| Content |
CD-RW Recorder - Slot loading transport
- Acceptable discs: CD-R, CD-RW, CD-R-DA, CD-RW-DA
- High Speed Recording Media is applicable
- MP3 playback
- 24 bit AD/DA converter
- Digital input volume control
- Sampling rate converter (32kHz/ 44.1kHz / 48kHz)
- Unbalanced analog I/O (RCA)
- COAXIAL and Optical digital I/O (CD)
- Fade in and out
- Auto Track Increment (via SPDIF or Audio Level)
- Erase or Un-finalize of CD-RW discs
- Multiple playback modes
- Pitch control (±12.5%, CD-DA only)
- Key control (±6 half tone, CD-DA only)
Cassette - 10% Pitch Control
- Return to Zero Function
- Dolby B Noise Reduction
- Auto Reverse
General - RIAA Phono Input for recording onto CD-R/RW discs or cassette tape
- Independent Output for CD and Cassette (selectable)
- Continuous Play between Cassette & CD
- Cassette to CD-R/RW dubbing and vice versa
- Headphone Output w/Level Control
- RC-222 Wireless Remote Included
- Dedicated analog input level controls
- Power-on play
Specifications
CD recorder section
Recordable discs CD-R, CD-R-DA, CD-RW, CD-RW-DA (High speed CD-RW is supported)
Quantization bit depth 16 bit linear
Sampling frequency 44.1 kHz
Frequency response 20 Hz – 20 kHz, ±0.8 dB (playback)
20 Hz – 20 kHz, ±1.0 dB (recording)
S/N ratio 92 dB (playback)
88 dB (recording)
Dynamic range 92 dB (playback)
88 dB (recording)
Total harmonic distortion 0.006 % (playback)
0.01% (recording)
Channel separation (1 kHz) 80 dB (playback)
75 dB (recording)
Wow and flutter unmeasurable (
Digital inputs
Sampling rate 32–48 kHz (converter on)
44.1 kHz (converter off)
Coaxial (SPDIF) RCA (IEC60958 Consumer use)
Optical (SPDIF) TOSLINK (IEC60958 Consumer use)
Digital outputs
Coaxial (SPDIF) RCA (IEC60958 Consumer use)
Optical (SPDIF) TOSLINK (IEC60958 Consumer use)
Line input 1 RCA (unbalanced)
Nominal input level –10 dBV (Full Scale -16 dB)
Maximum input level +6 dBV
Nominal input impedance 50 kOhm, ±10 %
Line output 1 RCA (unbalanced)
Nominal output level –10 dBV (–16 dBFS)
Maximum output level +6 dBV, ±2 dB
Nominal output impedance 600 Ohm, ±10 %
Cassette recorder section
Number of channels 4-track, 2-channel stereo
Heads Record/playback x 1 (rotary reverse), erase x 1
Type of tapes Recording and playback: Compact Cassette C-60, C-90 Type I (Normal), Type II (high-position)
Playback only: Type IV (Metal)
Tape speed 4.76 cm/s
Motor DC servo motor x 1
Wow and flutter | The CD-400UDAB is a compact-sized, rack-mountable and remote-controllable media player that can play tracks from CDs, USB memory devices, SD cards and Bluetooth devices. It also includes an FM/DAB+ tuner with 20 presets to play music from radio stations and a front-panel mini-jack input to connect devices such as portable music players. The tuner has its own output enabling the user to supply two rooms with different music signals, for example.
Remote control is possible by the included wireless RC-CD400 and by serial control via the built-in RS-232C port. This all-in-one CD player is suitable for a wide range of applications, from background music in touring, restaurants or small stores to use in public facilities.
