Content |
- Passive 2-way bass-reflex installation speaker
- 250 W permanent load capacity
- 121 dB maximum sound-level pressure
- 12" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined, elegant design, the LD Systems SAT 122 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 12" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 122 G2 achieves a maximum sound pressure level of 121 dB over a frequency response curve of 60 Hz to 19 kHz with a permanent load capacity of 250 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 122 G2 is available in black (Art. No. LDSAT1222G2) or white textured finish (Art. No. LDSAT1222G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
12 "
Woofer size
304.8 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
63.5 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
250 W
Peak power
500 W
Frequency response
60 - 19000 Hz
SPL (1W/1m)
97 dB
Max. SPL
121 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
Black
Cabinet construction
vented
Width
350 mm
Height
580 mm
Depth
310 mm
Weight
16,3 kg
|
The Rx-112/75 is a 12-inch two-way, full-range loudspeaker system with 350 watts continuous, 1,200 watts peak power handling. Can be easily biamped DH7 3-inch voice coil compression driver delivers beautifully detailed sound Asymmetrical 75° x 50° fully rotatable constant-directivity horn. In the factory-delivered position, the horn provides a 15°up/35° down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined. |
The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone low frequency transducer and a 1? throat compression driver with titanium diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board and finished with a hard-wearing black carpet. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided. A 35 mm tripod socket allows for stand mounting. APPLICATIONS: Intended for use in portable sound reinforcement and P.A.
FEATURES: 2-way vented loudspeaker system 1 x 12" speaker 1" compression driver with constant directivity horn 225 W power handling Highly resistant CAB enclosure
SPECIFICATIONS: RMS (Average) Power HandlingR: 225 W Program Power HandlingP: 450 W Peak Power HandlingK: 900 W On-axis Frequency RangeF: 60 Hz - 16 kHz Nominal Impedance: 8 Ω On-axis Sensitivity 1W / 1 mS: 98 dB SPL Rated Peak SPL at Full Power:128 dB Nominal -6 dB BeamwidthsB: 90° Horizontal (average, 500 Hz to 8 kHz) 75° Vertical Speech Coverage AnglesC: 90° Horizontal x 80° Vertical Enclosure Material:Complex Aggregate Board Finish:Blue Gray carpet Connector: 2 paralleled NL4 Speakon, wired Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in Weight: 20.3 kg/ 45 lbs Shipping Weight: 23.5 kg/ 52 lbs |
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
|
Reviews
There are no reviews yet.