| Content |
Battery disposal information [77,1 KB]
User's manual [7,82 MB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 85 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 14 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, input level, pad
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 200 mm
- Height: 44 mm
- Depth: 96 mm
- Accessories (included): Antenna, power supply, headphones
|
Audio-Technicaʼs System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- 2.4 GHz range – completely free from TV interference
- Three levels of diversity assurance: frequency, time, & space
- Two switched TRS balanced 1/4" output jacks
- Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
- Multi-pairing function to link a single receiver with up to eight body-pack transmitters
- Transmitter battery level display on receiver
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
- Included hook & loop strips for adding receiver to effects pedal board
- Universal (center + or -) 9v–12v DC input
OVERALL SYSTEM SPECIFICATIONS - Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: 7 hours (alkaline)
- Depending on battery type and use pattern
Dimensions: 70.2 mm (2.76“) W x 107.0 mm (4.21“) H x 24.9 mm (0.98“) DNet Weight: 100 grams (3.5 oz) without batteriesAccessory Included: AT-GcW Guitar Input Cable
|
The long throw antenna system is made up of three components; The ATCS-A60MX mixer the ATCS-A60RX receiver antenna and the ATCS-A60TX transmitting antenna.
ATCS-A60MX IR transmitter/receiver mixer
• The master antenna mixer can power up 4 transmitter antennas and 4 receiving antennas.
• Infrared transmission keeps the signal in the room. Therefore multiple conference systems can be used in
adjacent rooms and the conference stays secure.
• The ATCS-A60MX includes rack mount adaptors
ATCS-A60RX IR Receiving Antenna (green indicator)
• The high-power receiving antenna can work up to 15 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
ATCS-A60TX IR receiver antenna (red indicator)
• The high-power transmitting antenna can work up to 20 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
- IR transmitting unit terminal: BNC×4(75 ohms)
- IR receiving unit terminal: BNC×4(75 ohms)
- I/O terminal: BNC×1(75 ohms)
- Operating temperature range: 0 to +40C°
- Power consumption: 50W
- Power supply: 100 to 240VAC, 50/60 Hz
- Dimensions: 44 (H) x 420 (W) x 225 (D) mm
- Weight Approx.: 3.0 kg
- Accessories: AC cord, Rack-mount adapter x 2, Screw to attach the rack-mount adapter x
ATCS-A60TX ATCS-A60RX - Communication method: IR wireless system
- Operating frequency band: 8 to 10 MHz 1 to 5 MHz
- IR wavelength: 870 nm
- Modulation method: Frequency modulation
- Operating distance*: 20 m (TX) 15 m (RX)
- Operating temperature range: 0 to 40C°
- Connecting terminal: BNC jack
- Power supply: 24V dc supplied from the ATCS-A60MX
- Dimensions: 44 (H) x 149 (W) x 97 (D) mm
- Weight: 351 g (TX) 386 g (RX)
|
Description
The PROCAB TST200 Cable Tester comes with all audio and electronics industry standard inputs, such as XLR Male/Female (3-pin/5-pin), 3.5 mm jack, 6.3 mm jack, DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11, BNC. The unit has separate 'Sender' and 'Receiver' units, which are able to be locked together for ease of transport, or split apart for testing cables at either end of a signal chain.
Simply plug in either end of an audio cable into the "A" and "B" side of the device, then select your mode to check signal continuity across all active pins or conductors. The brightly coloured LED's will light up indicating signal continuity and which pins are connected together. The inbuilt speaker of the TST200 also beeps when a successful connection is made between the Sender and Receiver units. If not all connections are made, no beep will sound, and the faulty connection's LED will not be lit.
Thanks to the split unit design means you can test both cables you have on hand, as well as longer cables that are already set up. This time saving feature removes the hassle of packing down your cables just for testing. The sender unit (B) includes a switch to select the speed in which the connections are tested, as well as the power switch.
This two-part cable tester is reliable and durable, whether it be on the road or in the studio. Both the A and B units are powered separately, and each side requires 9V battery power.
Product features
| Dimensions |
165 x 168 x 45 mm (W x H x D) |
| Construction |
Plastic |
| Application |
AV & IT |
|
Rental & MI |
| Series |
Bulk & Accessories |
| Battery disposal information [77,1 KB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Model name: LDMEI1000G2BPR
- Product type: Belt pack receiver
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 80 dB
- THD:
- Audio outputs: 3.5 mm jack
- Max. audio output level: 100 mW
- Controls: Up, Down, Escape, Set, Volume
- Indicators: LC Display, Low Battery, Power
- Power supply: 2 x 1.5 V AA
- Operating time: > 13 hrs., battery-dependent
- Width: 65 mm
- Height: 90 mm
- Depth: 24 mm
|
Round off your Sennheiser Tourguide System with the EK 2020-D receiver. Whether conferences, guided tours or hearing assistance: this extremely sturdy and versatile bodypack receiver provides excellent audio and ease of use for your guests. The EK 2020-D can be used with headphones or an induction neckloop for transmitting the sound to hearing aids equipped with a T coil. Digital transmission ensures optimum reception quality, with a range of up to 100 metres outdoors and around 50 metres indoors. The backlit receiver display shows all settings at a glance. Of course, the bodypack receiver can be used in mixed systems with stethoset receivers.
EK 2020-D: just right for everyone. All your guests need to do is connect their headphones or induction neckloop to the receiver. That's it! The receiver can conveniently be clipped to the shirt pocket or worn on a lanyard. When no signal is received, or when the headphones or neckloop are disconnected, the receiver will automatically switch off to save battery life. The operating time is up to 16 hours.
Features-
Digital RF signal transmission
-
Intuitive operating concept
-
16 hours battery life
-
Free choice of headphones or induction loop
-
Backlit LC display
-
Sturdy housing
|
Reviews
There are no reviews yet.