User’s manual [3,30 MB] Production Partner 04/2014 DDQ 15 2-Way Touring Class Powered Loudspeaker with DSP The LD Systems DDQ 15 is an ultra high efficiency 2-way biamped loudspeaker for FOH and monitor applications, delay lines, portable PA systems and fixed installations delivering superior touring class performance. A 24-bit/48 kHz custom Sharc DSP provides volume control, […]
DDQ 15 2-Way Touring Class Powered Loudspeaker with DSP
The LD Systems DDQ 15 is an ultra high efficiency 2-way biamped loudspeaker for FOH and monitor applications, delay lines, portable PA systems and fixed installations delivering superior touring class performance.
A 24-bit/48 kHz custom Sharc DSP provides volume control, delay, EQ, crossover, phase alignment and comprehensive protection functions for precision adjustment and reliable operation while its 1ms look-ahead limiter ensures distortion-free audio at all levels. In addition, the DDQ features digital encoding, a high pass filter and ground lift switch.
The 15” FaitalPRO neodymium woofer and BMS compression driver complement is biamped by two Hypex UcD700 Class D modules with high efficiency SMPS and extremely low noise and THD. With 1.400 watts RMS output, 38 Hz – 20 kHz frequency response, 80° x 50° dispersion and a peak SPL of 136 dB the DDQ 15 provides superior high-power audio performance.
The 15 mm birch ply bass reflex enclosure incorporates a 50° angle and asymmetrical HF horn rotatable for floor monitor use. The hardware includes a steel grille, multiple flying points and the innovative Evolutive handles for easy portability.
Touring class active PA speakers with Sharc DSP (24bit/48kHz)
Distortion free thanks to 1 millisecond predictive peak limiter
State of the art analog/digital converters (127dB/113dB dynamic range)
Max SPL (peak): 136dB
80° x 50° rotatable asymmetrical horn flare
38 – 20,000 Hz frequency response
2 x Hypex 700 Watt Class D amplifier modules
15″ Faital Pro neodymium woofer
1.4″ BMS compression driver
Switchable high-pass filter
50° monitor angle
13 x M10 flying points
Lightweight
Made in Germany
Technical specification:
Type: active
Version: DSP controlled
Woofer Size: 15“
Woofer Size: 381 mm
Woofer/Midrange Magnet: neodymium
Woofer/Midrange Brand: Faital Pro
Woofer Voice Coil: 3“
Woofer Voice Coil: 75 mm
Tweeter Size: 1.4“
Tweeter Size: 35.6 mm
Tweeter Magnet: ceramic
Tweeter Brand: BMS
Tweeter Voice Coil: 1.75“
Tweeter Voice Coil: 44.4
Amplifier: 2 x Class D, Hypex Ucd700
Dispersion Angle (H x V): 80 x 50°
Power Output (RMS): 1400 (2 x 700 W)
Frequency Response: 38 – 20,000 Hz
Crossover Frequency: 1300 Hz
Max. SPL (continuous): 124 100 – 10,000 Hz dB
Max. SPL (peak): 136 dB
Integral Media Player: no
Protection: RMS power supply limiter, RMS speakers limiter , over current, over voltage, DSP-based “look ahead” limiter
Controls: power switch (On / Off), X-Over Sub, Gain, Ground Lift
Indicators: Operate, Peak Limit, X-Over Sub, Signal
Line Inputs: 1
Line Input Connectors: XLR
Line Outputs: 2
Line Output Connectors: XLR
Power Supply: switching power supply
Operating Voltage: 180 – 264 V AC, 47 – 63 Hz
Housing Material: 15/18 mm birch plywood
Housing Surface: polyurea
Cabinet Type: bass reflex
Monitor Angle: 50°
Width: 420 mm
Height: 736 mm
Depth: 488 mm
Features: LD Systems Evolutive handles, flange 36 mm, 13 x M10 flying points, switchable high-pass filter
Weight
35.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD SYSTEMS DDQ15 15″ 2 way speaker Powered 1400 watt” Cancel reply
User's manual [3,30 MB]
Production Partner 04/2014
DDQ 15 2-Way Touring Class Powered Loudspeaker with DSP
The LD Systems DDQ 15 is an ultra high efficiency 2-way biamped loudspeaker for FOH and monitor applications, delay lines, portable PA systems and fixed installations delivering superior touring class performance.