Features at a glance
- Ultra-compact, rack-mountable media player with DAB+/FM tuner and Bluetooth receiver
- Multiple playback sources:
- Audio CD playback
- MP3 and WMA file playback from CD
- Audio file playback from SD and USB memory (MP3, AAC, WAV, WMA)
- DAB+/FM radio playback (can be output from the main or separate output connectors)
- Playback via Bluetooth connection with a smartphone or computer
- Playback from other audio sources via AUX IN connector
- CD standards supported: CD-DA, CD-ROM, CD-R, CD-RW (CD-DA format only)
- Slot-loading CD drive mechanism
- Numeric keys for direct track selection
- Playback modes include Continuous, Single, Random
- Repeat playback (All, Single, A–B)
- Incremental play (skip to each next track by pressing the PLAY button; available for CD, USB, SD)
- Resume function (start playback from the track where the unit was last stopped)
- Folder playback with SD and USB memory
- Dubbing from CD or tuner to SD or USB memory (MP3 format)
- Time display (track elapsed / track remain / total elapsed / total remain)
- Power-on play (timer function)
- Lock function to avoid accidental operation
- Anti-shock memory
- XLR balanced analogue output (main)
- RCA unbalanced analogue output (main)
- RCA unbalanced analogue output (tuner)
- Remote control via RS-232C serial connector (D-sub 9-pin)
- Optional Ethernet interface card (IF-100E) available for external control over a network (Telnet protocol)
- Headphones output with dedicated volume control
- Backlit LC display
- Wireless remote control included
- Included accessory: Removable mains power cable, RC-CD400 wireless remote control, rack-mounting screw kit, FM antenna, owner’s manual with warranty
Specifications
| General |
| Supported media |
|
|
| USB memory |
|
512 MB – 64 GB |
| SD card |
|
512 MB – 2 GB |
| SDHC card |
|
4–32 GB |
| CD |
|
CD-DA, CD-ROM, CD-R, CD-RW (CD-DA format only) |
| Supported file systems |
|
FAT16, FAT32 |
| Supported file formats |
|
|
| CD-DA |
|
44.1 kHz, 16 bit |
| MP3 |
|
44.1 / 48 kHz, 32–320 kbit/s and VBR (MPEG1/2 Audio Layer 3) |
| WAV (USB/SD only) |
|
44.1/48 kHz, 16 bit |
| WMA |
|
44.1/48 kHz, 32–320 kbit/s and VBR (WMA v9 standard, DRM not supported) |
| AAC (USB/SD only) |
|
44.1/48 kHz, 8–320 kbit/s and VBR (MPEG4 AAC-LC audio stream) |
| Number of audio channels |
|
2 channels (stereo), 1 channel (mono) |
| Recording file format |
|
MP3 (44.1 kHz, 96/128/192/320 kbit/s) |
| Bluetooth receiver |
| Bluetooth version |
|
v4.2 |
| Output class |
|
Class 2 |
| Supported profiles |
|
A2DP, AVRCP |
| Supported A2DP codecs |
|
SBC, AAC, aptX |
| Supported A2DP content protection |
|
SCMS-T |
| Tuner |
| Frequency range |
|
FM: 87.5–108 MHz
DAB: Band III, 174–240 MHz |
| Antenna connector |
|
F-type (female), 50 Ω, unbalanced |
| Analogue audio inputs and outputs |
| AUX analogue audio input (unbalanced) |
|
3.5-mm TRS mini-jack |
| Nominal input level |
|
–20 dBV (0.1 Vrms) |
| Maximum input level |
|
–4 dBV (0.63 Vrms) |
| Input impedance |
|
≥10 kΩ |
| Main analogue audio outputs (balanced) |
|
XLR-3-32 (1: GND, 2: HOT, 3: COLD) |
| Nominal output level |
|
+4 dBu (1.23 Vrms, Output Attenuation: 0 dB) |
| Maximum output level |
|
+20 dBu (7.75 Vrms, Output Attenuation: 0 dB) |
| Output impedance |
|
100 Ω |
| Main analogue audio outputs (unbalanced) |
|
RCA |
| Nominal output level |
|
–10 dBV (0.316 Vrms, Output Attenuation: 0 dB) |
| Maximum output level |
|
+6 dBV (2.0 Vrms, Output Attenuation: 0 dB) |
| Output impedance |
|
200 Ω |
| Tuner analogue audio outputs (unbalanced) |
|
RCA |
| Nominal output level |
|
–10 dBV (0.316 Vrms, Output Attenuation: 0 dB) |
| Maximum output level |
|
+6 dBV (2.0 Vrms, Output Attenuation: 0 dB) |
| Output impedance |
|
200 Ω |
| Headphones output |
|
6.3 mm stereo jack |
| Maximum output power |
|
≥20 mW + 20 mW (THD+N ≤0.1 %, 32 Ω load) |
| Control I/O |
| RS-232C |
|
D-sub 9 pin |
| Audio performance |
| Frequency response |
|
20 Hz – 20 kHz, ±1 dB (Fs: 44.1 kHz, 48 kHz, JEITA) |
| Total harmonic distortion |
|
≤0.005 % (JEITA) |
| S/N ratio |
|
≥95 dB (JEITA) |
| Dynamic range |
|
≥90 dB (JEITA) |
| Channel crosstalk |
|
≥90 dB (JEITA) |
| Power supply and other specifications |
| Mains power |
|
AC 100–240 V, 50/60 Hz |
| Power consumption |
|
20 W |
| Overall dimensions (W × H × D) |
|
483 mm × 47 mm × 296 mm |
| Weight |
|
3.3 kg |
| Operating temperature range |
|
5–35 °C |
| Included accessories |
|
Removable mains power cord, wireless remote control (RC-CD400), rack-mounting screw kit, FM antenna, owner’s manual/warranty |
| Optional accessory |
|
IF-E100 Ethernet option card, allows the unit to be controlled over a network (Telnet protocol) |
Design and specifications subject to change without notice. |
The DN-C110P is the entry level CD player in the Denon Professional P Series. Designed specifically for use in commercial installations, from bars and clubs to education and the corporate sector, the Denon Professional DN-C110P replaces the popular DN-C100P model, with which it shares the large 3U rackmountable form, operational simplicity, assured reliability, and legendary Denon sound quality. The fascia maintains the same simple uncluttered control layout and large central display, for ease of operation and use in ambient lighting conditions.
A new feature of the DN-C110 is its ability to playback MP3 and WMA music files from CD/CDR/CDRW media.
Other features include IR remote control, program play, random play, and disc and track repeat modes.
