| Content | An Easy-To-Use Portable Recorder with All New Mics and Breakthrough Wi-Fi Technology
The groundbreaking DR-22WL from TASCAM is the first portable recorder to include Wi-Fi for transport control, file transfer, and audio streaming to your smartphone or PC. Other innovations like the new Scene Dial make it easier than ever to capture great-sounding recordings and share them online. A set of stereo condenser microphones is arranged in true XY pattern for ideal stereo imaging. The eight-position Scene Dial selects recording settings for typical situations, or can be set to full manual for greater control.
Included in the DR-22WL is a Wi-Fi function for controlling its transport and transferring files to a smartphone or computer. A free app for iOS and Android controls the transport and transfers files for instant upload. For a recording beginner or experienced user looking for a great-sounding, portable recorder with Wi-Fi, the DR-22WL is the only choice. |
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
| TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for.
The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage.
The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
- Record to SD/SDHC card (Up to 32GB)
- Simultaneously record up to 4 tracks
- Record Mode：MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
- Recording format：44.1/48/96kHz 16/24bit (WAV/BWF)
- TASCAM original HDDA microphone preamps
- Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
- Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
- Plug-in power and high-output mic input supported on inputs 3-4
- CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
- CAMERA IN connector for sound monitoring from the camera
- Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
- 50mW/ch headphone output
- Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
- Handles protect the screen and can be used to attach a shoulder strap
- Soft-Touch Rubber Keys for silent operation
- HOLD switch to prevent accidental operation
- QUICK button feature for easy access to various functions
- 128x64 pixel LCD with backlight
- USB 2.0 connection for high-speed transferring of files
- Mini USB cable included
- Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
- Can extend battery life with BP-6AA battery pack (sold separately)
- Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
- Internal mixer: PAN and LEVEL controls
- Low cut filter(40/80/120Hz)
- Limiter (1/L and 2/R can be selected for link-operation)
- Delay function for microphone distance adjustment (up to 150ms)
- M-S decode function
- Slate tone generator (AUTO/MANUAL)
- Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
- Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
- File name format can be set to use a user-defined word or date
- Dual-recording function allows two files to be recorded simultaneously at different levels
- Auto-record function can automatically start and stop recording at set level
- Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
- Self-timer function for solo recording
- New file starts recording automatically without interruption when maximum file size is reached
- Track incrementing function allows a recording to be split by creating a new file when desired
- Jump back and play function
- Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
- Resume function to memorize the playback position before the unit is turned off
- MARK function up to 99 points per audio track
- DIVIDE function
SPECIFICATIONS
| Recording media |
SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
| Recording format |
|
| WAV |
44.1/48/96kHz, 16/24bit |
| BWF |
44.1/48/96kHz, 16/24bit |
| Number of channels |
4channel (stereo x2) |
| Analog audio input |
|
| 1/L, 2/R connectors |
|
| Connector |
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack |
| Set to "MIC / MIC+PHANTOM“ |
|
| Input impedance |
2k ohms |
| Phantom power |
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
| Maximum input level |
0dBu |
| Minimum input level |
-72dBu |
| MIC input gain |
TRIM MAX |
| LOW |
+11dB |
| MID |
+36dB |
| HIGH |
+52dB |
| Set to "LINE“ |
|
| Input impedance |
10k ohms or more |
| Standard input level |
+4dBu |
| Maximum input level |
+24dBu |
| 3-4 connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power) |
| Input impedance |
10k ohms |
| Maximum input level |
+10dBV |
| Minimum input level |
-50dBV |
| MIC input gain |
TRIM MAX |
| LOW |
+3dB |
| HIGH |
+26dB |
| CAMERA IN connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Input impedance |