A 24-bit/48 kHz custom Sharc DSP provides volume control, delay, EQ, crossover, phase alignment and comprehensive protection functions for precision adjustment and reliable operation while its 1ms look-ahead limiter ensures distortion-free audio at all levels. In addition, the DDQ features digital encoding, a high pass filter and ground lift switch.
The 15” FaitalPRO neodymium woofer and BMS compression driver complement is biamped by two Hypex UcD700 Class D modules with high efficiency SMPS and extremely low noise and THD. With 1.400 watts RMS output, 38 Hz - 20 kHz frequency response, 80° x 50° dispersion and a peak SPL of 136 dB the DDQ 15 provides superior high-power audio performance.
The 15 mm birch ply bass reflex enclosure incorporates a 50° angle and asymmetrical HF horn rotatable for floor monitor use. The hardware includes a steel grille, multiple flying points and the innovative Evolutive handles for easy portability.
Touring class active PA speakers with Sharc DSP (24bit/48kHz)
Distortion free thanks to 1 millisecond predictive peak limiter
State of the art analog/digital converters (127dB/113dB dynamic range)
Max SPL (peak): 136dB
80° x 50° rotatable asymmetrical horn flare
38 - 20,000 Hz frequency response
2 x Hypex 700 Watt Class D amplifier modules
15" Faital Pro neodymium woofer
1.4" BMS compression driver
Switchable high-pass filter
50° monitor angle
13 x M10 flying points
Lightweight
Made in Germany
Technical specification:
Type: active
Version: DSP controlled
Woofer Size: 15“
Woofer Size: 381 mm
Woofer/Midrange Magnet: neodymium
Woofer/Midrange Brand: Faital Pro
Woofer Voice Coil: 3“
Woofer Voice Coil: 75 mm
Tweeter Size: 1.4“
Tweeter Size: 35.6 mm
Tweeter Magnet: ceramic
Tweeter Brand: BMS
Tweeter Voice Coil: 1.75“
Tweeter Voice Coil: 44.4
Amplifier: 2 x Class D, Hypex Ucd700
Dispersion Angle (H x V): 80 x 50°
Power Output (RMS): 1400 (2 x 700 W)
Frequency Response: 38 - 20,000 Hz
Crossover Frequency: 1300 Hz
Max. SPL (continuous): 124 100 - 10,000 Hz dB
Max. SPL (peak): 136 dB
Integral Media Player: no
Protection: RMS power supply limiter, RMS speakers limiter , over current, over voltage, DSP-based "look ahead" limiter
Controls: power switch (On / Off), X-Over Sub, Gain, Ground Lift
Indicators: Operate, Peak Limit, X-Over Sub, Signal
Line Inputs: 1
Line Input Connectors: XLR
Line Outputs: 2
Line Output Connectors: XLR
Power Supply: switching power supply
Operating Voltage: 180 - 264 V AC, 47 - 63 Hz
Housing Material: 15/18 mm birch plywood
Housing Surface: polyurea
Cabinet Type: bass reflex
Monitor Angle: 50°
Width: 420 mm
Height: 736 mm
Depth: 488 mm
Features: LD Systems Evolutive handles, flange 36 mm, 13 x M10 flying points, switchable high-pass filter
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
Composite cabinet makes this powerful speaker strong and lightweight
Flexible input options for virtually any application
Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
Active PA speaker with 15" LF driver and 1,100W Class-D power amp
Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
Bass and Treble EQ controls let you fine-tune your sound
Dual-angle pole mount socket makes it easy to position for optimum sound coverage
Injection-molded polypropylene enclosure is strong and lightweight
Recessed carry handle makes transport and setup easier
Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design
Specification
Detail
Powered
Yes
Power Configuration
Bi-amped
LF Driver Size
15“
LF Driver Power Amp
1,000W (peak) Class-D
HF Driver Size
1“
HF Driver Power Amp
100W (peak) Class-D
Frequency Range
45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB)
Maximum Peak SPL
130 dB
Horizontal Coverage Angle
90 degrees
Vertical Coverage Angle
60 degrees
Enclosure Material
Polypropylene
Mounting Options
Pole, Floor Wedge, Fly
Inputs
2 x XLR/TRS combo
Outputs
1 x XLR
Height
28.3“
Width
18“
Depth
14.5“
Weight
60.9 lbs.
