TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.
Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 – 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 – 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Weight
2.50 kg
Reviews
There are no reviews yet.
Be the first to review “TASCAM TM-80 Condenser Microphone” Cancel reply
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.
Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 - 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 - 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Large diaphragm cardioid microphone
Pressure gradient transducer with with one-diaphragm capsule
Transformerless circuitry
Extremely low noise: 7 dB-A
Includes swivel mount
Straightforward handling for homerecording and professional studios
High-quality professional equipment for limited budgets
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
23 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1 kohms
Equivalent noise level, CCIR1)
17.5 dB
Equivalent noise level, A-weighted1)
7 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL)
76.5 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL)
87 dB
Maximum SPL for THD 0.5%2)
138 dB
Maximum output voltage
13 dBu
Dynamic range of the microphone amplifier (A-weighted)
131 dB
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Current consumption (P48, IEC 61938)
3 mA
Matching connector
XLR3F
Weight
approx. 450 g
Diameter
60 mm
Length
132 mm
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.
Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included
Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.
Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.
An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern
cardioid
Frequency range
20 to 20,000 Hz
Sensitivity
25 mV/Pa (-32 dBV)
Max. SPL
140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3)
25 dB
Equivalent noise level
14 dB-A
Signal/noise ratio (A-weighted)
80 dB
Preattenuation pad
10 dB, switchable
Bass filter
6 dB/octave below 500 Hz
Impedance
200 ohms
Recommended load impedance
>1000 ohms
Supply voltage
9 to 52 V phantom power to DIN 45596
Current consumption
Connector
3-pin XLR
Finish
silver gray
Net weight
320 g / 11.3 oz.
Shipping weight
950 g / 2.1 lbs.
Patent(s)
Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
AKG C214 – large 1” diaphragm microphone with cardioid polar pattern, frequency response: 20Hz-20kHz, 20dB pad, requires phantom power (12-52V), XLR connector. Includes clip, case and windshield. Dimensions: 160 x 55mm. Weight: 280g, optional microphone holder SA61
The C214 professional large-diaphragm condenser microphone has been designed as a cost-effective alternative to the high-end C414 family. Like the C414, the C214 offers a supreme one-inch capsule on an integrated suspension to reduce mechanical noise. A switchable 20dB attenuation pad allows recording of loud sources of up to 156dB SPL. A switchable bass-cut filter allows close-up recording with almost no proximity effect.
The C214 captures sound by combining one capsule of the legendary C414 dual-capsule system and the patented AKG Back-Plate Technology, resulting in an outstanding performance close to the famous C414 XLII.
Sonic character of the C414 XLII
for beautifully detailed recording of lead vocals and solo instruments
Outstanding dynamic range and ultralow noise
for close-up recording of high-output sources of up to 156dB SPL
Switchable 20dB attenuator and bass-cut filter
for close-up recording and reduction of proximity effect
Integrated suspension
to reduce mechanical noise and vibration from stage
Roadworthy design
all-metal die-cast body with shock- and scratch-resistant finish
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.