10k ohms |
| Standard input level |
-10dBV |
| Maximum input level |
+6dBV |
| Analog audio output |
|
| CAMERA OUT connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Output impedance |
200 ohms |
| Standard output level |
-50dBV |
| Maximum output level |
-30dBV |
| LINE OUT connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Output impedance |
200 ohms |
| Standard output level |
-10dBV |
| Maximum output level |
+10dBV |
| PHONES connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Maximum output level |
50mW + 50mW |
| USB |
|
| Connector |
Mini-B type |
| Format |
USB2.0 HIGH SPEED mass storage class |
| REMOTE |
|
| Connector |
2.5mm TRS jack |
| Power |
Four AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
| Power consumption |
5.4W |
| Continuous operation time |
2ch WAV, 44.1kHz, 16bit rec |
| DR-60D |
|
| Alkaline batteries (EVOLTA) |
About 2:30 min (Phantom on)
About 4:30 min (Phantom off) |
| NI-MH batteries (eneloop) |
About 3:15 min (Phantom on)
About 5:00 min (Phantom off) |
| NI-MH batteries (eneloop pro) |
About 3:45 min (Phantom on)
About 6:00 min (Phantom off) |
| DR-60D+BP-6AA |
|
| Alkaline batteries (EVOLTA) |
About 5:30 min (Phantom on)
About 10:30 min (Phantom off) |
| NI-MH batteries (eneloop) |
About 7:30 min (Phantom on)
About 12:00 min (Phantom off) |
| NI-MH batteries (eneloop pro) |
About 9:30 min (Phantom on)
About 14:30 min (Phantom off) |
| Dimensions |
133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
| Weight |
510g (not including batteries) |
| Operating temperature |
0˚C to 40˚C |
| Standard accessories |
USB cable, warranty card, Owner's manual |
| Computer compatibility |
| Windows |
| OS |
Windows XP, Windows Vista, Windows 7, Windows 8 |
| CPU |
Pentium 300MHz or more |
| RAM |
128MB or more |
| USB |
recommended: USB2.0 |
| Macintosh |
| OS |
Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8) |
| CPU |
Power PC, iMac, G3, G4 266MHz or more |
|
64MB or more |
| USB |
recommended: USB2.0 |
| Audio performance |
| Frequency response |
20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
| Distortion |
0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
| S/N ratio |
92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
| Equivalent input noise |
-120dBu or more |
Recording duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
| File format(recording setting) |
SD/SDHC card capacity(hours:mintes) |
| 1GB |
2GB |
4GB |
8GB |
| WAV/BWF 16bit(STEREO) |
44.1kHz |
1:41 |
3:22 |
6:44 |
13:28 |
| 48kHz |
1:33 |
3:06 |
6:12 |
12:24 |
| 96kHz |
0:46 |
1:33 |
3:06 |
6:12 |
| WAV/BWF 24bit(STEREO) |
44.1kHz |
1:07 |
2:15 |
4:30 |
9:00 |
| 48kHz |
1:02 |
2:04 |
4:08 |
8:16 |
| 96kHz |
0:31 |
1:02 |
2:04 |
4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
| DP-008EX
- Eight mono tracks
- CD-quality recording (16bit/44.1kHz)
- Two tracks simultaneous recording/ eight tracks simultaneous playback
- Dedicated stereo master track available
- Record to SD/SDHC card (Up to 32GB)
- 2 Built-in omni-directional condenser microphones
- Microphone sensitivity can be selected from 2-positions (Low/High)
- Two TS 1/4" or XLR mic/line inputs
- INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
- Phantom power supply
- Independent LEVEL/PAN/Reverb SEND knobs for each track
- Two RCA unbalanced line inputs
- 20mW/ch headphone output
- Footswitch ready with polarity switching (Notice: can't use RC-3F)
- 128x64 dot-matrix LCD with backlight
- Four AA batteries operation up to 6.5 hours (When recording, using the eneloop battery)
- Insert effects for input channels (2-band shelving EQ, compressor, exciter, de-esser)
- Mastering effects (2-band shelving EQ, multi-band compressor, normalize)
- Auto analysis mastering function
- 2-band shelving EQ for each track
- Reverb effects (Hall1/2,Room,Studio,Plate1/2)
- Optional AC adapter ready (TASCAM PS-P520)
- Can connect an external battery pack (TASCAM BP-6AA)
- Direct locate function by jog-wheel
- Repeat playback between IN/OUT point
- Track edit functions（COPY PASTE, COPY INSERT, MOVE PASTE, MOVE INSERT, OPEN, CUT, SILENCE, CLONE TRACK, CLEAN OUT)
- Bounce function allows recording of more six tracks
- UNDO/REDO(UNDO HISTORY) function
- Chromatic tuner and metronome included
- High-speed data transfer by USB2.0 connection
- Backup and restore songs
- File import/export by Wav format (mono/stereo)
- Export stereo master file as stereo wav format
- 2GB SD card included
|
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
|
The ultimate record-anywhere multitrack.
