LD Systems LDWS100MDX Dynamic microphone for WS100-X Series

With LDs' WS100-X it is simple to use at least 8 systems simultaneously without interferences. All systems transmit in the frequency range of 838 - 865 MHz. According to the order 91/2005 of the German federal network agency, these frequencies have been approved for professional uses �" without additional charges or a registration in Germany. Otherwise the systems are identical to the common WS100 systems working at a frequency range of 790,850 MHz - 813,800 MHz. For the use of more than 4 systems we always recommend our WS100AD antenna splitter and our WS100DA directional antennas.

• Handheld with high-quality dynamic capsule
• Convenient handling and channel setting via ASC infrared frequency scanning
• LCD display of channel, group and battery status
• 2 AA batteries for up to 14 hours of operation

Technical Specifications:

LDWS100MDX:

• Smooth, wide frequency response with slight presence rise
• Uniform cardioid polar pattern for maximum isolation
• Minimal off-axis tone coloration
• Low-frequency roll-off compensates for proximity effect
• Three-stage pop filter minimizes breath pop and noise
• Break-resistant stand adapter
• Frequency response: 50 to 20,000 Hz

The E-835S is a cardioid lead vocal stage microphone specially designed to perform under pressure.

Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 2,7 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 48 x 180 mm
Weight : w/o cable 330 g

The first Neumann microphone with a dynamic capsule. Functionally optimized design
specifically for the broadcast field, featuring integrated pop protection, suppression of
structure-borne noise and a hypercardioid directional characteristic. 
Emotion conveyed with technical perfection. This is the ideal which the Neumann
microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the
requirements of professional broadcast studios and the individual, functionally optimized
design* ensure that these are microphones of character.
The BCM 705 is Neumann?s first dynamic microphone. The housing and headgrille are
identical to those of the BCM 104; only the green logo indicates that this is something new
from Neumann. The principle of reduction to the essentials can be seen in the dynamic
capsule with a hypercardioid directional characteristic, specifically designed for speech
reproduction at close range. Multi-level isolation from structure-borne noise ensures operation
free of interference, even in a lively studio environment.
Mechanical Features
The microphone headgrille twists off easily for quick cleaning. Neumann offers optional,
color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her
individual headgrille. Iin front of the capsule, mounted on a frame holder, a fine gauze serves
as a built-in popscreen.
The microphones of the Broadcast Line have an elastic mount against structure-borne noise,
that is compatible with standard broadcast-segment microphone arms.
Acoustic features
The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the
speech intelligibility. The bass frequency response is designed to compensate for the overemphasis
of the bass caused by the proximity effect.
The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also
efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from
settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.
Mounting
The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio
boom arm.
A thread adapter to fit different connector threads is included. In order to provide protection from
structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.

The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.
 
FEATURES:
Dynamic capsule
Hypercardioid directional characteristic
Characteristic, functionally optimized design*
Integrated, neutral pop protection
Integrated elastic suspension
Individual headgrilles for different users
Colored rings to identify the replacement headgrilles
Easy removal and cleaning of microphone headgrille (with bayonet mount)
Mechanical compatibility with standard studio boom arms
Multi-level isolation from structure-borne noise
No power supply required

APPLICATION HINTS:
Announcer's mic for broadcasting and studio

This is just one of the most common applications. We recommend
additional experimentation to gain maximum use from this microphone.

TECHNICAL DATA:
Acoustical operating principle Pressure gradient transducer
Directional pattern Hypercardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 10 kohm 1,7 mV/Pa = ?55,4 dB ± 1 dB
Rated impedance 200 ohms
Rated load impedance >= 10,000 ohms
Equivalent SPL CCIR 468-3 32 dB
Equivalent SPL DIN/IEC 651 18 dB-A
S/N ratio CCIR 468-3 62 dB
S/N ratio DIN/IEC 651 76 dB
Weight 500 g
Diameter 64 mm
Length 85 mm
Height (without suspension) 110 mm

In the tradition of the SM58^?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.

• Smooth, extended frequency response for outstanding sound for professional live vocal use
• Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
• Pneumatic shock mount reduces handling noise
• Frequency response: 50 to 16,000 Hz

• Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
• Neodymium magnet for high signal–to–noise output
• Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Minimally effected by varying load impedance
• Legendary Shure quality and reliability