LD Systems LDMEI1000G2T Transmitter for LDMEI1000 IN EAR Monitoring

 Battery disposal information [77,1 KB]
  User's manual [7,82 MB]

The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis

• 
  
• Product type: Transmitter
• Radio frequency range: 823 - 832 and 863 - 865 MHz
• Channels: 96 (8 groups of 12 channels)
• Transmission method: FM, stereo
• RF output: 10 mW
• Frequency response: 60 Hz - 16 kHz
• S/N ratio: 85 dB
• Inputs: 2
• Input connections: XLR/ 6.3 mm jack (combo)
• Input impedance: 14 kOhm
• Antenna connector: TNC
• Controls: up, down, set, power, volume headphone, input level, pad
• Indicators: LC display
• Power supply: 12 - 18 V DC
• Width: 200 mm
• Height: 44 mm
• Depth: 96 mm
• Accessories (included): Antenna, power supply, headphones

The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.

These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

• Receiving System: Double conversion superheterodyne
• RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
• Headphone Output Connector: 3.5 mm TRS stereo phone jack
• Headphones Output Power: 65 mW (at 32 ohms)
• Antenna Input: SMA-type, 50 ohms
• Aux. Input Connector: 3.5 mm TRS stereo phone jack
• Batteries: 2 x 1.5V AA (not included)
• Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
• Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
• Net Weight: 133 g (4.7 oz), without batteries
• Accessories Included: EP3 earphone; flexible antenna

 Battery disposal information [77,1 KB]
 Frequenzy List [246,1 KB]

The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis

• Product type: Transmitter
• Radio frequency range: 823 - 832 and 863 - 865 MHz
• Channels: 96 (8 groups of 12 channels)
• Transmission method: FM, stereo
• RF output: 10 mW
• Frequency response: 80 Hz - 15 kHz ± 3 dB
• Inputs: 2
• Input connections: XLR/ 6.3 mm jack (combo)
• Input impedance: 8,5 kOhm
• Antenna connector: TNC
• Controls: up, down, set, power, volume headphone, mono/stereo, AF level (left/right)
• Indicators: LC display
• Power supply: 12 - 18 V DC
• Width: 212 mm
• Height: 38 mm
• Depth: 90 mm
• Accessories (included): Antenna, power supply, headphones

It is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.

Specifications:

- Transmit Power: Switchable 10mW, 50mW
- RF bandwidth: up to 40MHz
- Number of compatible frequencies per band: 20
- Audio frequency range: 35Hz to 15kHz
- S / N Ratio (A weighted): 90dB
- Stereo Separation: 60dB

• Replace the HDMI cable in a meeting room with a wireless connection between a laptop and a display or projector.
• Plug & play: no app or software required.
• No need to connect to a (Wi-Fi) network.
• Supports video resolutions up to Full HD 1080p/60Hz.
• Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
• Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
• Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.