Capture inspiration whenever and wherever you are.
The new MR-8 Mk II is the easiest to use digital multitrack ever. If you can operate a tape recorder, you'll be recording and multitracking within minutes of opening the box.
By putting all the major controls and functions right there on the top panel instead of buried in a confusing menu system, the MR-8 Mk II, unlike some other recorders, actually aids you in capturing your musical ideas. In addition there's great sounding built-in digital effects, guitar amp and mic simulators, handy mix-down effects, plus the ability to hook up to a PC for data editing, and backing up your songs.
You create. Fostex records.
New for the Mk II is the USB host feature which allows for the easy connection of an 'off-the-shelf' CD-R burner via USB. Making CD masters has never been more simple.
Recording time
Recording time in normal mode (16bit/44.1kHz) is approx. 25 track-minutes on the supplied 128MB CF card and 50 track-minutes on a 256MB card. Extended mode (16bit/22.05kHz) doubles the recording time. Note that recording time varies depending on recorded source, punch in/out, undo/redo status, etc.
Features
8 tracks of recording and playback using CompactFlash cards
2 track simultaneous recording
Superb in-built digital effects inc Mic and Amp simulations
USB Host function for CD burning with 'off-the-shelf' CD burner
2 mic inputs with +48V Phantom Power
Details
8-track recording onto CompactFlash Card.
High quality sound recording and playback with uncompressed linear 16-bit/44.1 kHz digital audio (normal mode) with 2 track simultaneous recording and 8 track playback.
LP Mode (16-bit/22.05 kHz) doubles the recording time.
Physical knobs and buttons for intuitive operations. A new dial knob for menu selection.
Newly added +48V Phantom Power on all two Mic Inputs for wider choice of microphones.
USB Host function ready for CD burning on an off-the-shelf external CD-R drive.
Improved 132 x 64 dot-matrix LCD and self illuminating keys visually show the current status.
Improved built-in digital effects including Reverb, Delay as well as Guitar Amp and Microphone simulations
Black colored top panel design
Analog guitar distortion with the dedicated knob on Input A.
Full-track (8-track) bouncing to a "New Song (track 7/8) for PC transfer and CD burning.
Mastering effects for stereo buss.
USB port for stereo WAV file transfer to and from PC
AC and Battery (6 x AA alkaline cells) operation. Approx. 4 hours maximum operation time with batteries. Includes AC adapter.
Built-in microphone for handy song memo.
Two headphones outputs.
Free "WAV Manager" software available for multiple mono files transfer to and from PCTechnical InfoRecording / Playback
Recording medium CompactFlash
Recording time approx. 6 minutes (8-track on 256MB CF) normal mode
Recording format FAT16
Sampling frequency 44.1 kHz (Normal Mode), 22.05 kHz (LP Mode)
Quantization 16-bit linear (non-compression)
A/D converter 24-bit Delta-Sigma
D/A converter 24-bit Delta-Sigma
No. of recording track 8 tracks maximum
No. of simultaneous rec. 2 tracks
Recording/reproduction frequency 20 Hz - 20 kHz (Normal Mode)
Dynamic range 87dB or more (typical) (Normal Mode)
T.H.D. 0.05% or less (typical) (Normal Mode)
Inputs / Outputs
Analog in (input A/B)
Connector XLR-3-31 type (Pin2:hot) and 6mm TRS phone
Input level -48dBV (MIC) - +4dBV (LINE)
Input impedance 1.5k ohm or more 400k ohm or more (GUITAR on INPUT A)
Phantom power P48V (on/off selectable)
Stereo out (L, R)
Connector 6mm stereo phone
Output level -10dBV (unbalance)
Load impedance 10k ohm or more
Headphones (phone 1, 2)
Connector 2 x 6mm stereo phone
Max. output 30mW or more (at 32 ohm)
Load impedance 16 ohm or more
MIDI out
Connector DIN 5 pin
Format MIDI standard
Foot switch
Connector 6mm phone
Level TTL level
USB 2.0 HI-SPEED
Connector B type
USB 1.1
Connector A type
General
Dimensions 286(W) x 220(D) x 65(H) mm
Weight approx. approx. 1.6kgs
Power requirement DC12V, 400mA |
Reviews
There are no reviews yet.