- Indicators: LC display
- Power Supply: 110 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 160 W
- Power Connector: Neutrik PowerCon
- Housing Material: aluminium/metal
- Housing Colour: black
- Cooling System: convection
- Illumination: single LED 1190 lx 1m
- Dimensions without mounting bracket:
- Width: 900 mm
- Height: 120 mm
- Length: 75 mm
|
|
Power supply: |
12 V DC |
Power consumption: |
12 W |
IP classification: |
IP20 |
Protection class: |
Protection class III |
Power connection: |
Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided) |
LED: |
32 x SMD 5050 3in1 TCL RGB |
Flash rate: |
0 - 30 Hz |
Control: |
IR remote control |
Beam angle: |
300° |
Beam angle (1/2 peak): |
300° multicolor |
Housing color: |
White; semi-transparent |
Dimensions: |
Width: 20 cm
Height: 1 m
Diameter: Ø 5 cm |
Weight: |
370 g |
|
Reviews
There are no reviews yet.