- CD/CDR playback
- IR Control
- Optical Digital Output
- Program Playback
- Random Playback
- Repeat Playback (track & disc)
- MP3/WMA file playback via CDROM
- 3U/HE 19" Rackmount kit supplied
| 1 U flat CD player for permanent installation e.g. in restaurants, fitness studios, retail locations Audio CD/ CD-R/CD-RW/MP3 CD Full CBR/VBR MP3 support Slot-in drive 40 seconds anti-shock protection Adjustable headphones output (3.5 mm jack) on the front panel Adjustable master output (XLR and RCA) Recording output (RCA) Pitch adjustment up to ±24 %, can be deactivated Cue function Seamless Loop/Reloop function Single or continuous play Random play Repeat functions: repeat 1, repeat folder, repeat all Title programming (audio CD) Comfortable track selection with skip buttons and +10 button Folder navigation Alphanumeric LCD with blue backlight Indication of elapsed time, remain time (MP3 CD) or total remain time (audio CD) Indication of artist and title name (MP3 CD) Bargraph display (audio CD) Pitch adjustment is displayed in % Rack installation (1 U), rack brackets removable
CD/MP3 player with IR remote control and XLR connectors
1 U flat CD player for permanent installation e.g. in restaurants, fitness studios, retail locations
Audio CD/ CD-R/CD-RW/MP3 CD
Full CBR/VBR MP3 support
Slot-in drive
40 seconds anti-shock protection
Adjustable headphones output (3.5 mm jack) on the front panel
Adjustable master output (XLR and RCA)
Recording output (RCA)
Pitch adjustment up to 24 %, can be deactivated
Cue function
Seamless Loop/Reloop function
Single or continuous play
Random play
Repeat functions: repeat 1, repeat folder, repeat all
Title programming (audio CD)
Comfortable track selection with skip buttons and +10 button
Folder navigation
Alphanumeric LCD with blue backlight
Indication of elapsed time, remain time (MP3 CD) or total remain time (audio CD)
Indication of artist and title name (MP3 CD)
Bargraph display (audio CD)
Pitch adjustment is displayed in %
Rack installation (1 U), rack brackets removable
Power supply: 230 V AC, 50 Hz
Power consumption: 30 W
Type: CD/MP3 player
Suitable CDs: CD/-R/-RW in CD-DA and MP3 formats (12 cm)
Quantization: 1-bit D/A converter
Sampler frequency: 44.1 kHz
Pitch adjustment: 16 %
24 % via remote control
Frame accuracy: 1/75 sec
Program memory: 20 titles (audio CD)
Display: elapsed time, remain time, total remain time (audio CD)
artitst, title name, elapsed time, remain time (MP3 CD)
Distortion: 0.1 %
S/N ratio: 80 dB
Frequency range: 20 - 20000 Hz
Headphones: 3.5 mm stereo jack
Master audio output: stereo RCA, unbal.
stereo XLR (3-pin), bal.
Record output: stereo RCA, unbal.
Remote control: 2 x 1.5 V micro battery (type AAA)
Dimensions: 482 x 270 x 44 mm
rack installation, 1 U
Weight: 3 kg |
The Citronic MPCD-4 Ultima is a dual full function MP3/CD Player with features like folder access, accurate seamless loop where the IN and Out points can be edited, hot cues, Tempo lock, scratch function, crystal clear display and slot loading mechanisms. All this and more work with MP3 as accurately as with CD, to create the ultimate player. The MPCD-4 uses an Fl tube display allowing crystal clear text display using dot matrix text characters of the folder/tracks title, time, BPM, plus and indication of other features activated. The MPCD-4 has full and accurate pitch control over MP3 files including "Pitch Lock”. The hot CUE buttons allow on the fly cue points or loops to be saved into the buffer memory for quick access, these can be then saved, next time the disc is inserted the cue/loop points that have been saved will be automatically recalled.
MP3 playback with file and folder text
Intelligent memory system stores 500 cue/loop points
Reads Audio and MP3 CDs, CD-R, & CD-RW Discs
Pitch lock (Master Tempo) for both CD & MP3
|
The CMP30 is a All-in-one audio source device which accommodates three different kinds of audio sources into one single device. it combines a CD-Player, MP3 player and AM/FM tuner into one single rack space 19・E housing. On the front a CD slot, a USB slot and a SD/MMC memory card slot are provided. This makes it possible to play regular audio CDs as well as MP3 files from either CDs, USB memory sticks or SD/MMC memory cards. There are two separate stereo outputs provided on the rear side, one for the CD & MP3 player while the other one is used for the AM/FM tuner. Because of these two separate stereo outputs, these two devices can operate simultaneously. This feature can be useful for Multi-Zone systems where multiple audio input devices are required. An rs232 control port makes the operation possible from external control devices such as home automation systems from AMX and crestron. ![]()
- Model name: AUCMP30
- Control: RS232
- Mounting: 19"
- Unit Height: 1U
- Power Supply: 240 V AC / 50 - 60 Hz
- Dimensions (W x H x D): 483 x 44 x 380 mm
|
Reviews
There are no reviews yet.