Content |
Length No
Accessories Remote Control, Digital Drive Plus Accessory Kit, Video Cable
Amplifier 3000 watts Dynamic, 1250 watts RMS Power
Auto On/Off Yes
Cabinet Design Sealed servo enclosure
Dimensions: (H/W/D) 22.7" x20.7" 25.6" (58cm x 53cm x 65cm)
HiPass Crossover 80 or 100 Hz at 6 dB/octave
LoPass Crossover 40 Hz to 199 Hz (variable in 1 Hz increments) selectable slope Default: 80 Hz @ 24 dB/Octave
Phase Control 0, 180 Degrees
Removable Grille Yes
Shipping Weight 140 lbs. (64 kg)
Size No
Voice Coil Six-layer, 75mm
Warranty (N. Am.) Two years (electronics & drivers - parts & labor)
|
A subwoofer designed specifically to shine alongside the rest of the BMR-driven Aero speakers, it adds phenomenal amounts of depth and power to your music and movies.
Features
500W power
10" front-firing subwoofer driver
10" down-firing ABR (Auxiliary Bass Radiator)
Premium construction
Rated output power 500W
Frequency response 21Hz - 200Hz
Drivers 1 x 10" (250mm) front-firing subwoofer
1 x 10" (250mm) down-firing ABR
Crossover Active - variable 40Hz - 200Hz
Colour Black
Dimensions (WxHxD) 330 x 340 x 355mm (13.0 x 13.4 x 14.0“)
Weight 11.7kg (25.8lbs) each
|
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak) Frequency Response: 16Hz to 40/160Hz variable Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from 12 - 36dB/Octave Sub-Sonic Filter (High Pass): 16Hz - 31Hz EQ: 4 x Presets 1 x User Setting Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB increments from -31 to -80dB) Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time 5, 10, 15, 20, 25 & 30 minutes Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º Internal Memory: 3 Independent memory locations Cabinet Specification: Sealed Cabinet with 25mm thick M.D.F construction with critical internal bracing Amplifier Classification: Class-D amplifier with DSP control Driver Complement: 1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil External Dimensions - Excluding Plinth: Width: 485mm (19 inches) Height: 455mm (18 inches) Depth: 475mm (18 3/4 inches) Weight: 50 Kg (110lbs) Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set) Trigger Input: 3.5mm Jack input, +12Vdc = On State User's Manual AVAILABLE IN THESE COLOR FINISHES
|
The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality
Features Rigid MDF cabinet 70W RMS amplifier 8-inch long-throw woofer Individual controls to tailor volume, crossover frequency and phase adjustment
Sensitivity 180mV for full power output Frequency response 34Hz - 150Hz Rated output power 70W Drive units 1 x 8" (203mm) long throw woofer Crossover 50 - 150Hz continuous/active Max. power consumption 100W Colour Black Dimensions (WxHxD) 300 x 300 x 310mm (11.8 x 11.8 x 12.2“) Weight 7.7kg (17lbs) |
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Upper Frequency Limit: 40 - 120 Hz Variable Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Power Output 650 watts Continuous. 1200 watts (peak) Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) Equalisation 4 Settings (Off/Music/Movie/Impact) Phase Control 0-90-180-270 degrees Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed Digital Volume Level -60 to +10dB in 1dB increments Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil 12V Trigger Input 3.5mm mono jack socket Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches) Grille Depth 28 mm (1 1/8 Inches) Weight (unpacked) 35.3 kg (77.6 lbs) Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant) Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific) IR Remote Control Code NEC SH6122 AVAILABLE IN SIX COLOR FINISHES
|
Reviews
There are no reviews yet.