The LD Systems LDP82A is an active bass reflex multifunctional loudspeaker equipped with an 8" speaker and a 1" compression driver.

This loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 600 W Peak and a sound pressure level of 112 dB (max.). This light loudspeaker impresses with assertive treble and midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.

• Model Name: LDP82A
• Type: Bass Reflex
• Components:
  • Woofer: 8" Custom Made
  • Compression Driver: 1" Custom Made
  • Amplification: Class A / B (Bi-Amp)
• Dispersion: 90° x 40°
• Power (RMS): 150 W
• Power (Peak): 600 W
• Frequency Range: 80 Hz - 15 kHz
• SPL (1 W / 1 m): 92 dB
• Max SPL: 112 dB
• Protection: Over-current
• Controls: Volume, Gain, Mic. Gain, High, Low, On/Off Switch, Ground Lift
• Indicators: Power, Clip
• Connectors:
  • Input: Mic: XLR + Jack 6,3 mm Line: XLR + RCA Phono
  • Output: Line: XLR + Jack 6,3 mm
• Power Supply: Transformer
• Cabinet Material: PP
• Dimensions (W x H x D): 295 x 420 x 235 mm
• Additional features: M8 rigging points, Stand support (36 mm)

• 2000W power via ultra-efficient Class-D amplification
• TruSourceTM Technology
• Mackie designed, vertically-aligned, common-magnet TruSource driver
• 8″ LF woofer / 1.75″ HF compression driver
• Incredibly compact, lightweight design
• Powerful TruSource DSP delivers seamless clarity, consistent dispersion and unmatched fidelity
• DL2 Integrated Digital Mixer
• Powerful, one-touch digital mixer with bright OLED screen
• Two highly-versatile input channels with FX
• Independent channel level, 3-band EQ and effects control
• 16 great-sounding channel effects include reverb, chorus and delay
• XLR/TRS combo and dual RCA connectors
• Handles mic, line, stereo and instrument signals
• Unmatched system control for professional applications
• Multi-band feedback destroyer
• Six speaker modes deliver the perfect voicing for your application
• Alignment delay up to 300ms for delay stack, balcony, etc.
• Three memory locations for instant venue setting recall
• Smart Protect DSP dynamically protects amp/driver
• Innovative ultra-compact design
• 1/3 smaller than a traditional 2-way
• Fit an entire DLM system in nearly any car
• Stack them up for storage
• Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
• Flyable via standard M10 rigging hardware
• Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
• Roadworthy PC-ABS cabinet with  pro black finish and ergonomic top carry handle
• Rugged, powder-coated 20 gauge steel grille
• Integrated kickstand delivers perfect angle for personal monitor use
• Ridiculously lightweight (22 lbs. / 10kg)

User's manual

LD Systems STINGER 8 A G3 Active 8" 2-way bass-reflex PA speaker

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

200W+ 50W RMS - 124dB SPL

• 200mm (8’’) custom woofer with improved efficiency and linearity
• 200Wrms class D amplifier for LF and 50Wrms for HF.
• Low noise toroidal transformer power supply
• On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
• 2 DSP preset for maximum acoustical flexibility
• Available in white colour 8AW

• 2-way bi-amplified, bass-reflex design
• 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
• 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
• Frequency response from 65Hz to 20 kHz
• 80°H x 50°V Constant Directivity Rotatable Horn
• optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• one integrated pocket handle

• • Nearfield & portable PA
• • Foreground/background PA, distributed PA, frontfill and sidefill
• • Houses of worship, video monitoring, retail, clubs, performance theatre, theme parks
• • Compact voice reinforcement systems
• • Stage monitoring