Content |
User's manual - LDSATG2 [4,73 MB] |
|
|
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: black
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
| - PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg |
Frequency response (-3 dB) 1 |
60 Hz to 20 kHz |
Frequency range (-10 dB) 2 |
50 Hz to 20 kHz |
Max. SPL 3 |
121 dB |
Coverage angle (H x V) |
100° x 100° |
Amplifier rating |
400 W |
LF transducer |
8 in. woofer - ferrite magnet |
HF transducer |
1 in. titanium dome, neodymium magnet, ferro-fluid cooled |
Crossover frequency |
2.5 kHz |
Connectors |
2 - XLR/TRS Combo
1 - 3.5mm Stereo
1 - Charge port
1 - TRS footswitch
1 - 12 V DC power output |
Enclosure |
Polypropylene |
Grille material |
Powder coated steel |
USB charging |
1.5 A max., device-dependent |
Color |
Black & white |
Dimensions (H x W x D) |
400 mm x 275 mm x 272 mm
15.75 in. x 10.83 in. x 10.71 in. |
Net weight |
7.6 kg
16.8 lb |
Shipping weight |
11 kg
24.3 lb |
Power consumption 4 |
100 - 240 V~, 50 - 60 Hz, 0.8 - 0.6 A |
Battery capacity |
86.4 Wh |
Battery run time (at max output) 5 |
6+ hours |
Battery run time (at moderate output) 6 |
12+ hours |
1 Full space measurement using music DSP preset.
2 Half-space measurement.
3 Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
4 Current rating is 1/8 power.
5 Maximum output before loudspeaker limit indication, with typical program material.
6 Moderate output is approximately 95 dB SPL, with typical program material.
|
Features
400 Watt digital bi-amplification
126 dB max spl
Wide dispersion 90 x 70 constant directivity horn
8" High power neodymium woofer, 2.5" voice coil
1" Mylar dome, neodymium high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 65 Hz ÷ 20 kHz
Max SPL: 126 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 70°
Compression Driver: 1" neo, 1.4" voice coil
Woofer: 8" neo, 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr - Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top
Pole Mount/Cap: Yes
Grille: Steel
Colour: Anthracite grey
Physical Specifications
Height: 480/18.9 mm/inch
Width: 291/11.45 mm/inch
Depth: 274/10.7 mm/inch
Net Weight: 9.2/20.28 kg/lbs
|
Input Connections: XLR and TRS Combo; XLR with Independent Gain - Power Requirement: 120V: 95V - 132V, 50 - 60 Hz, 0.6A; 230V:190V - 264V, 50 - 60 Hz, 0.4A - Frequency Response: (-3 dB)60 Hz - 20 kHz Hz Full Range Mode - Frequency Response: (-10 dB) 48 Hz - 20 kHz Hz Full Range Mode - Recommended High-Pass Frequency: 100Hz (User Selectable) - Max. SPL/1m (calc): 123 dB - LF Transducer: EV8L, 203mm (8-inch) Driver - HF Transducer: DH2005, 25mm (1-inch) Exit Compression Driver - Crossover Frequency: 1800 Hz - Enclosure Material: High Impact Polystyrene - Grill: Polyester Powder Coated, 18GA Galvanized Steel - Height: 457 mm (17.99 inches) - Width: 282 mm (11.1 inches) - Depth: 264 mm (10.39 inches) - Weight: 8.62 kg (19 lbs) - Shipping Weight: 10.3 kg (22.7 lbs) | PROEL V-8-PLUS 8“
Specifications :
- System type : 2-way vented enclosure
- High Frequency Device :1” neodimyium compression driver
- Low Frequency Device :8” woofer with 1.5” voice coil
- Angular Coverage : 90° H x 60° V
- Total peak power : 400 W
- HF Amplifier Continuous Power :50 W Class AB
- LF Amplifier Continuous Power : 150 W Class D
- Power Supply :SMPS
- Processing Analog
- Frequency Response : 70 Hz - 20 kHz
- Max SPL :121 dB
- Connectors IN: COMBO, LINK: XLR M
- Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector
- Monitor Taper : 45°
- Flying System : 4 x M8 - top/bottom
- Construction : Polypropylene
- Cabinet Colour : Black
- Handles : 1 x top
- Mounting Pole : 1 x bottom
- Power Supply : 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
More Specs
- 2-way bi-amped loudspeaker system
- 1” NEODYMIUM compression driver
- Constant coverage 90° x 60° horn
- High-excursion 8” woofer with 1.5” VC
- 400 W Class D power amplifier with SMPS
- Integrated active processor with dual LIMITER circuit
- MIC/LINE input with 2-band EQ
- Front LED with ON or SIGNAL/CLIP selection
- SPL MAX: 121 dB
- Frequency response: 70 Hz - 20 kHz
- Ultra-lightweight reinforced polypropylene cabinet
- Top handle for effortless transport
- Slanted shape for the use as a stage monitor
- Four M8 flying points
- 7 kg total weight
- Dimensions (W x H x D) 280 x 422 x 263 mm
|
Reviews
There are no reviews yet.