LD Systems LDEB152G3 STINGER 15 G3 Passive speaker 500W

• Passive 2-way bass-reflex PA speaker
• 500 watts RMS
• 127 dB maximum sound pressure level
• 15" Custom Woofer and BMS driver
• Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
• Birch plywood cabinet with extremely durable polyurea coating
• Shock-resistant front grille to protect the loudspeaker
• 36 mm Dual Tilt stand attachment with 0° and 5° tilt angle
• Extensive and smart accessories for installation and transport

The P6215 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for very high output and longer throw applications.

The high-frequency section is a constant directivity CMD horn loaded to a 1.3” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low frequency transducer is a 15” woofer with a 3” voice coil. The cabinet is equipped with 12 x M10 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. P6215 meets the requirements of IP 55 code (International Protection Rating)

Wharfedale Titan 15 400W Rms - 1600W Peak ! 15" Moulded Lightweight Enclosure Passive Speaker

Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15” low frequency driver with 2” titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.

MODEL TITAN 15 PASSIVE
GENERAL INFO
System type 15” 2-way passive
Frequency response +/- 3db 50-18kHz
Sensitivity (db 1w@1m) 97dB
System impedance 8 ohms
Maximum SPL Peak dB 129dB
POWER HANDLING (Watts)
Continous RMS 400
Program 800
Peak 1600
LF DRIVER
Lf driver size mm / inches 1x15”
Lf voice coil size 75mm/3“
HF SECTION
Hf voice coil size 51mm/2“
Hf exit size mm / inches 25mm/1“
Hf type Compression Driver
Hf diaphragm material Titanium
Horn dispersion (H x V) 90 x 60
Hf horn shape EWG™ - Elliptical Waveguide
Hf peak indicator Peak LED ring in horn throat
CROSSOVER SECTION 2-way
Crossover Frequency / Filter 1.8kHz / 12dB per oct.
Hf driver protection DTF™ — Dynamic Thermal Filament (2 x SK3 Bulb)
CONNECTORS
IN / OUT PANEL (speaker Level)
Input connector 2 x 1/4” jacks and2 x Speakon™
PHYSICAL FEATURES
Enclosure type Molded Polypropylene
Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications
Finish Black or White
Handle quantity 2 carry handles (one on each side)
Suspenison points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint
Stand adapter - BOTTOM Pole-mount receptacle with lock screw, Optional wall-mount bracket
DIMENSIONS & WEIGHT
Height ( mm / ins ) 708mm/27.9“
Width Front / Rear / mm / ins 477.8mm/18.8“
Depth ( mm / ins ) 401.77mm/15.8“
Net weight ( kg / lbs ) 22kg/48.4 lbs
Gross weight ( kg / lbs ) 25kg/55 lbs.

Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.

Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.

Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.

The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.

Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.

Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.

Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.

C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required

Features:

• Tough, paintable exterior coating
• Dual cast-frame 15" drivers
• Frequency response: (-10dB) 42Hz - 16kHz
• 1,000W program handling, 2,000W peak
• Sensitivity: 99dB
• 20“W x 46“H x 24“D
• 101 lbs.

• Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
• Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
• Stainless steel bracket
• 15" high-output LF transducer with 2" voice coil
• RCF Precision Neo 1" Compression Driver with 1.5" voice coil
• 90° x 60° constant directivity horn
• 10° X 20° enclosure sides for array configurations
• Active Mosfet Compression Driver Protection
• 12 brass suspension points (M10)
• Line transformer

• Frequency Response -10 dB: 75 Hz ÷ 20 kHz
• Max SPL @ 1m: 129 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 60°
• Directivity index; Q: 13.3
• System Sensitivity: 98 dB
• Nominal Impedance: 16 Ω
• Power Handling: 300 W
• Peak Power Handling: 1200 W
• Protections: dinamyc
• Crossover frequencies: 1300 Hz

• Compression Driver: 1" HF driver, 1.5" voice coil
• Nominal Impedance: 8 Ω
• Input Power Rating: 25 W AES
• Sensitivity: 108 dB
• Woofer: 15" woofer, 2.5" voice coil
• Nominal Impedance: 16 Ω
• Input Power Rating: 250 W AES
• Sensitivity: 98 dB

• Input connector: 4-adriges Neopren Kabel, 5m
• Constant voltage transformer: 70/100 V
• Power Selection: 70V/60W, 30W , 100V/120W, 60W

• Cabinet Material: Polyethylene rotomoulded
• Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
• Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
• Colour: grey

• Height: 463 / 18.22 mm/inch
• Width: 463 / 18.22 mm/inch
• Depth: 433 / 17.04 mm/inch
• Net Weight: 19.4 / 42.76 kg/lbs

    * 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver™ provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * PT™ Progressive Transition™ Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Tri-Amp Switchable

    * Optional planar array frame kit PAF-2K for 3-wide array with ASB6128V subwoofer center. (See AE Series Array Guide).

    * For fixed installation applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live nightclubs, dance-clubs/discotheques, sports facilities and themed entertainment venues.

     

Frequency Range       :       38 Hz - 19 kHz (-10 dB)

Frequency Response       :       45 Hz - 17 kHz ( ± 3 dB)

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       10

Directivity Index (DI)       :       10 dB

Crossover Modes       :       Tri-amp / Bi-amp switchable

Passive Crossover Slopes       :       MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz

Transducer Power Rating (AES)       :       LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs

Long-Term System Power Rating (IEC)       :       LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs

Maximum SPL       :       LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)

System Sensitivity of Passive Sections 6       :       MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)