Content |
With the Impact-Mini you get amazing bass in a tiny cabinet that is almost the same size as the MiniVee-8, but at a very budget-friendly price. This engineering marvel is lightweight with an aluminum cone, furniture-quality cabinet finish and concentrates its 300 watts of output power in the 38 Hz to 140 Hz range. This is Velodyne's lightest weight subwoofer and includes an adjustable low pass crossover frequency so you can easily match the Impact-Mini to your satellite speakers.
Features
Compact, stylish cabinet; high-value subwoofer
6.5" active and 8" passive andonized aluminum woofers
High quality, long throw drivers
2" copper-wound voice coil for exceptional reliability
Down-firing bass radiator for more output, less distortion
"Green” MDP amp rated at 300 watts Dynamic power
User's Manual Specifications
| Amplifier Output: 500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit 40 - 120Hz Variable
Variable Low Pass Filter Alignment Active 4th order 24dB/octave (two-stage filter)
Cabinet Specification: Sealed Cabinet with 25mm M.D.F construction and internal bracing.
Amplifier Classification: Class-D amplifier
Driver Compliment: 1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil.
Dimensions:
(H x W x D) 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
Weight: (unpacked) 22.56Kg (49.63lbs)
Mains Input Voltage: 100 - 120 Vac, 220 - 240 Vac, 50/60Hz
Input Impedance 20Kohms
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak) Frequency Response: 16Hz to 40/160Hz variable Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from 12 - 36dB/Octave Sub-Sonic Filter (High Pass): 16Hz - 31Hz EQ: 4 x Presets 1 x User Setting Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB increments from -31 to -80dB) Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time 5, 10, 15, 20, 25 & 30 minutes Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º Internal Memory: 3 Independent memory locations Cabinet Specification: Sealed Cabinet with 25mm thick M.D.F construction with critical internal bracing Amplifier Classification: Class-D amplifier with DSP control Driver Complement: 1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil External Dimensions - Excluding Plinth: Width: 485mm (19 inches) Height: 455mm (18 inches) Depth: 475mm (18 3/4 inches) Weight: 50 Kg (110lbs) Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set) Trigger Input: 3.5mm Jack input, +12Vdc = On State User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Length No
Accessories Mic, mic stand, remote control
Amplifier 360 watts Dynamic/180 watts RMS Power
Auto On/Off Yes
Cabinet Design Extended Excursion Down-firing port
Color Black Ash Wood Grain
Dimensions: (H/W/D) 14.5" x 13.25" x 14.875" (36.8 x 33.7 x 37.8 cm)
HiPass Crossover 80 Hz*, 6 dB/octave
LoPass Crossover 40-120 Hz adjustable (12 dB octave, 24 dB ultimate)
Phase Control 0, 90, 180, 270 Degrees
Removable Grille Yes
Shipping Weight 31 lbs. (14 kg)
Size No
Voice Coil 2-Layer copper
Warranty (N. Am.) Two years (electronics & drivers - parts & labor)
|
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Description Active closed-box subwoofer system
Drive unit 2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power consumption: 110W (105W - 100V version)
Input impedance: 100kΩ
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
|
Crossover Tuning
Mushrooms
Description Active closed-box subwoofer system
Drive unit ø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension -6dB at 18Hz (position A)
-6dB at 23Hz (position B)
-6dB at 28Hz (position C)
Amplifier Power output: 500W
Rated power consumption: 98W / 1W standby
Input impedance: 33kΩ
Signal / noise: >90dB
Functions: Input level (line in)
Input level (speaker in)
Low-pass filter frequency (line in only)
Low-pass filter bypass
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker in (Binding post)
12v trigger (3.5mm jack)
Low-pass filter
Active 4th-order, variable cut-off frequency
Dimensions Height: 325mm (12.8 in) not including feet
Width: 325mm (12.8 in)
Depth: 375mm (14.8 in) including grille and controls
Net weight 15.5kg (34.4 lb)
Finishes Matte Black
|
Reviews
There are no reviews yet.