Manufacturer Part Number
M15UL
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
SPECIFICATIONS
MODEL
TITAN 15 ACTIVE
GENERAL INFO
System type
Active 15" 2-way Bi-Amplified
Frequency response +/- 3db
50-20kHz
HF SECTION
Hf type
Titanium Compression Driver
Horn dispersion (H x V)
90° x 60°
Hf exit size mm / inches
25mm / 1“
PHYSICAL FEATURES
Enclosure Material
Injection Moulded Polypropylene
Enclosure Colour
Grey or White or Black
Size (mm/inches)
381mm / 15“
IN / OUT PANEL (speaker Level)
Input connector
XLR - 1/ 4" Combo jack
AMPLIFIER POWER
Power On Protection
Power switch on / off mute
Thermal Protection
Amplifier shutdown, auto reset
Low Line Voltage Shut Down
60% Nominal line voltage
Driver Protection
Independent LF and HF limiters
DC Protection
Yes
Short Protection
Yes
Controls
High (±10dB) 10kHz Shelving
Dimensions (HxWxD)
mm
708.3mm x 477.8mm x 401.77mm
inches
27.9" x 18.8" x 15.8“
Microphone / Transmitter
Maximum Input Level
+22dBu
Impedance
4 Ω
MIXER MODEL
INPUT IMPEDANCE
Balanced: 20k ohms Unbalanced: 10k ohms
Clip Limiter
Turns on approx 350W output
Limiter Indicator
Red LED
Power Indicator
Red LED
AC Power details
Power Supply
High Efficiency Switching Mode Power Supply
AC Power Options
AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator
LED
Rigging / Bracket /
10 M8 threaded inserts including 4
Mounting Options
M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket
Impedance Balanced
Balanced: 1k ohm - Unbalanced: 500 ohm
Line Output
Line Output Connector
Switchable LOOP / MIX Balanced Male XLR
Input A - type
Switchable balanced mic or line level input
Input Sensitivity
Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level
+22dBu
Input Connector
XLR - 1/ 4" Combo jack
Input Impedance
Balanced: 20k ohms Unbalanced: 10k ohms
Input B - type
Line level input
Input Sensitivity
XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
Maximum Input Level
+22dBu
Input Connectors
Combo jack: 1/4" - XLR / Summed dual RCA jacks
Bass Response Optimizer
(“BRO“™) circuit
+5dB at 60Hz
Subsonic Filter
30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D)
Rated 350W RMS, 700W Peak
High- Frequency (Class A/B)
Rated 70W RMS, 140W Peak
Electronic Crossover
24dB/octave Linkwitz-Riley
Crossover Frequency
1.8kHz
Controls
High (±10dB) 10kHz Shelving
Equalization
Low (±10dB) 100Hz Shelving
DIMENSIONS & WEIGHT
Net weight ( kg / lbs )
23.7kg / 52.67lbs
Gross weight ( kg / lbs )
26.94kg / 59.27lbs
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features :
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
Ultra-low noise Mic/Line input with Volume control and Clip LED
Dedicated 2-band EQ for perfect sound adjustment
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Thanks to our revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers. Put simply, you get all the power without the back-breaking weight. And the sound quality of these lightweight loudspeakers exceeds that of our extremely popular EUROLIVE B212A and B215A systems — plus we've included two 200-Watt models, the B210D (10“) and B208D (8“) for less demanding applications. Due to their high-efficiency design, they crank out 550/200 of the cleanest, punchiest audio Watts you've ever heard from a compact loudspeaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion — even at extreme operating levels. In addition, all four models feature an Ultra-Low Noise (ULN) Mic/Line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control. Intelligent by Design One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off — that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand. BEHRINGER's D Series' "Intelligent-Design" merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class-D amplifi er topology. Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems! These components work together seamlessly to provide optimum sound quality — and it all takes place automatically, without you having to touch a single knob. Class D Amplifier Technology Delivers High Power With Low Weight. Instead of operating relatively continuously like Class AB circuits, Class D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces the power losses in the output devices. This is easy in theory and complex in practice, which is why there are so many different Class D designs. Without boring you with terms like PWM Generation and Gate Drivers, let's just say that to realize the benefits of a Class D design requires compensating for a lot of potential problems that can cause audible distortion. BEHRINGER didn't invent Class D technology, but our R&D Department has been working for years to perfect our own version with all the benefits of reduced weight and cool running, and none of the drawbacks. That's why we invested over a solid year of research time eliminating pitfalls like quantizing errors and excess dead time, selecting just the right switching frequency (and other equally tech-y terms). And why we spent