Content |
- Condenser microphone
- Cardioid
- 50 Hz – 16 kHz
- Impedance 200 Ω
- Sensitivity -48 dbV/pa
- Without switch
- Incl. mount and plastic box
- Very clean sound
- Ideal for vocal and acoustic guitar miking
- Max. SPL 136 dB
- Requires phantompower between 9 V -52 V
- Dimensions: 46 mm x 175 mm
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
|
The RSM-120 goes strong due to its powerful sound characteristics: brilliant highs and treble, powerfull bass; all in all remarkable volume characteristics. And thanks to the marginal sensitivity playback is very balanced.
features:
* Dynamic cardiode microphone with switch
* Integrated XLR connection
technical data:
* Impedance:
* Frequency range: 60 Hz - 25 kHz
* Sensitivity: -52 dB +/-3 dB
* Incl. 5 m cable and a bag for easy transport |
The E-835S is a cardioid lead vocal stage microphone specially designed to perform under pressure.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 2,7 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 48 x 180 mm
Weight : w/o cable 330 g
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
80 Hz |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Signal-to-Noise Ratio |
76 dB A-Weighted |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
| The P 3 S microphone is ideal for backing vocals, guitar, wind instruments and many other applications. It has a metal case and wire mesh grill to ensure exceptional ruggedness.
Key Features:
- Rugged performance microphone designed for backing vocals and instruments
- Rugged wire mesh cap with internal windscreen
- Die-cast metal body
- Complete with stand adapter and zip bag
- On/Off switch
Specifications:
- Polar pattern Cardioid
- Frequency range 40 to 18,000 Hz
- Sensitivity 2.5mV/Pa
- Max. SPL 144 dB SPL
- Recommended load impedance >=2,000 ohms
|
Reviews
There are no reviews yet.