LD Systems LDWS100RPS WS 100 R PS – Power Supply for LDWSECO Receiver and LDMEI Sender

19.01 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Input Voltage: 230 – 240 V AC, 50 Hz Input Voltage: 13,5 V DC, 300 mA regulated

 

Read more

  • Input Voltage: 230 – 240 V AC, 50 Hz
  • Input Voltage: 13,5 V DC, 300 mA regulated
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDWS100RPS WS 100 R PS – Power Supply for LDWSECO Receiver and LDMEI Sender”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDWS100RPS WS 100 R PS - Power Supply for LDWSECO Receiver and LDMEI Sender removeShure UA-870WB Directional UHF Antenna removeSHURE PS40E-In-Line Power Supply -220 V- removeTOA IR-300M Infrared Wireless Microphone removeLD Systems LDWS100GC Guitar Cable WS100BP removeAKG RA 4000B Active Dipoleantenna remove
NameLD Systems LDWS100RPS WS 100 R PS - Power Supply for LDWSECO Receiver and LDMEI Sender removeShure UA-870WB Directional UHF Antenna removeSHURE PS40E-In-Line Power Supply -220 V- removeTOA IR-300M Infrared Wireless Microphone removeLD Systems LDWS100GC Guitar Cable WS100BP removeAKG RA 4000B Active Dipoleantenna remove
Image
SKULDWS100RPSUA870WBPS40EIR-300MLDWS100GCRA 4000B
Rating
Price 19.01 incl. GR VAT 459.39 incl. GR VAT 37.50 incl. GR VAT 290.00 incl. GR VAT 8.50 incl. GR VAT 209.00 incl. GR VAT
Stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 4 left in stock (can be backordered)

Available on backorder

AvailabilityIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 4 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Input Voltage: 230 - 240 V AC, 50 Hz
  • Input Voltage: 13,5 V DC, 300 mA regulated

Shure UA-870WB Directional UHF Antenna

A Directional Antenna for Shure U4 and ULX Receivers!

The Shure UA870 is an active UHF wireless directional antenna featuring a log periodic dipole array.
When compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by the UA870
offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area.

To compensate for coaxial cable signal loss, the UA870 has an on-board amplifier that offers user
selectable 3 or 10dB gain. The gain setting is indicated by two LEDs. Remote 12 Vdc power for the
antenna amplifier is provided by a Shure U4 receiver or a Shure UA840 antenna distribution system
through the connecting coaxial cable.

The UA870 can be mounted on a microphone stand, suspended from the ceiling, or mounted to a
wall using the integrated swivel adapter bracket. The UA870 is weather resistant for use outdoors.
For best diversity performance, use two UA870 antennas.

The UA870WB is a UHF wideband (470-900MHz) active directional antenna for U4S, U4D, ULXP
and ULXS receivers or UA844 and UA845 antenna distribution systems.

 Model Description:
In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Receivers and P4M Personal Monitor Mixer, P4T Transmitter

Model Details:
The Model PS40E is a In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Recievers and P4M Personal Monitor Mixer, P4T Transmitter.

Specifications:

  • Power : 220 VAC

The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Input Sensitivity Adjustment Adjustment range: -9 dB to 0 dB (factory preset: 0 dB)
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Input External microphone input (φ3.5 monaural mini jack)
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“)
Weight 130 g (0.29 lb) (with battery and strap)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

Specifications WS1000R
  • Frequency Range: 790.850 MHz - 813.800 MHz
  • Switching bandwith: 0.025 MHz
  • No. of channels: 160 (10 groups of 16 CHN)
  • Sensitivity: -94 dBm for 30 dB SINAD, typical
  • Image Rejection: >60 dB
  • S/N Ratio: >105 dB (A)
  • T.H.D
  • Audio Output Level XLR connector: -12 dBV
  • 1/4inch connector: -18 dBv
  • Audio Response: 60 Hz - 16 kHz
  • Dynamic Range: >95 dB A-weighted
  • Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
  • Power Requirements: 12-18 V dc at 400mA

Carrier frequency range: 650 to 870 MHz
Total gain (antenna + internal amplifier): 17 dB
RF input: 1 BNC socket, 50 ohms
RF output: 1 BNC socket, 50 ohms
Operating voltage: 8 VDC from PS 4000 or ASU 4000 via connecting cable
Dimensions: 110 x 35 mm (4.3 x 1.4 in.)
Weight: 100 g (3.5 oz.)

  • For indoor or outdoor use, specifically, for near- field antenna setups with no preferred direction
  • Integrated high-performance antenna booster for use with antenna cables up to 180 m (600 feet) long (RG 213, in conjunction with 2 x AB 4000)
  • Remote powering option
  • Rugged, water-resistant case, BNC output
  • Status LED
Weight0.10 kg1.00 kg0.50 kg0.14 kg0.04 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 0.14 kg
Weight 0.04 kg
Weight 0.10 kg

Recently Viewed Products