an equally long time testing individual components to ensure they will stand up to the rigors of the real world. When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supply's capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesn't require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles. Instant PA System With just a single D Series loudspeaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers. Stereo Music System You can even use two D Series enclosures for stereo playback of your MP3, CD or old-skool cassette deck without any additional hardware. Just plug the appropriate stereo "breakout" adapter into your deck's output jack and run the cables to the 1/4" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voilà, instant party! Marvelous Monitoring Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel. Custom-Designed Transducers Let's face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don't cut any corners. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components, like the long-excursion LF transducers and state-of-the-art 1.35" compression drivers we deploy in each and every EUROLIVE enclosure. Low Frequency Response The EUROLIVE D Series was built with extended low frequency handling in mind. With a tuned port, internally braced, injection molded enclosure, each model's custom-designed LF transducer (woofer) really cranks out tight low end. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate. Accurate Non-Fatiguing Midrange and Treble Even if your particular application doesn't include booming bass, you'll love the sheer accuracy of these loudspeakers. Over a year of design went into a exponential horn/aluminum dome compression driver combination that could do justice to loud hard rock or dance music — yet could also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing or acoustical instruments, they are un-matched for being able to articulate complex harmonic details. In fact, many customers think it's the most natural-sounding speaker they've ever heard at anywhere near the price. Processor Controlled Output Dynamic processing is one of the best ways to maximize output without sacrificing sound quality. The D Series' built-in circuitry automatically adjusts program content, allowing the loudspeaker to operate at extreme levels. It accomplishes this by reducing bass output slightly as you approach the limit of the transducers. This frees up LF amp and transducer resources, so that higher overall volume can be realized. It's like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters. By making subtle changes to the crossover frequency and the audio content, the system is able to crank out more sound — without the slightest hint of distortion. Massive Power to Size Ratio Cutting-edge technology and high-fidelity speakers are not all it takes to get your message across — you need power, and lots of it. At the heart of each EUROLIVE D Series loudspeaker are two high-current amplifiers with a total output of 550-Watts for the B212D/B215D and 200-Watts for the B210D/B208D. They're capable of driving the speakers to their maximum with no distortion — and without speaker damage, thanks to active internal protection circuits. Put simply, they will astound you with their massive punch, smooth mids and articulate top-end! Which Speaker do I Need? As you've probably noticed, we make these active loudspeakers in four different woofer sizes. Which one is right for you? Well, let's start with your application. Is it spoken word in a hotel ballroom? Hard rock in a park? A folk singer or a drum 'n' bass DJ? Loud enough for an 18-year old or loud enough for your grandmother? A huge auditorium or a tiny club? Physics are physics and a 15" low frequency transducer has almost 40% more surface area with which to move air than a 12“. A 12" has 30% more area than a 10“, and a 10" has 35% more than an 8“. So the easiest answer is "Whether to choose one speaker cabinet over another depends on your bass requirements." If you're addressing a small meeting, or demoing the latest "slice-o-chop-o-vegamatic" at the swap meet or county fair, the B208D might be all the speaker you'll need. But if you're providing disco to the masses at a standing room only nightclub — or you just need to crank it up louder, then the B215D may be a better choice. As you can see, "Bass requirements" isn't quite as easy an answer as it sounds. The larger a room's cubic volume, the more energy is required to achieve a given level of bass. In other words, when playing the same tune in a big room versus a small room, big room = less bass; small room = more bass. Confused yet? We suggest that you consult your BEHRINGER dealer for more advice on this subject, which is also a good time to do a listening test —against their competition and against each other. Judge for yourself. And then own BEHRINGER with money to spare.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.