TASCAM TM-80 Condenser Microphone

90.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]

 

Read more

TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.

Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.

  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 – 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)

TM-80 SPECIFICATIONS

  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 – 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM TM-80 Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM TM-80 Condenser Microphone removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeRODE NT-2000 LARGE-DIAPHRAGM CONDESER MICROPHONE removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone remove
NameTASCAM TM-80 Condenser Microphone removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeRODE NT-2000 LARGE-DIAPHRAGM CONDESER MICROPHONE removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone remove
Image
SKUTA/EM/000436E005243H11NE00019H11RD00025H11RD00003E005253
Rating
Price 90.00 incl. GR VAT 80.00 incl. GR VAT 2,959.00 incl. GR VAT 188.00 incl. GR VAT 529.00 incl. GR VAT 80.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentTASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 - 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
  • Microphone capsule assembly features an 18mm pure aluminum diaphragm
  • Cardioid polar pattern
  • Frequency response: 20Hz to 20kHz
  • Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Phantom power requirement: 9 - 48V DC
  • Output impedance : 200ohm +/-30% (at 1kHz)
  • Load impedance : >1k ohm
  • Max SPL : 136dB (at 1kHz=1% THD)
  • S/N ratio : 77dB
  • Housing : Die cast zinc
  • Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
  • Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)

Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone



The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.

 

Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included

 

 

 

Manual Download

Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-324 dB
Equivalent SPL DIN/IEC 65112 dB-A
S/N ratio CCIR 468-370 dB
S/N ratio DIN/IEC 65182 dB
Maximum SPL114 dB for THD
Maximum output voltage8 dBu
Dyn. range of the mic. amplifier DIN/IEC 651102 dB for THD
Supply voltagePower supply N 149 A
Matching connectorMicrophone: DIN 8F, Power Supply: XLR 3F
Weight460 g
Diameter57 mm
Length142 mm
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:

NT2000 - ?Explore, Control, Create?? Seamlessly Variable Dual 1? Condenser Microphone.

The world's first large diaphragm condenser studio microphone with seamlessly variable Polar
Patterns, Filter and Pad located conveniently on the microphone body. The NT2000?s state of
the art surface-mount electronics combined with the new Australian designed and manufactured
HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB
with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.
The NT2000 is supplied with the SM2 Shock Mount, together in a durable custom carry case.

SPECIFICATIONS:
Acoustic principle:
Externally polarised 25 mm (1?) dual diaphragm condenser
Directional pattern: Multipattern
Frequency range:  20Hz - 20KHz
Output impedance: 200 ohms
Signal noise ratio din iec 651:  87 dB (1kHz rel 1Pa)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1K ohm) 157dB (@ 1% THD into 1K ohm) with pad set to maximum
Sensitivity:
-36 db re 1 Volt/Pasca (16 mv @94db SPL) +/- 2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: Phantom P48
Weight without battery: 831 gm
Weight with battery:  2.6 kg
 

Behringer C-3 Dual-Diaphragm Studio Condenser Microphone Introducing the Professional Condenser Microphone C-3 from BEHRINGER Our latest dual-diaphragm condenser microphone C-3 is ideal for high-quality studio recording and live applications. The selectable omnidirectional, cardioid, and figure-eight pickup patterns offer ultimate versatility needed to professionally record vocals and acoustic instruments. The C-3 holds a pressure-gradient transducer with a shock-mounted dual-diaphragm capsule. Its ultra-high sound resolution and flat frequency response rival those of microphones with much higher price tags. It also includes an LED that indicates phantom power operation and a gold-plated XLR output connector to ensure highest signal integrity. The C-3 comes with extensive accessories such as swivel stand and transport case. The C-3 represents state-of-the-art technology at a price that is simply unheard of.
Weight2.50 kg0.40 kg0.46 kg3.00 kg3.00 kg0.45 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 0.40 kg
Weight 0.46 kg
Weight 3.00 kg
Weight 3.00 kg
Weight 0.45 kg

Recently Viewed Products